linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Andrea della Porta <andrea.porta@suse.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	devicetree@vger.kernel.org,  Conor Dooley <conor+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Adrian Hunter <adrian.hunter@intel.com>,
	linux-mmc@vger.kernel.org,  Phil Elwell <phil@raspberrypi.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	 Jonathan Bell <jonathan@raspberrypi.com>,
	 Florian Fainelli <florian.fainelli@broadcom.com>,
	 Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>,
	 linux-arm-kernel@lists.infradead.org,
	linux-gpio@vger.kernel.org,  Kamal Dasu <kamal.dasu@broadcom.com>,
	Al Cooper <alcooperx@gmail.com>,
	 linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/6] Add support for BCM2712 SD card controller
Date: Mon, 15 Apr 2024 13:47:35 -0500	[thread overview]
Message-ID: <171320635602.5208.10027482544965026256.robh@kernel.org> (raw)
In-Reply-To: <cover.1713036964.git.andrea.porta@suse.com>


On Sun, 14 Apr 2024 00:14:22 +0200, Andrea della Porta wrote:
> Hi,
> 
> This patchset adds support for the SDHCI controller on Broadcom BCM2712
> SoC in order to make it possible to boot (particularly) Raspberry Pi 5
> from SD card. This work is heavily based on downstream contributions.
> 
> Patch #1 and 2: introduce the dt binding definitions for, respectively,
> the new pin cfg/mux controller and the SD host controller as a preparatory
> step for the upcoming dts.
> 
> Patch #3: add a somewhat reasonable (*almost* bare-minimum) dts to be used
> to boot Rpi5 boards. Since till now there was no support at all for any
> 2712 based chipset, both the SoC and board dts plus definitions for the
> new Pin and SD host controller have been added.
> 
> Patch #4: the driver supporting the pin controller. Based on [1] and
> successive fix commits.
> 
> Patch #5: add SDHCI support. Based on [2] and the next 2 fix commits.
> Drop the SD Express implementation for now, that will be added by patch
> #6.
> 
> Patch #6: this patch offers SD Express support and can be considered totally
> optional. The callback plumbing is slightly different w.r.t. the downstream
> approach (see [3]), as explained in the patch comment. Not sure what is the best,
> any comment is highly appreciated.
> 
> Tested succesfully on Raspberry Pi 5 using an SDxC card as the boot device.
> 
> Still untested:
> - SD Express due to the lack of an Express capable card.
>   Also, it will need PCIe support first.
> - card detection pin, since the sd was the booting and root fs device.
> 
> Many thanks,
> Andrea
> 
> Links:
> [1] - https://github.com/raspberrypi/linux/commit/d9b655314a826724538867bf9b6c229d04c25d84
> [2] - https://github.com/raspberrypi/linux/commit/e3aa070496e840e72a4dc384718690ea4125fa6a
> [3] - https://github.com/raspberrypi/linux/commit/eb1df34db2a9a5b752eba40ee298c4ae87e26e87
> 
> Andrea della Porta (6):
>   dt-bindings: pinctrl: Add support for BCM2712 pin controller
>   dt-bindings: mmc: Add support for BCM2712 SD host controller
>   arm64: dts: broadcom: Add support for BCM2712
>   pinctrl: bcm: Add pinconf/pinmux controller driver for BCM2712
>   mmc: sdhci-brcmstb: Add BCM2712 support
>   mmc: sdhci-brcmstb: Add BCM2712 SD Express support
> 
>  .../bindings/mmc/brcm,sdhci-brcmstb.yaml      |   51 +-
>  .../pinctrl/brcm,bcm2712-pinctrl.yaml         |   99 ++
>  arch/arm64/boot/dts/broadcom/Makefile         |    1 +
>  .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     |  313 +++++
>  arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi |   81 ++
>  arch/arm64/boot/dts/broadcom/bcm2712.dtsi     |  841 +++++++++++
>  drivers/mmc/host/Kconfig                      |    1 +
>  drivers/mmc/host/sdhci-brcmstb.c              |  275 ++++
>  drivers/pinctrl/bcm/Kconfig                   |    9 +
>  drivers/pinctrl/bcm/Makefile                  |    1 +
>  drivers/pinctrl/bcm/pinctrl-bcm2712.c         | 1247 +++++++++++++++++
>  11 files changed, 2918 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
>  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
>  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
>  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712.dtsi
>  create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2712.c
> 
> --
> 2.35.3
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y broadcom/bcm2712-rpi-5-b.dtb' for cover.1713036964.git.andrea.porta@suse.com:

