From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Martin Schiller <ms@dev.tdt.de>, John Crispin <john@phrozen.org>,
Linus Walleij <linus.walleij@linaro.org>,
Sasha Levin <sashal@kernel.org>,
linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 037/127] pinctrl: xway: fix gpio-hog related boot issues
Date: Fri, 22 Nov 2019 00:54:15 -0500 [thread overview]
Message-ID: <20191122055544.3299-36-sashal@kernel.org> (raw)
In-Reply-To: <20191122055544.3299-1-sashal@kernel.org>
From: Martin Schiller <ms@dev.tdt.de>
[ Upstream commit 9b4924da4711674e62d97d4f5360446cc78337af ]
This patch is based on commit a86caa9ba5d7 ("pinctrl: msm: fix gpio-hog
related boot issues").
It fixes the issue that the gpio ranges needs to be defined before
gpiochip_add().
Therefore, we also have to swap the order of registering the pinctrl
driver and registering the gpio chip.
You also have to add the "gpio-ranges" property to the pinctrl device
node to get it finally working.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-xway.c | 39 +++++++++++++++++++++++-----------
1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
index f9e98a7d4f0ce..1b0c5958c56a7 100644
--- a/drivers/pinctrl/pinctrl-xway.c
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -1748,14 +1748,6 @@ static int pinmux_xway_probe(struct platform_device *pdev)
}
xway_pctrl_desc.pins = xway_info.pads;
- /* register the gpio chip */
- xway_chip.parent = &pdev->dev;
- ret = devm_gpiochip_add_data(&pdev->dev, &xway_chip, NULL);
- if (ret) {
- dev_err(&pdev->dev, "Failed to register gpio chip\n");
- return ret;
- }
-
/* setup the data needed by pinctrl */
xway_pctrl_desc.name = dev_name(&pdev->dev);
xway_pctrl_desc.npins = xway_chip.ngpio;
@@ -1777,10 +1769,33 @@ static int pinmux_xway_probe(struct platform_device *pdev)
return ret;
}
- /* finish with registering the gpio range in pinctrl */
- xway_gpio_range.npins = xway_chip.ngpio;
- xway_gpio_range.base = xway_chip.base;
- pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range);
+ /* register the gpio chip */
+ xway_chip.parent = &pdev->dev;
+ xway_chip.owner = THIS_MODULE;
+ xway_chip.of_node = pdev->dev.of_node;
+ ret = devm_gpiochip_add_data(&pdev->dev, &xway_chip, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register gpio chip\n");
+ return ret;
+ }
+
+ /*
+ * For DeviceTree-supported systems, the gpio core checks the
+ * pinctrl's device node for the "gpio-ranges" property.
+ * If it is present, it takes care of adding the pin ranges
+ * for the driver. In this case the driver can skip ahead.
+ *
+ * In order to remain compatible with older, existing DeviceTree
+ * files which don't set the "gpio-ranges" property or systems that
+ * utilize ACPI the driver has to call gpiochip_add_pin_range().
+ */
+ if (!of_property_read_bool(pdev->dev.of_node, "gpio-ranges")) {
+ /* finish with registering the gpio range in pinctrl */
+ xway_gpio_range.npins = xway_chip.ngpio;
+ xway_gpio_range.base = xway_chip.base;
+ pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range);
+ }
+
dev_info(&pdev->dev, "Init done\n");
return 0;
}
--
2.20.1
next prev parent reply other threads:[~2019-11-22 6:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191122055544.3299-1-sashal@kernel.org>
2019-11-22 5:54 ` [PATCH AUTOSEL 4.14 026/127] gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB Sasha Levin
2019-11-22 5:54 ` Sasha Levin [this message]
2019-11-22 5:54 ` [PATCH AUTOSEL 4.14 043/127] pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration Sasha Levin
2019-11-22 5:54 ` [PATCH AUTOSEL 4.14 044/127] pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191122055544.3299-36-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=john@phrozen.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ms@dev.tdt.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).