linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Kent Gibson <warthog618@gmail.com>
Cc: linux-gpio <linux-gpio@vger.kernel.org>
Subject: Re: [libgpiod][PATCH v3 02/14] tests: add tests for bias flags
Date: Thu, 28 Nov 2019 11:28:57 +0100	[thread overview]
Message-ID: <CAMpxmJX5Zc5V1vRx8bx-s=q_Dytkb1pU24CxwRqOtK13fff6Cg@mail.gmail.com> (raw)
In-Reply-To: <20191125143157.26154-3-warthog618@gmail.com>

pon., 25 lis 2019 o 15:32 Kent Gibson <warthog618@gmail.com> napisał(a):
>
> Extend test coverage over the bias flags, gpiod_line_bias and the extended
> ctxless functions.
>
> Also update existing tests to check bias flags where line state is checked.
>

The kernel changes this relies on will first be available in v5.5, so
you need to change MIN_KERNEL_VERSION here and elsewhere (C++ and
Python tests).


> Signed-off-by: Kent Gibson <warthog618@gmail.com>
> ---
>  tests/tests-ctxless.c |  64 +++++++++++++++++++++-
>  tests/tests-event.c   | 120 ++++++++++++++++++++++++++++++++++++++++++
>  tests/tests-line.c    |  98 ++++++++++++++++++++++++++++++++++
>  3 files changed, 280 insertions(+), 2 deletions(-)
>
> diff --git a/tests/tests-ctxless.c b/tests/tests-ctxless.c
> index c1e1ca6..76b9a7c 100644
> --- a/tests/tests-ctxless.c
> +++ b/tests/tests-ctxless.c
> @@ -26,11 +26,41 @@ GPIOD_TEST_CASE(get_value, 0, { 8 })
>         g_assert_cmpint(ret, ==, 1);
>  }
>
> -static void set_value_check(gpointer data G_GNUC_UNUSED)
> +GPIOD_TEST_CASE(get_value_ext, 0, { 8 })
> +{
> +       gint ret;
> +
> +       ret = gpiod_ctxless_get_value_ext(gpiod_test_chip_name(0), 3,
> +                               false, GPIOD_TEST_CONSUMER,
> +                               GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       ret = gpiod_ctxless_get_value_ext(gpiod_test_chip_name(0), 3,
> +                               false, GPIOD_TEST_CONSUMER,
> +                               GPIOD_CTXLESS_FLAG_BIAS_PULL_UP);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_ctxless_get_value_ext(gpiod_test_chip_name(0), 3,
> +                               true, GPIOD_TEST_CONSUMER
> +                               , GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_ctxless_get_value_ext(gpiod_test_chip_name(0), 3,
> +                               true, GPIOD_TEST_CONSUMER,
> +                               GPIOD_CTXLESS_FLAG_BIAS_PULL_UP);
> +       g_assert_cmpint(ret, ==, 0);
> +}
> +
> +static void set_value_check_hi(gpointer data G_GNUC_UNUSED)
>  {
>         g_assert_cmpint(gpiod_test_chip_get_value(0, 3), ==, 1);
>  }
>
> +static void set_value_check_lo(gpointer data G_GNUC_UNUSED)
> +{
> +       g_assert_cmpint(gpiod_test_chip_get_value(0, 3), ==, 0);
> +}
> +
>  GPIOD_TEST_CASE(set_value, 0, { 8 })
>  {
>         gint ret;
> @@ -39,13 +69,43 @@ GPIOD_TEST_CASE(set_value, 0, { 8 })
>
>         ret = gpiod_ctxless_set_value(gpiod_test_chip_name(0), 3, 1,
>                                       false, GPIOD_TEST_CONSUMER,
> -                                     set_value_check, NULL);
> +                                     set_value_check_hi, NULL);
>         gpiod_test_return_if_failed();
>         g_assert_cmpint(ret, ==, 0);
>
>         g_assert_cmpint(gpiod_test_chip_get_value(0, 3), ==, 0);
>  }
>
> +GPIOD_TEST_CASE(set_value_ext, 0, { 8 })
> +{
> +       gint ret;
> +
> +       gpiod_test_chip_set_pull(0, 3, 0);
> +
> +       ret = gpiod_ctxless_set_value_ext(gpiod_test_chip_name(0), 3, 1,