arch/arm64/boot/dts/broadcom/bcm2712.dtsi:554.26-565.5: Warning (interrupt_provider): /soc/gpio@7d517c00: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts:201.10-206.3
  also defined at arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts:259.10-288.3
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /: failed to match any schema with compatible: ['raspberrypi,5-model-b', 'brcm,bcm2712']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /: failed to match any schema with compatible: ['raspberrypi,5-model-b', 'brcm,bcm2712']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: thermal-zones: cpu-thermal:trips:phandle: [[43]] is not of type 'object'
	from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: soc: firmware: {'compatible': ['raspberrypi,bcm2835-firmware', 'simple-mfd'], '#address-cells': [[1]], '#size-cells': [[1]], 'mboxes': [[15]], 'dma-ranges': True, 'phandle': [[16]], 'clocks': {'compatible': ['raspberrypi,firmware-clocks'], '#clock-cells': [[1]], 'phandle': [[95]]}, 'reset': {'compatible': ['raspberrypi,firmware-reset'], '#reset-cells': [[1]], 'phandle': [[96]]}} should not be valid under {'type': 'object'}
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: soc: power: {'compatible': ['raspberrypi,bcm2835-power'], 'firmware': [[16]], '#power-domain-cells': [[1]], 'phandle': [[97]]} should not be valid under {'type': 'object'}
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: soc: fixedregulator_3v3: {'compatible': ['regulator-fixed'], 'regulator-always-on': True, 'regulator-max-microvolt': [[3300000]], 'regulator-min-microvolt': [[3300000]], 'regulator-name': ['3v3'], 'phandle': [[98]]} should not be valid under {'type': 'object'}
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: soc: fixedregulator_5v0: {'compatible': ['regulator-fixed'], 'regulator-always-on': True, 'regulator-max-microvolt': [[5000000]], 'regulator-min-microvolt': [[5000000]], 'regulator-name': ['5v0'], 'phandle': [[99]]} should not be valid under {'type': 'object'}
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/timer@7c003000: failed to match any schema with compatible: ['brcm,bcm2835-system-timer']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/local_intc@7cd00000: failed to match any schema with compatible: ['brcm,bcm2836-l1-intc']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/i2s@7d003000: failed to match any schema with compatible: ['brcm,bcm2835-i2s']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/spi@7d004000: failed to match any schema with compatible: ['brcm,bcm2835-spi']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/spi@7d004000/spidev@0: failed to match any schema with compatible: ['spidev']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/spi@7d004600: failed to match any schema with compatible: ['brcm,bcm2835-spi']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/spi@7d004800: failed to match any schema with compatible: ['brcm,bcm2835-spi']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/spi@7d004a00: failed to match any schema with compatible: ['brcm,bcm2835-spi']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/spi@7d004c00: failed to match any schema with compatible: ['brcm,bcm2835-spi']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pwm@7d00c000: 'assigned-clocks' is a dependency of 'assigned-clock-rates'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pwm@7d00c800: 'assigned-clocks' is a dependency of 'assigned-clock-rates'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/cprman@7d202000: failed to match any schema with compatible: ['brcm,bcm2711-cprman']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: intc@7d503000: $nodename:0: 'intc@7d503000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: intc@7d508380: $nodename:0: 'intc@7d508380' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: intc@7d508400: $nodename:0: 'intc@7d508400' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: gpio@7d508500: compatible:0: 'brcm,brcmstb-gpio' is not one of ['brcm,bcm7445-gpio']
	from schema $id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: gpio@7d508500: compatible: ['brcm,brcmstb-gpio'] is too short
	from schema $id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: gpio@7d508500: 'brcm,gpio-direct', 'gpio-line-names' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: intc@7d517000: $nodename:0: 'intc@7d517000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pwm@7d517a80: #pwm-cells:0:0: 2 was expected
