linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Matthias Brugger <mbrugger@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-rpi-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-mmc@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH 04/18] ARM: dts: bcm283x: Define MMC interfaces at board level
Date: Mon, 22 Jul 2019 07:54:35 +0200	[thread overview]
Message-ID: <1563774880-8061-5-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>

Starting with RPi 4 this is the first board, which doesn't use sdhost
as default SD interface. So the MMC interfaces should be defined finally at
board level. Since all boards using sdhci already does this, we can drop the
pinctrl part from bcm2835-rpi.dtsi.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts  |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi-a.dts       |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts  |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts  |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi-b.dts       |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts  |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi-zero.dts    |  7 +++++++
 arch/arm/boot/dts/bcm2835-rpi.dtsi        | 13 -------------
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts     |  7 +++++++
 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts |  7 +++++++
 11 files changed, 70 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index db8a601..cb3f08d 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -107,6 +107,13 @@
 	status = "okay";
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 067d1f0..2d167d9 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -102,6 +102,13 @@
 	status = "okay";
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 1e40d67..83a3a60 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -109,6 +109,13 @@
 	status = "okay";
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 28e7513..b6b4fea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -102,6 +102,13 @@
 	status = "okay";
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 31ff602..b5782fa 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -97,6 +97,13 @@
 	status = "okay";
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
index 4764a25..41afea4 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
@@ -81,6 +81,13 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index ba0167d..5ecc403 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -116,6 +116,13 @@
 	};
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 3b35a8a..84c7035 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -98,6 +98,13 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 715d50c..40bac52e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -68,19 +68,6 @@
 	status = "okay";
 };

-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio48>;
-	bus-width = <4>;
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
-
 &usb {
 	power-domains = <&power RPI_POWER_DOMAIN_USB>;
 };
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 7b4e651..f97ec95 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -113,6 +113,13 @@
 	status = "okay";
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 6c8233a..433e306 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -80,6 +80,13 @@
 	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
 };

+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;
--
2.7.4


  parent reply	other threads:[~2019-07-22  5:56 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22  5:54 [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-07-22  5:54 ` [PATCH 01/18] ARM: bcm283x: Reduce register ranges for UART, SPI and I2C Stefan Wahren
2019-07-24 20:01   ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 02/18] ARM: bcm2835: DMA can only address 1GB Stefan Wahren
2019-07-22  5:54 ` [PATCH 03/18] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-07-22 17:54   ` Eric Anholt
2019-07-22  5:54 ` Stefan Wahren [this message]
2019-08-12 21:03   ` [PATCH 04/18] ARM: dts: bcm283x: Define MMC interfaces at board level Stefan Wahren
2019-07-22  5:54 ` [PATCH 05/18] ARM: dts: bcm283x: Define memory " Stefan Wahren
2019-08-12 21:02   ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 06/18] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren
2019-07-22  5:54 ` [PATCH 07/18] clk: bcm2835: Introduce SoC specific clock registration Stefan Wahren
2019-07-22 10:30   ` Matthias Brugger
2019-08-11 20:43   ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 08/18] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren
2019-07-22 10:30   ` Matthias Brugger
2019-07-22  5:54 ` [PATCH 09/18] dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2 Stefan Wahren
2019-07-22 10:31   ` Matthias Brugger
2019-07-24 14:08   ` Ulf Hansson
2019-07-22 11:26 ` [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Matthias Brugger
2019-07-22 13:18 ` Nicolas Saenz Julienne
2019-07-22 18:10   ` Stefan Wahren
2019-07-23  9:34     ` Christoph Hellwig
2019-07-23 13:32       ` Nicolas Saenz Julienne
2019-07-23 14:33         ` Christoph Hellwig
2019-07-23 16:26         ` Stefan Wahren
2019-07-23 17:33           ` Nicolas Saenz Julienne
2019-07-23 21:30             ` Stefan Wahren
2019-07-24  2:53             ` Chen-Yu Tsai
2019-07-24  8:37               ` Nicolas Saenz Julienne
2019-07-25  8:22             ` Nicolas Saenz Julienne
2019-07-25 22:09               ` Stefan Wahren
2019-07-22 18:01 ` Eric Anholt
2019-07-28 11:22 ` Stefan Wahren
2019-08-05  9:33   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563774880-8061-5-git-send-email-wahrenst@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=adrian.hunter@intel.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=mbrugger@suse.com \
    --cc=mturquette@baylibre.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sbranden@broadcom.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).