linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tali Perry <tali.perry1@gmail.com>
To: ofery@google.com, brendanhiggins@google.com,
	avifishman70@gmail.com, tmaimon77@gmail.com, kfting@nuvoton.com,
	venture@google.com, yuenn@google.com, benjaminfair@google.com,
	robh+dt@kernel.org, wsa@the-dreams.de,
	andriy.shevchenko@linux.intel.com
Cc: linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
	openbmc@lists.ozlabs.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Tali Perry <tali.perry1@gmail.com>
Subject: [PATCH v13 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller
Date: Fri, 22 May 2020 14:33:10 +0300	[thread overview]
Message-ID: <20200522113312.181413-2-tali.perry1@gmail.com> (raw)
In-Reply-To: <20200522113312.181413-1-tali.perry1@gmail.com>

Added device tree binding documentation for Nuvoton BMC
NPCM I2C controller.

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
---
 .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 000000000000..1c9d9a2d4bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+
+description: |
+  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
+  both master and slave mode. Each controller can switch between master and slave
+  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
+  RX.
+
+maintainers:
+  - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm7xx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Reference clock for the I2C bus
+
+  bus-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 possible values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@80000 {
+        compatible = "nuvoton,npcm750-i2c";
+        reg = <0x80000 0x1000>;
+        clocks = <&clk NPCM7XX_CLK_APB2>;
+        bus-frequency = <100000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
-- 
2.22.0


  reply	other threads:[~2020-05-22 11:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22 11:33 [PATCH v13 0/3] i2c: npcm7xx: add NPCM i2c controller driver Tali Perry
2020-05-22 11:33 ` Tali Perry [this message]
2020-05-22 22:42   ` [PATCH v13 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller Rob Herring
2020-05-22 22:47     ` Rob Herring
2020-05-24  8:35       ` Tali Perry
2020-05-22 11:33 ` [PATCH v13 2/3] i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver Tali Perry
2020-05-22 12:27   ` Andy Shevchenko
2020-05-24 12:20   ` kbuild test robot
2020-05-22 11:33 ` [PATCH v13 3/3] i2c: npcm7xx: Add support for slave mode for Nuvoton Tali Perry
2020-05-22 12:32   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200522113312.181413-2-tali.perry1@gmail.com \
    --to=tali.perry1@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=avifishman70@gmail.com \
    --cc=benjaminfair@google.com \
    --cc=brendanhiggins@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kfting@nuvoton.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ofery@google.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=tmaimon77@gmail.com \
    --cc=venture@google.com \
    --cc=wsa@the-dreams.de \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).