	from schema $id: http://devicetree.org/schemas/pwm/brcm,bcm7038-pwm.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: intc@7d517ac0: $nodename:0: 'intc@7d517ac0' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: intc@7d517b00: $nodename:0: 'intc@7d517b00' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: gpio@7d517c00: compatible:0: 'brcm,brcmstb-gpio' is not one of ['brcm,bcm7445-gpio']
	from schema $id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: gpio@7d517c00: compatible: ['brcm,brcmstb-gpio'] is too short
	from schema $id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: gpio@7d517c00: 'brcm,gpio-direct', 'gpio-line-names' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/avs-monitor@7d542000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: firmware: '#address-cells', '#size-cells', 'dma-ranges' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc/power: failed to match any schema with compatible: ['raspberrypi,bcm2835-power']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: l3-cache: 'cache-unified' is a dependency of 'cache-size'
	from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: l3-cache: 'cache-unified' is a dependency of 'cache-sets'
	from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: l3-cache: 'cache-unified' is a dependency of 'cache-line-size'
	from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: l3-cache: 'cache-unified' is a required property
	from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: l3-cache: Unevaluated properties are not allowed ('cache-level', 'cache-line-size', 'cache-sets', 'cache-size' were unexpected)
	from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pwr_button: 'pwr' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#






      parent reply	other threads:[~2024-04-15 18:47 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-13 22:14 [PATCH 0/6] Add support for BCM2712 SD card controller Andrea della Porta
2024-04-13 22:14 ` [PATCH 1/6] dt-bindings: pinctrl: Add support for BCM2712 pin controller Andrea della Porta
2024-04-13 23:22   ` Rob Herring
2024-04-14  6:09   ` Krzysztof Kozlowski
2024-04-14 15:45   ` Florian Fainelli
2024-04-16 12:59     ` Linus Walleij
2024-04-27 10:55     ` Andrea della Porta
2024-04-13 22:14 ` [PATCH 2/6] dt-bindings: mmc: Add support for BCM2712 SD host controller Andrea della Porta
2024-04-13 23:22   ` Rob Herring
2024-04-14  6:11   ` Krzysztof Kozlowski
2024-04-14 15:55   ` Florian Fainelli
2024-04-13 22:14 ` [PATCH 3/6] arm64: dts: broadcom: Add support for BCM2712 Andrea della Porta
2024-04-14  6:22   ` Krzysztof Kozlowski
2024-04-14 16:01   ` Florian Fainelli
2024-04-27 11:02     ` Andrea della Porta
2024-04-15  8:20   ` Stefan Wahren
2024-04-15  8:52     ` Phil Elwell
2024-04-15  9:06       ` Stefan Wahren
2024-04-15 10:43         ` Phil Elwell
2024-04-13 22:14 ` [PATCH 4/6] pinctrl: bcm: Add pinconf/pinmux controller driver " Andrea della Porta
2024-04-14  7:19   ` Christophe JAILLET
2024-04-27 11:04     ` Andrea della Porta
2024-04-14 16:00   ` Florian Fainelli
2024-04-27 11:06     ` Andrea della Porta
2024-04-16 13:07   ` Linus Walleij
2024-04-27 11:13     ` Andrea della Porta
2024-04-13 22:14 ` [PATCH 5/6] mmc: sdhci-brcmstb: Add BCM2712 support Andrea della Porta
2024-04-14  6:25   ` Krzysztof Kozlowski
2024-04-14  7:28   ` Christophe JAILLET
2024-04-14 15:53   ` Florian Fainelli
2024-04-13 22:14 ` [PATCH 6/6] mmc: sdhci-brcmstb: Add BCM2712 SD Express support Andrea della Porta
2024-04-14  7:34   ` Christophe JAILLET
2024-04-27 11:16     ` Andrea della Porta
2024-04-14 15:55   ` Florian Fainelli
2024-04-27 11:21     ` Andrea della Porta
2024-04-14 10:07 ` [PATCH 0/6] Add support for BCM2712 SD card controller Stefan Wahren
2024-05-02  9:12   ` Andrea della Porta
2024-04-14 15:54 ` Florian Fainelli
2024-04-15 18:47 ` Rob Herring [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=171320635602.5208.10027482544965026256.robh@kernel.org \
    --to=robh@kernel.org \
    --cc=adrian.hunter@intel.com \
    --cc=alcooperx@gmail.com \
    --cc=andrea.porta@suse.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.fainelli@broadcom.com \
    --cc=jonathan@raspberrypi.com \
    --cc=kamal.dasu@broadcom.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=phil@raspberrypi.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).