From: Michael Kelley <mikelley@microsoft.com>
To: will@kernel.org, catalin.marinas@arm.com, mark.rutland@arm.com,
lorenzo.pieralisi@arm.com, sudeep.holla@arm.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-hyperv@vger.kernel.org,
linux-efi@vger.kernel.org, arnd@arndb.de, wei.liu@kernel.org,
ardb@kernel.org, daniel.lezcano@linaro.org, kys@microsoft.com
Cc: mikelley@microsoft.com
Subject: [PATCH v9 5/7] arm64: hyperv: Initialize hypervisor on boot
Date: Mon, 8 Mar 2021 11:57:17 -0800 [thread overview]
Message-ID: <1615233439-23346-6-git-send-email-mikelley@microsoft.com> (raw)
In-Reply-To: <1615233439-23346-1-git-send-email-mikelley@microsoft.com>
Add ARM64-specific code to initialize the Hyper-V
hypervisor when booting as a guest VM. Provide functions
and data structures indicating hypervisor status that
are needed by VMbus driver.
This code is built only when CONFIG_HYPERV is enabled.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
---
arch/arm64/hyperv/mshyperv.c | 119 ++++++++++++++++++++++++++++++++++++++
arch/arm64/include/asm/mshyperv.h | 6 ++
arch/arm64/kernel/setup.c | 4 ++
3 files changed, 129 insertions(+)
diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c
index d202b4c..125e83e 100644
--- a/arch/arm64/hyperv/mshyperv.c
+++ b/arch/arm64/hyperv/mshyperv.c
@@ -14,6 +14,125 @@
#include <linux/types.h>
#include <linux/export.h>
#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/version.h>
+#include <linux/cpuhotplug.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+#include <asm/mshyperv.h>
+
+static bool hyperv_initialized;
+struct ms_hyperv_info ms_hyperv __ro_after_init;
+EXPORT_SYMBOL_GPL(ms_hyperv);
+
+u32 *hv_vp_index;
+EXPORT_SYMBOL_GPL(hv_vp_index);
+
+u32 hv_max_vp_index;
+EXPORT_SYMBOL_GPL(hv_max_vp_index);
+
+static int hv_cpu_init(unsigned int cpu)
+{
+ hv_vp_index[cpu] = hv_get_vpreg(HV_REGISTER_VP_INDEX);
+ return 0;
+}
+
+void __init hyperv_early_init(void)
+{
+ struct hv_get_vp_registers_output result;
+ u32 a, b, c, d;
+ u64 guest_id;
+
+ /*
+ * If we're in a VM on Hyper-V, the ACPI hypervisor_id field will
+ * have the string "MsHyperV".
+ */
+ if (strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8))
+ return;
+
+ /* Setup the guest ID */
+ guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0);
+ hv_set_vpreg(HV_REGISTER_GUEST_OSID, guest_id);
+
+ /* Get the features and hints from Hyper-V */
+ hv_get_vpreg_128(HV_REGISTER_FEATURES, &result);
+ ms_hyperv.features = result.as32.a;
+ ms_hyperv.misc_features = result.as32.c;
+
+ hv_get_vpreg_128(HV_REGISTER_ENLIGHTENMENTS, &result);
+ ms_hyperv.hints = result.as32.a;
+
+ pr_info("Hyper-V: Features 0x%x, hints 0x%x, misc 0x%x\n",
+ ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
+
+ /*
+ * If Hyper-V has crash notifications, set crash_kexec_post_notifiers
+ * so that we will report the panic to Hyper-V before running kdump.