> +                       false, GPIOD_TEST_CONSUMER,
> +                       set_value_check_hi, NULL, 0);
> +       gpiod_test_return_if_failed();
> +       g_assert_cmpint(ret, ==, 0);
> +       g_assert_cmpint(gpiod_test_chip_get_value(0, 3), ==, 0);
> +
> +       /* test drive flags by checking that sets are caught by emulation */
> +       ret = gpiod_ctxless_set_value_ext(gpiod_test_chip_name(0), 3, 1,
> +                       false, GPIOD_TEST_CONSUMER, set_value_check_lo,
> +                       NULL, GPIOD_CTXLESS_FLAG_OPEN_DRAIN);
> +       gpiod_test_return_if_failed();
> +       g_assert_cmpint(ret, ==, 0);
> +       g_assert_cmpint(gpiod_test_chip_get_value(0, 3), ==, 0);
> +
> +       gpiod_test_chip_set_pull(0, 3, 1);
> +       ret = gpiod_ctxless_set_value_ext(gpiod_test_chip_name(0), 3, 0,
> +                       false, GPIOD_TEST_CONSUMER, set_value_check_hi,
> +                       NULL, GPIOD_CTXLESS_FLAG_OPEN_SOURCE);
> +       gpiod_test_return_if_failed();
> +       g_assert_cmpint(ret, ==, 0);
> +       g_assert_cmpint(gpiod_test_chip_get_value(0, 3), ==, 1);
> +}
> +
>  static const guint get_value_multiple_offsets[] = {
>         1, 3, 4, 5, 6, 7, 8, 9, 13, 14
>  };
> diff --git a/tests/tests-event.c b/tests/tests-event.c
> index 28b77ec..d425d1a 100644
> --- a/tests/tests-event.c
> +++ b/tests/tests-event.c
> @@ -196,6 +196,126 @@ GPIOD_TEST_CASE(both_edges_active_low, 0, { 8 })
>         g_assert_cmpint(ev.event_type, ==, GPIOD_LINE_EVENT_RISING_EDGE);
>  }
>
> +GPIOD_TEST_CASE(both_edges_bias_disable, 0, { 8 })
> +{
> +       g_autoptr(GpiodTestEventThread) ev_thread = NULL;
> +       g_autoptr(gpiod_chip_struct) chip = NULL;
> +       struct timespec ts = { 1, 0 };
> +       struct gpiod_line_event ev;
> +       struct gpiod_line *line;
> +       gint ret;
> +
> +       chip = gpiod_chip_open(gpiod_test_chip_path(0));
> +       g_assert_nonnull(chip);
> +       gpiod_test_return_if_failed();
> +
> +       line = gpiod_chip_get_line(chip, 7);
> +       g_assert_nonnull(line);
> +       gpiod_test_return_if_failed();
> +
> +       ret = gpiod_line_request_both_edges_events_flags(line,
> +               GPIOD_TEST_CONSUMER, GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       ev_thread = gpiod_test_start_event_thread(0, 7, 100);
> +
> +       ret = gpiod_line_event_wait(line, &ts);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_line_event_read(line, &ev);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_cmpint(ev.event_type, ==, GPIOD_LINE_EVENT_RISING_EDGE);
> +
> +       ret = gpiod_line_event_wait(line, &ts);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_line_event_read(line, &ev);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_cmpint(ev.event_type, ==, GPIOD_LINE_EVENT_FALLING_EDGE);
> +}
> +
> +GPIOD_TEST_CASE(both_edges_bias_pull_down, 0, { 8 })
> +{
> +       g_autoptr(GpiodTestEventThread) ev_thread = NULL;
> +       g_autoptr(gpiod_chip_struct) chip = NULL;
> +       struct timespec ts = { 1, 0 };
> +       struct gpiod_line_event ev;
> +       struct gpiod_line *line;
> +       gint ret;
> +
> +       chip = gpiod_chip_open(gpiod_test_chip_path(0));
> +       g_assert_nonnull(chip);
> +       gpiod_test_return_if_failed();
> +
> +       line = gpiod_chip_get_line(chip, 7);
> +       g_assert_nonnull(line);
> +       gpiod_test_return_if_failed();
> +
> +       ret = gpiod_line_request_both_edges_events_flags(line,
