linux-i3c.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@collabora.com>
To: Vitor Soares <Vitor.Soares@synopsys.com>
Cc: Joao.Pinto@synopsys.com, rafael@kernel.org,
	linux-iio@vger.kernel.org, gregkh@linuxfoundation.org,
	bbrezillon@kernel.org, linux-kernel@vger.kernel.org,
	linux-i3c@lists.infradead.org, lorenzo@kernel.org
Subject: Re: [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
Date: Fri, 19 Jul 2019 14:51:10 +0200	[thread overview]
Message-ID: <20190719145110.6fcb0f4c@pc-375.home> (raw)
In-Reply-To: <2a181b502eb69f8506873e2ff93239cbb4108e98.1563533343.git.vitor.soares@synopsys.com>

On Fri, 19 Jul 2019 13:19:05 +0200
Vitor Soares <Vitor.Soares@synopsys.com> wrote:

> For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> spi and i2c mode.
> 
> The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
> them.
> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

> ---
> Changes in v5:
>   Move regmap_config declaration inside st_lsm6dsx_i3c_probe()
>   Fix warning [-Wint-to-void-pointer-cast] when compiling in 64-bit arch
> 
> Changes in v4:
>   Remove hw_id variable
> 
> Changes in v3:
>   Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
>   Use st_lsm6dsx_probe new form
> 
> Changes in v2:
>   Add support for LSM6DSR
>   Set pm_ops to st_lsm6dsx_pm_ops
> 
>  drivers/iio/imu/st_lsm6dsx/Kconfig          |  8 +++-
>  drivers/iio/imu/st_lsm6dsx/Makefile         |  1 +
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++++++++++++++++++++++++++++
>  3 files changed, 65 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> index 9e59297..6b5a73c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> @@ -1,11 +1,12 @@
>  
>  config IIO_ST_LSM6DSX
>  	tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
> -	depends on (I2C || SPI)
> +	depends on (I2C || SPI || I3C)
>  	select IIO_BUFFER
>  	select IIO_KFIFO_BUF
>  	select IIO_ST_LSM6DSX_I2C if (I2C)
>  	select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
> +	select IIO_ST_LSM6DSX_I3C if (I3C)
>  	help
>  	  Say yes here to build support for STMicroelectronics LSM6DSx imu
>  	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
>  	tristate
>  	depends on IIO_ST_LSM6DSX
>  	select REGMAP_SPI
> +
> +config IIO_ST_LSM6DSX_I3C
> +	tristate
> +	depends on IIO_ST_LSM6DSX
> +	select REGMAP_I3C
> diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
> index e5f733c..c676965 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Makefile
> +++ b/drivers/iio/imu/st_lsm6dsx/Makefile
> @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
>  obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
>  obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
>  obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
> +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> new file mode 100644
> index 0000000..57e6331
> --- /dev/null
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> + *
> + * Author: Vitor Soares <vitor.soares@synopsys.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include "st_lsm6dsx.h"
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> +	I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> +	I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> +
> +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> +{
> +	struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> +		.reg_bits = 8,
> +		.val_bits = 8,
> +	};
> +	const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> +							    st_lsm6dsx_i3c_ids);
> +	struct regmap *regmap;
> +
> +	regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> +			(int)PTR_ERR(regmap));
> +		return PTR_ERR(regmap);
> +	}
> +
> +	return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
> +}
> +
> +static struct i3c_driver st_lsm6dsx_driver = {
> +	.driver = {
> +		.name = "st_lsm6dsx_i3c",
> +		.pm = &st_lsm6dsx_pm_ops,
> +	},
> +	.probe = st_lsm6dsx_i3c_probe,
> +	.id_table = st_lsm6dsx_i3c_ids,
> +};
> +module_i3c_driver(st_lsm6dsx_driver);
> +
> +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
> +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> +MODULE_LICENSE("GPL v2");


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  reply	other threads:[~2019-07-19 12:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-19 11:19 [PATCH v5 0/2] Add ST lsm6dso i3c support Vitor Soares
2019-07-19 11:19 ` [PATCH v5 1/2] i3c: move i3c_device_match_id to device.c and export it Vitor Soares
2019-07-19 12:49   ` Boris Brezillon
2019-07-19 11:19 ` [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR Vitor Soares
2019-07-19 12:51   ` Boris Brezillon [this message]
2019-07-19 13:31     ` Vitor Soares

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190719145110.6fcb0f4c@pc-375.home \
    --to=boris.brezillon@collabora.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=Vitor.Soares@synopsys.com \
    --cc=bbrezillon@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=rafael@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).