[PATCH 2/3] hwmon: (pmbus) add BEL PFE3000 power supply driver

[rentao.bupt@gmail.com]

From: Tao Ren <rentao.bupt@gmail.com>

Add the driver to support BEL PFE3000 which is 3000 Wat AC to DC power
supply. The chip has 8 pages.

Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
 drivers/hwmon/pmbus/bel-pfe.c | 65 ++++++++++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/bel-pfe.c b/drivers/hwmon/pmbus/bel-pfe.c
index 117f9af21bf3..7b6c90b056c9 100644
--- a/drivers/hwmon/pmbus/bel-pfe.c
+++ b/drivers/hwmon/pmbus/bel-pfe.c
@@ -10,9 +10,21 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/pmbus.h>
+
 #include "pmbus.h"
 
-enum chips {pfe1100};
+enum chips {pfe1100, pfe3000};
+
+/*
+ * Disable status check for pfe3000 devices, because some devices report
+ * communication error (invalid command) for VOUT_MODE command (0x20)
+ * although correct VOUT_MODE (0x16) is returned: it leads to incorrect
+ * exponent in linear mode.
+ */
+static struct pmbus_platform_data pfe3000_plat_data = {
+	.flags = PMBUS_SKIP_STATUS_CHECK,
+};
 
 static struct pmbus_driver_info pfe_driver_info[] = {
 	[pfe1100] = {
@@ -34,6 +46,45 @@ static struct pmbus_driver_info pfe_driver_info[] = {
 			   PMBUS_HAVE_STATUS_TEMP |
 			   PMBUS_HAVE_FAN12,
 	},
+
+	[pfe3000] = {
+		.pages = 8,
+		.format[PSC_VOLTAGE_IN] = linear,
+		.format[PSC_VOLTAGE_OUT] = linear,
+		.format[PSC_CURRENT_IN] = linear,
+		.format[PSC_CURRENT_OUT] = linear,
+		.format[PSC_POWER] = linear,
+		.format[PSC_TEMPERATURE] = linear,
+		.format[PSC_FAN] = linear,
+
+		/* Page 0: V1. */
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			   PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			   PMBUS_HAVE_POUT | PMBUS_HAVE_FAN12 |
+			   PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
+			   PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			   PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+			   PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP |
+			   PMBUS_HAVE_VCAP,
+
+		/* Page 1: Vsb. */
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			   PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			   PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			   PMBUS_HAVE_POUT,
+
+		/*
+		 * Page 2: V1 Ishare.
+		 * Page 4: V1 Cathode.
+		 * Page 5: Vsb Cathode.
+		 * Page 6: V1 Sense.
+		 * Page 3 and 7 are reserved.
+		 */
+		.func[2] = PMBUS_HAVE_VOUT,
+		.func[4] = PMBUS_HAVE_VOUT,
+		.func[5] = PMBUS_HAVE_VOUT,
+		.func[6] = PMBUS_HAVE_VOUT,
+	},
 };
 
 static int pfe_pmbus_probe(struct i2c_client *client,
@@ -42,11 +93,23 @@ static int pfe_pmbus_probe(struct i2c_client *client,
 	int model;
 
 	model = (int)id->driver_data;
+
+	/*
+	 * PFE3000-12-069RA devices may not stay in page 0 during device
+	 * probe which leads to probe failure (read status word failed).
+	 * So let's set the device to page 0 at the beginning.
+	 */
+	if (model == pfe3000) {
+		client->dev.platform_data = &pfe3000_plat_data;
+		i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	}
+
 	return pmbus_do_probe(client, id, &pfe_driver_info[model]);
 }
 
 static const struct i2c_device_id pfe_device_id[] = {
 	{"pfe1100", pfe1100},
+	{"pfe3000", pfe3000},
 	{}
 };
 
-- 
2.17.1