> +               GPIOD_TEST_CONSUMER, GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       ev_thread = gpiod_test_start_event_thread(0, 7, 100);
> +
> +       ret = gpiod_line_event_wait(line, &ts);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_line_event_read(line, &ev);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_cmpint(ev.event_type, ==, GPIOD_LINE_EVENT_RISING_EDGE);
> +
> +       ret = gpiod_line_event_wait(line, &ts);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_line_event_read(line, &ev);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_cmpint(ev.event_type, ==, GPIOD_LINE_EVENT_FALLING_EDGE);
> +}
> +
> +GPIOD_TEST_CASE(both_edges_bias_pull_up, 0, { 8 })
> +{
> +       g_autoptr(GpiodTestEventThread) ev_thread = NULL;
> +       g_autoptr(gpiod_chip_struct) chip = NULL;
> +       struct timespec ts = { 1, 0 };
> +       struct gpiod_line_event ev;
> +       struct gpiod_line *line;
> +       gint ret;
> +
> +       chip = gpiod_chip_open(gpiod_test_chip_path(0));
> +       g_assert_nonnull(chip);
> +       gpiod_test_return_if_failed();
> +
> +       line = gpiod_chip_get_line(chip, 7);
> +       g_assert_nonnull(line);
> +       gpiod_test_return_if_failed();
> +
> +       ret = gpiod_line_request_both_edges_events_flags(line,
> +               GPIOD_TEST_CONSUMER, GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       ev_thread = gpiod_test_start_event_thread(0, 7, 100);
> +
> +       ret = gpiod_line_event_wait(line, &ts);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_line_event_read(line, &ev);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_cmpint(ev.event_type, ==, GPIOD_LINE_EVENT_FALLING_EDGE);
> +
> +       ret = gpiod_line_event_wait(line, &ts);
> +       g_assert_cmpint(ret, ==, 1);
> +
> +       ret = gpiod_line_event_read(line, &ev);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_cmpint(ev.event_type, ==, GPIOD_LINE_EVENT_RISING_EDGE);
> +}
> +
>  GPIOD_TEST_CASE(falling_edge_active_low, 0, { 8 })
>  {
>         g_autoptr(GpiodTestEventThread) ev_thread = NULL;
> diff --git a/tests/tests-line.c b/tests/tests-line.c
> index 205c622..4bf7c02 100644
> --- a/tests/tests-line.c
> +++ b/tests/tests-line.c
> @@ -502,6 +502,7 @@ GPIOD_TEST_CASE(misc_flags, 0, { 8 })
>         g_assert_false(gpiod_line_is_used(line));
>         g_assert_false(gpiod_line_is_open_drain(line));
>         g_assert_false(gpiod_line_is_open_source(line));
> +       g_assert_cmpint(gpiod_line_bias(line), ==, GPIOD_LINE_BIAS_AS_IS);
>
>         config.request_type = GPIOD_LINE_REQUEST_DIRECTION_OUTPUT;
>         config.consumer = GPIOD_TEST_CONSUMER;
> @@ -513,6 +514,7 @@ GPIOD_TEST_CASE(misc_flags, 0, { 8 })
>         g_assert_true(gpiod_line_is_used(line));
>         g_assert_true(gpiod_line_is_open_drain(line));
>         g_assert_false(gpiod_line_is_open_source(line));
> +       g_assert_cmpint(gpiod_line_bias(line), ==, GPIOD_LINE_BIAS_AS_IS);
>         g_assert_cmpint(gpiod_line_direction(line), ==,
>                         GPIOD_LINE_DIRECTION_OUTPUT);
>
> @@ -526,8 +528,11 @@ GPIOD_TEST_CASE(misc_flags, 0, { 8 })
>         g_assert_true(gpiod_line_is_used(line));
>         g_assert_false(gpiod_line_is_open_drain(line));
>         g_assert_true(gpiod_line_is_open_source(line));
> +       g_assert_cmpint(gpiod_line_bias(line), ==, GPIOD_LINE_BIAS_AS_IS);
>         g_assert_cmpint(gpiod_line_direction(line), ==,
>                         GPIOD_LINE_DIRECTION_OUTPUT);
