linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Michele Sorcinelli <michelesr@autistici.org>
Cc: "Pali Rohár" <pali.rohar@gmail.com>,
	"Jean Delvare" <jdelvare@suse.com>,
	linux-hwmon@vger.kernel.org
Subject: Re: [PATCH v3.1] dell-smm-hwmon.c: Additional temperature sensors
Date: Sun, 23 Dec 2018 17:16:21 -0800	[thread overview]
Message-ID: <f0cd09fe-55d3-9f33-30b7-a6edbee3631e@roeck-us.net> (raw)
In-Reply-To: <e5ed861b-d341-b5ce-fd04-bbc16d6ff1ac@autistici.org>

On 12/23/18 2:59 PM, Michele Sorcinelli wrote:
> I've just realized that is unusual to add a minor version for patches.
> 

Please don't top-post.

It is also unusual to send a new version of a patch as response to
a previous one. Not that it mattered here, but this can easily result
in a lost patch. It is also desirable to version the changelog itself,
ie describe which change was made in each version of the patch.

> I thought that it could make sense to highlight that this is a minor
> change, in fact I've just removed the executable bit that was wrongly
> added in the previous patches.
> 
> Please let me know if it's a problem and want me to change the version
> number to v4.
> 

The problem is not as much the patch version number, but other changes
made in the driver. Specifically, the driver was converted to use the new
SENSOR_DEVICE_ATTR_{RW,RO} macros.

Please rebase your patch to linux-next (or wait until the next -rc1 is
released and rebase on top of -rc1) and resend. When doing so, please use
the new macros. This should also address its checkpatch issues.

