From: Vadim Pasternak <vadimp@mellanox.com>
To: linux@roeck-us.net, robh+dt@kernel.org, vijaykhemka@fb.com
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
Vadim Pasternak <vadimp@mellanox.com>
Subject: [PATCH hwmon-next v1 3/6] hwmon: (pmbus/tps53679) Extend device list supported by driver
Date: Mon, 13 Jan 2020 15:08:38 +0000 [thread overview]
Message-ID: <20200113150841.17670-4-vadimp@mellanox.com> (raw)
In-Reply-To: <20200113150841.17670-1-vadimp@mellanox.com>
Extends driver with support of the additional devices:
Texas Instruments Dual channel DCAP+ multiphase controllers: TPS53688.
Extend Kconfig with added device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
drivers/hwmon/pmbus/Kconfig | 4 ++--
drivers/hwmon/pmbus/tps53679.c | 2 ++
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 59859979571d..0dd30b07bf18 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -200,10 +200,10 @@ config SENSORS_TPS40422
be called tps40422.
config SENSORS_TPS53679
- tristate "TI TPS53679"
+ tristate "TI TPS53679, TPS53688"
help
If you say yes here you get hardware monitoring support for TI
- TPS53679.
+ TPS53679, TPS53688
This driver can also be built as a module. If so, the module will
be called tps53679.
diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c
index 163e8c6aaa8e..9c22e9013dd7 100644
--- a/drivers/hwmon/pmbus/tps53679.c
+++ b/drivers/hwmon/pmbus/tps53679.c
@@ -85,6 +85,7 @@ static int tps53679_probe(struct i2c_client *client,
static const struct i2c_device_id tps53679_id[] = {
{"tps53679", 0},
+ {"tps53688", 0},
{}
};
@@ -92,6 +93,7 @@ MODULE_DEVICE_TABLE(i2c, tps53679_id);
static const struct of_device_id __maybe_unused tps53679_of_match[] = {
{.compatible = "ti,tps53679"},
+ {.compatible = "ti,tps53688"},
{}
};
MODULE_DEVICE_TABLE(of, tps53679_of_match);
--
2.11.0
next prev parent reply other threads:[~2020-01-13 15:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-13 15:08 [PATCH hwmon-next v1 0/6] hwmon: (pmbus) Add support for vid mode calculation per page bases Vadim Pasternak
2020-01-13 15:08 ` [PATCH hwmon-next v1 1/6] hwmon: (pmbus/core) Add support for vid mode detection " Vadim Pasternak
2020-01-14 14:06 ` Guenter Roeck
2020-01-13 15:08 ` [PATCH hwmon-next v1 2/6] hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes Vadim Pasternak
2020-01-14 14:06 ` Guenter Roeck
2020-01-13 15:08 ` Vadim Pasternak [this message]
2020-01-14 14:07 ` [PATCH hwmon-next v1 3/6] hwmon: (pmbus/tps53679) Extend device list supported by driver Guenter Roeck
2020-01-13 15:08 ` [PATCH hwmon-next v1 4/6] hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers Vadim Pasternak
2020-01-14 14:08 ` Guenter Roeck
2020-01-13 15:08 ` [PATCH hwmon-next v1 5/6] dt-bindings: Add TI and Infineon VR Controllers as trivial devices Vadim Pasternak
2020-01-14 14:04 ` Guenter Roeck
2020-01-15 16:05 ` Rob Herring
2020-01-13 15:08 ` [PATCH hwmon-next v1 6/6] docs: hwmon: Include 'xdpe12284.rst' into docs Vadim Pasternak
2020-01-14 14:08 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200113150841.17670-4-vadimp@mellanox.com \
--to=vadimp@mellanox.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=vijaykhemka@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).