> +
> +       gpiod_line_release(line);
>  }
>
>  GPIOD_TEST_CASE(misc_flags_work_together, 0, { 8 })
> @@ -561,6 +566,7 @@ GPIOD_TEST_CASE(misc_flags_work_together, 0, { 8 })
>         g_assert_true(gpiod_line_is_used(line));
>         g_assert_true(gpiod_line_is_open_drain(line));
>         g_assert_false(gpiod_line_is_open_source(line));
> +       g_assert_cmpint(gpiod_line_bias(line), ==, GPIOD_LINE_BIAS_AS_IS);
>         g_assert_cmpint(gpiod_line_active_state(line), ==,
>                         GPIOD_LINE_ACTIVE_STATE_LOW);
>         g_assert_cmpint(gpiod_line_direction(line), ==,
> @@ -577,8 +583,59 @@ GPIOD_TEST_CASE(misc_flags_work_together, 0, { 8 })
>         g_assert_true(gpiod_line_is_used(line));
>         g_assert_false(gpiod_line_is_open_drain(line));
>         g_assert_true(gpiod_line_is_open_source(line));
> +       g_assert_cmpint(gpiod_line_bias(line), ==, GPIOD_LINE_BIAS_AS_IS);
>         g_assert_cmpint(gpiod_line_active_state(line), ==,
>                         GPIOD_LINE_ACTIVE_STATE_LOW);
> +
> +       gpiod_line_release(line);
> +
> +       /*
> +        * Verify that pull-up/down flags work together
> +        * with active_low.
> +        */
> +
> +       config.request_type = GPIOD_LINE_REQUEST_DIRECTION_INPUT;
> +       config.flags = GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN |
> +                      GPIOD_LINE_REQUEST_FLAG_ACTIVE_LOW;
> +
> +       ret = gpiod_line_request(line, &config, 0);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_true(gpiod_line_is_used(line));
> +       g_assert_false(gpiod_line_is_open_drain(line));
> +       g_assert_false(gpiod_line_is_open_source(line));
> +       g_assert_cmpint(gpiod_line_bias(line), ==, GPIOD_LINE_BIAS_PULL_DOWN);
> +       g_assert_cmpint(gpiod_line_active_state(line), ==,
> +                       GPIOD_LINE_ACTIVE_STATE_LOW);
> +       g_assert_cmpint(gpiod_line_direction(line), ==,
> +                       GPIOD_LINE_DIRECTION_INPUT);
> +
> +       ret = gpiod_line_get_value(line);
> +       g_assert_cmpint(ret, ==, 1);
> +       g_assert_cmpint(errno, ==, 0);
> +
> +       gpiod_line_release(line);
> +
> +       config.flags = GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP |
> +                      GPIOD_LINE_REQUEST_FLAG_ACTIVE_LOW;
> +
> +       ret = gpiod_line_request(line, &config, 0);
> +       g_assert_cmpint(ret, ==, 0);
> +
> +       g_assert_true(gpiod_line_is_used(line));
> +       g_assert_false(gpiod_line_is_open_drain(line));
> +       g_assert_false(gpiod_line_is_open_source(line));
> +       g_assert_cmpint(gpiod_line_bias(line), ==, GPIOD_LINE_BIAS_PULL_UP);
> +       g_assert_cmpint(gpiod_line_active_state(line), ==,
> +                       GPIOD_LINE_ACTIVE_STATE_LOW);
> +       g_assert_cmpint(gpiod_line_direction(line), ==,
> +                       GPIOD_LINE_DIRECTION_INPUT);
> +
> +       ret = gpiod_line_get_value(line);
> +       g_assert_cmpint(ret, ==, 0);
> +       g_assert_cmpint(errno, ==, 0);
> +
> +       gpiod_line_release(line);
>  }
>
>  GPIOD_TEST_CASE(open_source_open_drain_input_mode, 0, { 8 })
> @@ -627,6 +684,47 @@ GPIOD_TEST_CASE(open_source_open_drain_simultaneously, 0, { 8 })
>         g_assert_cmpint(errno, ==, EINVAL);
>  }
>
> +GPIOD_TEST_CASE(multiple_bias_flags, 0, { 8 })
> +{
> +       g_autoptr(gpiod_chip_struct) chip = NULL;
> +       struct gpiod_line *line;
> +       gint ret;
> +
