From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Michael Schmitz <schmitzmic@gmail.com>
Cc: "Linux/m68k" <linux-m68k@vger.kernel.org>,
linux-ide@vger.kernel.org, Finn Thain <fthain@linux-m68k.org>,
ALeX Kazik <alex@kazik.de>
Subject: Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
Date: Mon, 7 Jun 2021 10:01:47 +0200 [thread overview]
Message-ID: <CAMuHMdUH1LJrrU2VKbtgYvvSVgKk-=1yOW9kWot3EKk=kADZcA@mail.gmail.com> (raw)
In-Reply-To: <1622958877-2026-2-git-send-email-schmitzmic@gmail.com>
Hi Michael,
On Sun, Jun 6, 2021 at 7:54 AM Michael Schmitz <schmitzmic@gmail.com> wrote:
> Add code to support 10 Mbit and 100 Mbit mode for APNE driver.
>
> A new ISA type ISA_TYPE_AG100 switches the Amiga ISA inb accessor
> to word access as required by the 100 Mbit cards.
missing "dynamically".
>
> Patch modified after patch "[PATCH RFC net-next] Amiga PCMCIA
> 100 MBit card support" submitted to netdev 2018/09/16 by Alex
> Kazik <alex@kazik.de>.
>
> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Thanks for your patch!
> --- a/arch/m68k/include/asm/io_mm.h
> +++ b/arch/m68k/include/asm/io_mm.h
> @@ -101,6 +101,11 @@
> #define ISA_TYPE_Q40 (1)
> #define ISA_TYPE_AG (2)
> #define ISA_TYPE_ENEC (3)
> +#define ISA_TYPE_AG100 (4) /* for 100 MBit APNE card */
As this type may be needed for other cards, perhaps it should be
named after what it really does, i.e. always using 16-bit accesses?
ISA_TYPE_AG16?
> +
> +#if defined(CONFIG_APNE100MBIT)
#ifdef
> +#define MULTI_ISA 1
> +#endif
>
> #if defined(CONFIG_Q40) && !defined(MULTI_ISA)
> #define ISA_TYPE ISA_TYPE_Q40
> @@ -135,6 +140,9 @@ static inline u8 __iomem *isa_itb(unsigned long addr)
> #ifdef CONFIG_Q40
> case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
> #endif
> +#if defined(CONFIG_APNE100MBIT)
#ifdef
> + case ISA_TYPE_AG100: fallthrough;
Fallthrough to what? Oh, to ISA_TYPE_AG.
Please make this clear, and safer, by moving this inside the #ifdef
below (CONFIG_APNE100MBIT depends on CONFIG_AMIGA_PCMCIA).
> +#endif
> #ifdef CONFIG_AMIGA_PCMCIA
> case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
> #endif
> @@ -212,13 +232,16 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
> }
>
>
> -#define isa_inb(port) in_8(isa_itb(port))
Why move it below? Because its comment does not apply to the below?
> #define isa_inw(port) (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port)))
> #define isa_inl(port) (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port)))
> #define isa_outb(val,port) out_8(isa_itb(port),(val))
> #define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
> #define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
>
> +/* for APNE 100 Mbit cards - hope the APNE 100 case will be eliminated as
> + * dead code if MULTI_ISA is not set */
I don't think this comment is needed.
> +#define isa_inb(port) ((ISA_TYPE == ISA_TYPE_AG100) ? ((port) & 1 ? isa_inw((port) - 1) & 0xff : isa_inw(port) >> 8) : in_8(isa_itb(port))
> +
> #define isa_readb(p) in_8(isa_mtb((unsigned long)(p)))
> #define isa_readw(p) \
> (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2021-06-07 8:02 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAMuHMdUskb3oicq8Kbf6MY_4mn4-Y1pJ-om4fny7k48gndscgg@mail.gmail.com>
2021-06-02 5:21 ` [PATCH RFC 0/2] Fix m68k multiplatform ISA support Michael Schmitz
2021-06-02 5:21 ` [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari Michael Schmitz
2021-06-03 8:23 ` Finn Thain
2021-06-04 0:19 ` Michael Schmitz
2021-06-04 5:55 ` Finn Thain
2021-06-04 7:30 ` Michael Schmitz
2021-06-04 22:49 ` Brad Boyer
2021-06-05 1:41 ` Michael Schmitz
2021-06-05 6:04 ` Brad Boyer
2021-06-05 22:05 ` Michael Schmitz
2021-06-06 2:18 ` Michael Schmitz
2021-06-06 4:53 ` Finn Thain
2021-06-06 5:42 ` Michael Schmitz
2021-06-06 23:51 ` Brad Boyer
2021-06-06 5:54 ` [PATCH RFC 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-06 5:54 ` [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-07 8:01 ` Geert Uytterhoeven [this message]
2021-06-07 8:20 ` Michael Schmitz
2021-06-07 11:15 ` Geert Uytterhoeven
2021-06-07 19:57 ` Michael Schmitz
2021-06-08 6:42 ` Geert Uytterhoeven
2021-06-08 21:55 ` Michael Schmitz
2021-06-09 6:33 ` Geert Uytterhoeven
2021-06-08 21:56 ` Michael Schmitz
2021-06-06 5:54 ` [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-07 8:08 ` Geert Uytterhoeven
2021-06-07 8:40 ` Michael Schmitz
2021-06-07 8:46 ` ALeX Kazik
2021-06-08 3:10 ` Michael Schmitz
2021-06-07 8:37 ` Geert Uytterhoeven
2021-06-07 12:56 ` Geert Uytterhoeven
2021-06-09 7:36 ` [PATCH v1 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-09 7:36 ` [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-09 8:04 ` Andreas Schwab
2021-06-09 21:54 ` Michael Schmitz
2021-06-10 1:09 ` Finn Thain
2021-06-10 7:32 ` Geert Uytterhoeven
2021-06-11 2:15 ` Michael Schmitz
2021-06-10 8:53 ` Andreas Schwab
2021-06-09 7:36 ` [PATCH v1 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-16 21:11 ` [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support ALeX Kazik
2021-06-17 1:10 ` Michael Schmitz
2021-06-04 7:54 ` [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari Geert Uytterhoeven
2021-06-04 21:36 ` Michael Schmitz
2021-06-04 23:31 ` Finn Thain
2021-06-05 0:24 ` Finn Thain
2021-06-05 3:48 ` Michael Schmitz
2021-06-09 6:35 ` Geert Uytterhoeven
2021-06-09 7:20 ` Michael Schmitz
2021-06-02 5:21 ` [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used Michael Schmitz
2021-06-02 7:09 ` Geert Uytterhoeven
2021-06-02 8:21 ` Michael Schmitz
2021-06-03 8:29 ` Finn Thain
2021-06-04 3:02 ` Michael Schmitz
2021-06-06 5:28 ` [PATCH] m68k: Fix multiplatform ISA support Michael Schmitz
2021-06-07 7:49 ` Geert Uytterhoeven
2021-06-07 8:17 ` Michael Schmitz
2021-06-09 7:22 ` [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari Michael Schmitz
2021-06-09 7:57 ` Andreas Schwab
2021-06-09 21:43 ` Michael Schmitz
2021-06-10 2:04 ` [PATCH v3] " Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMuHMdUH1LJrrU2VKbtgYvvSVgKk-=1yOW9kWot3EKk=kADZcA@mail.gmail.com' \
--to=geert@linux-m68k.org \
--cc=alex@kazik.de \
--cc=fthain@linux-m68k.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).