Thanks,
Guenter

> On 12/22/18 2:18 PM, Michele Sorcinelli wrote:
>> The code has been extended to support up to 10 temperature sensors.
>>
>> Changes from previous patch versions:
>>
>> - fix wrong index ranges in i8k_is_visible() if conditions
>> - restore i8k_get_temp_type() as probe method for temp sensors because
>>    i8k_get_temp() is not reliable (for example it won't work when
>>    sensors are turned off)
>> - remove wrong executable bit in dell-smm-hwmon.c
>>
>> Signed-off-by: Michele Sorcinelli <michelesr@autistici.org>
>> Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
>> ---
>>   drivers/hwmon/dell-smm-hwmon.c | 105 ++++++++++++++++++++++++++++-----
>>   1 file changed, 90 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
>> index 367a8a617..73a30e3e4 100644
>> --- a/drivers/hwmon/dell-smm-hwmon.c
>> +++ b/drivers/hwmon/dell-smm-hwmon.c
>> @@ -82,9 +82,16 @@ static bool disallow_fan_support;
>>   #define I8K_HWMON_HAVE_TEMP2    (1 << 1)
>>   #define I8K_HWMON_HAVE_TEMP3    (1 << 2)
>>   #define I8K_HWMON_HAVE_TEMP4    (1 << 3)
>> -#define I8K_HWMON_HAVE_FAN1    (1 << 4)
>> -#define I8K_HWMON_HAVE_FAN2    (1 << 5)
>> -#define I8K_HWMON_HAVE_FAN3    (1 << 6)
>> +#define I8K_HWMON_HAVE_TEMP5    (1 << 4)
>> +#define I8K_HWMON_HAVE_TEMP6    (1 << 5)
>> +#define I8K_HWMON_HAVE_TEMP7    (1 << 6)
>> +#define I8K_HWMON_HAVE_TEMP8    (1 << 7)
>> +#define I8K_HWMON_HAVE_TEMP9    (1 << 8)
>> +#define I8K_HWMON_HAVE_TEMP10    (1 << 9)
>> +
>> +#define I8K_HWMON_HAVE_FAN1    (1 << 10)
>> +#define I8K_HWMON_HAVE_FAN2    (1 << 11)
>> +#define I8K_HWMON_HAVE_FAN3    (1 << 12)
>>
>>   MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
>>   MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
>> @@ -743,6 +750,25 @@ static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>>   static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 3);
>>   static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>>                 3);
>> +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 4);
>> +static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>> +              4);
>> +static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 5);
>> +static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>> +              5);
>> +static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 6);
>> +static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>> +              6);
>> +static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 7);
>> +static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>> +              7);
>> +static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 8);
>> +static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>> +              8);
>> +static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 9);
>> +static SENSOR_DEVICE_ATTR(temp10_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
>> +              9);
>> +
>>   static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, i8k_hwmon_show_fan, NULL, 0);
>>   static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, i8k_hwmon_show_fan_label, NULL,
>>                 0);
>> @@ -770,15 +796,27 @@ static struct attribute *i8k_attrs[] = {
>>       &sensor_dev_attr_temp3_label.dev_attr.attr,    /* 5 */
>>       &sensor_dev_attr_temp4_input.dev_attr.attr,    /* 6 */
>>       &sensor_dev_attr_temp4_label.dev_attr.attr,    /* 7 */
>> -    &sensor_dev_attr_fan1_input.dev_attr.attr,    /* 8 */
>> -    &sensor_dev_attr_fan1_label.dev_attr.attr,    /* 9 */
>> -    &sensor_dev_attr_pwm1.dev_attr.attr,        /* 10 */
>> -    &sensor_dev_attr_fan2_input.dev_attr.attr,    /* 11 */
>> -    &sensor_dev_attr_fan2_label.dev_attr.attr,    /* 12 */
>> -    &sensor_dev_attr_pwm2.dev_attr.attr,        /* 13 */
>> -    &sensor_dev_attr_fan3_input.dev_attr.attr,    /* 14 */
>> -    &sensor_dev_attr_fan3_label.dev_attr.attr,    /* 15 */
>> -    &sensor_dev_attr_pwm3.dev_attr.attr,        /* 16 */
>> +    &sensor_dev_attr_temp5_input.dev_attr.attr,    /* 8 */
>> +    &sensor_dev_attr_temp5_label.dev_attr.attr,    /* 9 */
>> +    &sensor_dev_attr_temp6_input.dev_attr.attr,    /* 10 */
>> +    &sensor_dev_attr_temp6_label.dev_attr.attr,    /* 11 */
>> +    &sensor_dev_attr_temp7_input.dev_attr.attr,    /* 12 */
>> +    &sensor_dev_attr_temp7_label.dev_attr.attr,    /* 13 */
>> +    &sensor_dev_attr_temp8_input.dev_attr.attr,    /* 14 */
>> +    &sensor_dev_attr_temp8_label.dev_attr.attr,    /* 15 */
>> +    &sensor_dev_attr_temp9_input.dev_attr.attr,    /* 16 */
>> +    &sensor_dev_attr_temp9_label.dev_attr.attr,    /* 17 */
>> +    &sensor_dev_attr_temp10_input.dev_attr.attr,    /* 18 */
>> +    &sensor_dev_attr_temp10_label.dev_attr.attr,    /* 19 */
>> +    &sensor_dev_attr_fan1_input.dev_attr.attr,    /* 20 */
>> +    &sensor_dev_attr_fan1_label.dev_attr.attr,    /* 21 */
>> +    &sensor_dev_attr_pwm1.dev_attr.attr,        /* 22 */
>> +    &sensor_dev_attr_fan2_input.dev_attr.attr,    /* 23 */
>> +    &sensor_dev_attr_fan2_label.dev_attr.attr,    /* 24 */
>> +    &sensor_dev_attr_pwm2.dev_attr.attr,        /* 25 */
>> +    &sensor_dev_attr_fan3_input.dev_attr.attr,    /* 26 */
>> +    &sensor_dev_attr_fan3_label.dev_attr.attr,    /* 27 */
>> +    &sensor_dev_attr_pwm3.dev_attr.attr,        /* 28 */
>>       NULL
>>   };
>>
>> @@ -802,13 +840,32 @@ static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
>>       if (index >= 6 && index <= 7 &&
>>           !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP4))
>>           return 0;
>> -    if (index >= 8 && index <= 10 &&
>> +    if (index >= 8 && index <= 9 &&
>> +        !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP5))
>> +        return 0;
>> +    if (index >= 10 && index <= 11 &&
>> +        !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP6))
>> +        return 0;
>> +    if (index >= 12 && index <= 13 &&
>> +        !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP7))
>> +        return 0;
>> +    if (index >= 14 && index <= 15 &&
>> +        !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP8))
>> +        return 0;
>> +    if (index >= 16 && index <= 17 &&
>> +        !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP9))
>> +        return 0;
>> +    if (index >= 18 && index <= 19 &&
>> +        !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP10))
>> +        return 0;
>> +
>> +    if (index >= 20 && index <= 22 &&
>>           !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN1))
>>           return 0;
>> -    if (index >= 11 && index <= 13 &&
>> +    if (index >= 23 && index <= 25 &&
>>           !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN2))
>>           return 0;
>> -    if (index >= 14 && index <= 16 &&
>> +    if (index >= 26 && index <= 28 &&
>>           !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN3))
>>           return 0;
>>
>> @@ -841,6 +898,24 @@ static int __init i8k_init_hwmon(void)
>>       err = i8k_get_temp_type(3);
>>       if (err >= 0)
>>           i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP4;
>> +    err = i8k_get_temp_type(4);
>> +    if (err >= 0)
>> +        i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP5;
>> +    err = i8k_get_temp_type(5);
>> +    if (err >= 0)
>> +        i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP6;
>> +    err = i8k_get_temp_type(6);
>> +    if (err >= 0)
>> +        i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP7;
>> +    err = i8k_get_temp_type(7);
>> +    if (err >= 0)
>> +        i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP8;
>> +    err = i8k_get_temp_type(8);
>> +    if (err >= 0)
>> +        i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP9;
>> +    err = i8k_get_temp_type(9);
>> +    if (err >= 0)
>> +        i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP10;
>>
>>       /* First fan attributes, if fan status or type is OK */
>>       err = i8k_get_fan_status(0);
>> -- 
>> 2.20.1
>>
> 