> +       chip = gpiod_chip_open(gpiod_test_chip_path(0));
> +       g_assert_nonnull(chip);
> +       gpiod_test_return_if_failed();
> +
> +       line = gpiod_chip_get_line(chip, 2);
> +       g_assert_nonnull(line);
> +       gpiod_test_return_if_failed();
> +
> +       ret = gpiod_line_request_input_flags(line, GPIOD_TEST_CONSUMER,
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE |
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN);
> +       g_assert_cmpint(ret, ==, -1);
> +       g_assert_cmpint(errno, ==, EINVAL);
> +
> +       ret = gpiod_line_request_input_flags(line, GPIOD_TEST_CONSUMER,
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE |
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP);
> +       g_assert_cmpint(ret, ==, -1);
> +       g_assert_cmpint(errno, ==, EINVAL);
> +
> +       ret = gpiod_line_request_input_flags(line, GPIOD_TEST_CONSUMER,
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN |
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP);
> +       g_assert_cmpint(ret, ==, -1);
> +       g_assert_cmpint(errno, ==, EINVAL);
> +
> +       ret = gpiod_line_request_input_flags(line, GPIOD_TEST_CONSUMER,
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE |
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN |
> +                                       GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP);
> +       g_assert_cmpint(ret, ==, -1);
> +       g_assert_cmpint(errno, ==, EINVAL);
> +}
> +
> +
>  /* Verify that the reference counting of the line fd handle works correctly. */
>  GPIOD_TEST_CASE(release_one_use_another, 0, { 8 })
>  {
> --
> 2.24.0
>

  reply	other threads:[~2019-11-28 10:29 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-25 14:31 [libgpiod][PATCH v3 00/14] Add support for bias flags and SET_CONFIG Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 01/14] core: add support for bias flags Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 02/14] tests: add tests " Kent Gibson
2019-11-28 10:28   ` Bartosz Golaszewski [this message]
2019-11-25 14:31 ` [libgpiod][PATCH v3 03/14] bindings: cxx: add support " Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 04/14] bindings: cxx: tests: add tests " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 05/14] bindings: python: add support " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 06/14] bindings: python: tests: add tests " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 07/14] core: add support for SET_CONFIG Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 08/14] tests: add tests " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 09/14] bindings: cxx: add support " Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 10/14] bindings: cxx: tests: add tests for SET_CONFIG methods Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 11/14] bindings: python: add support for SET_CONFIG Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 12/14] bindings: python: tests: add tests for SET_CONFIG methods Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 13/14] tools: add support for bias flags Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 14/14] tools: add tests for bias and drive flags Kent Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAMpxmJX5Zc5V1vRx8bx-s=q_Dytkb1pU24CxwRqOtK13fff6Cg@mail.gmail.com' \
    --to=bgolaszewski@baylibre.com \
    --cc=linux-gpio@vger.kernel.org \
    --cc=warthog618@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).