+ */
+ if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE)
+ crash_kexec_post_notifiers = true;
+
+ /* Get information about the Hyper-V host version */
+ hv_get_vpreg_128(HV_REGISTER_HYPERVISOR_VERSION, &result);
+ a = result.as32.a;
+ b = result.as32.b;
+ c = result.as32.c;
+ d = result.as32.d;
+ pr_info("Hyper-V: Host Build %d.%d.%d.%d-%d-%d\n",
+ b >> 16, b & 0xFFFF, a, d & 0xFFFFFF, c, d >> 24);
+
+ hyperv_initialized = true;
+}
+
+static int __init hyperv_init(void)
+{
+ int i;
+
+ /* Allocate and initialize percpu VP index array */
+ hv_max_vp_index = num_possible_cpus();
+ hv_vp_index = kmalloc_array(hv_max_vp_index, sizeof(*hv_vp_index),
+ GFP_KERNEL);
+ if (!hv_vp_index) {
+ hv_max_vp_index = 0;
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < hv_max_vp_index; i++)
+ hv_vp_index[i] = VP_INVAL;
+
+ if (cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "arm64/hyperv_init:online",
+ hv_cpu_init, NULL) < 0) {
+ hv_max_vp_index = 0;
+ kfree(hv_vp_index);
+ hv_vp_index = NULL;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+early_initcall(hyperv_init);
+
+/* This routine is called before kexec/kdump. It does required cleanup. */
+void hyperv_cleanup(void)
+{
+ hv_set_vpreg(HV_REGISTER_GUEST_OSID, 0);
+
+}
+EXPORT_SYMBOL_GPL(hyperv_cleanup);
+
+bool hv_is_hyperv_initialized(void)
+{
+ return hyperv_initialized;
+}
+EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized);
+
+bool hv_is_hibernation_supported(void)
+{
+ return false;
+}
+EXPORT_SYMBOL_GPL(hv_is_hibernation_supported);
/*
* The VMbus handler functions are no-ops on ARM64 because
diff --git a/arch/arm64/include/asm/mshyperv.h b/arch/arm64/include/asm/mshyperv.h
index b17299c..86ca5c5 100644
--- a/arch/arm64/include/asm/mshyperv.h
+++ b/arch/arm64/include/asm/mshyperv.h
@@ -23,6 +23,12 @@
#include <asm/hyperv-tlfs.h>
#include <clocksource/arm_arch_timer.h>
+#if IS_ENABLED(CONFIG_HYPERV)
+void __init hyperv_early_init(void);
+#else
+static inline void hyperv_early_init(void) {};
+#endif
+
/*
* Declare calls to get and set Hyper-V VP register values on ARM64, which
* requires a hypercall.
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index c18aacd..1df8285 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -49,6 +49,7 @@
#include <asm/traps.h>
#include <asm/efi.h>
#include <asm/xen/hypervisor.h>
+#include <asm/mshyperv.h>
#include <asm/mmu_context.h>
static int num_standard_resources;
@@ -340,6 +341,9 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p)
if (acpi_disabled)
unflatten_device_tree();
+ /* Do after acpi_boot_table_init() so local FADT is available */
+ hyperv_early_init();
+
bootmem_init();
kasan_init();
--
1.8.3.1
next prev parent reply other threads:[~2021-03-08 19:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-08 19:57 [PATCH v9 0/7] Enable Linux guests on Hyper-V on ARM64 Michael Kelley
2021-03-08 19:57 ` [PATCH v9 1/7] smccc: Add HVC call variant with result registers other than 0 thru 3 Michael Kelley
2021-03-24 16:55 ` Mark Rutland
2021-03-25 4:55 ` Michael Kelley
2021-03-25 9:56 ` Mark Rutland
2021-03-25 17:19 ` Michael Kelley
2021-03-08 19:57 ` [PATCH v9 2/7] arm64: hyperv: Add Hyper-V hypercall and register access utilities Michael Kelley
2021-03-15 23:02 ` Sunil Muthuswamy
2021-03-08 19:57 ` [PATCH v9 3/7] arm64: hyperv: Add Hyper-V clocksource/clockevent support Michael Kelley
2021-03-08 19:57 ` [PATCH v9 4/7] arm64: hyperv: Add kexec and panic handlers Michael Kelley
2021-03-08 19:57 ` Michael Kelley [this message]
2021-03-15 19:54 ` [PATCH v9 5/7] arm64: hyperv: Initialize hypervisor on boot Sunil Muthuswamy
2021-03-08 19:57 ` [PATCH v9 6/7] arm64: efi: Export screen_info Michael Kelley
2021-03-08 19:57 ` [PATCH v9 7/7] Drivers: hv: Enable Hyper-V code to be built on ARM64 Michael Kelley
2021-03-24 15:54 ` [PATCH v9 0/7] Enable Linux guests on Hyper-V " Michael Kelley
2021-04-05 17:45 ` Michael Kelley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1615233439-23346-6-git-send-email-mikelley@microsoft.com \
--to=mikelley@microsoft.com \
--cc=ardb@kernel.org \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=daniel.lezcano@linaro.org \
--cc=kys@microsoft.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=sudeep.holla@arm.com \
--cc=wei.liu@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).