      reply	other threads:[~2018-12-24  1:16 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-27 23:06 [PATCH] dell-smm-hwmon.c: Add XPS 9570 to supported devices list Michele Sorcinelli
2018-11-28  8:14 ` Pali Rohár
2018-11-28 12:30 ` Michele Sorcinelli
2018-11-28 12:56   ` Pali Rohár
2018-11-28 13:01     ` Michele Sorcinelli
2018-11-28 23:23       ` Michele Sorcinelli
2018-11-29  9:48         ` Pali Rohár
2018-11-29 21:42           ` Michele Sorcinelli
2018-12-05  9:15             ` Pali Rohár
2018-12-07 20:29               ` [PATCH] dell-smm-hwmon.c: Add support for additional temperature sensors Michele Sorcinelli
2018-12-08  0:52                 ` Michele Sorcinelli
2018-12-08  0:56                 ` [PATCH] dell-smm-hwmon.c: Additional " Michele Sorcinelli
2018-12-08  4:24                   ` Guenter Roeck
2018-12-08 15:34                     ` Michele Sorcinelli
2018-12-08 15:43                       ` Michele Sorcinelli
2018-12-08 16:52                       ` Guenter Roeck
2018-12-10 10:58                     ` Pali Rohár
2018-12-10 11:53                       ` Michele Sorcinelli
2018-12-10 12:03                         ` Pali Rohár
2019-02-07 12:16                       ` Michele Sorcinelli
2019-02-07 12:40                         ` Pali Rohár
2019-04-21 17:00                           ` Michele Sorcinelli
2019-06-14 21:38                           ` Michele Sorcinelli
2018-12-08 17:02               ` [PATCH v2] " Michele Sorcinelli
2018-12-14 23:57               ` [PATCH v3] " Michele Sorcinelli
2018-12-21 23:40                 ` Guenter Roeck
2018-12-22 12:50                   ` Pali Rohár
2018-12-22 14:18                     ` [PATCH v3.1] " Michele Sorcinelli
2018-12-23 22:59                       ` Michele Sorcinelli
2018-12-24  1:16                         ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f0cd09fe-55d3-9f33-30b7-a6edbee3631e@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=michelesr@autistici.org \
    --cc=pali.rohar@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).