From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>, linux-ide@vger.kernel.org
Subject: Re: [PATCH 09/46] libata: move ata_dump_id() to dynamic debugging
Date: Mon, 10 Feb 2020 13:47:24 +0100 [thread overview]
Message-ID: <fef948b4-bff3-6cef-306e-b374435c3671@samsung.com> (raw)
In-Reply-To: <20200204165547.115220-10-hare@suse.de>
On 2/4/20 5:55 PM, Hannes Reinecke wrote:
> Use ata_port_dbg() to print out the information in ata_dump_id()
> and remove the ata_msg_probe() conditional.
Can't we use ata_dev_dbg() instead of ata_port_dbg()?
Otherwise it looks fine.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> Signed-off-by: Hannes Reinecke <hare@suse.de>
> ---
> drivers/ata/libata-core.c | 37 +++++++++----------------------------
> 1 file changed, 9 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index b2b96420a2f2..8a18047f9bcb 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -1449,32 +1449,14 @@ static int ata_hpa_resize(struct ata_device *dev)
> * caller.
> */
>
> -static inline void ata_dump_id(const u16 *id)
> -{
> - DPRINTK("49==0x%04x "
> - "53==0x%04x "
> - "63==0x%04x "
> - "64==0x%04x "
> - "75==0x%04x \n",
> - id[49],
> - id[53],
> - id[63],
> - id[64],
> - id[75]);
> - DPRINTK("80==0x%04x "
> - "81==0x%04x "
> - "82==0x%04x "
> - "83==0x%04x "
> - "84==0x%04x \n",
> - id[80],
> - id[81],
> - id[82],
> - id[83],
> - id[84]);
> - DPRINTK("88==0x%04x "
> - "93==0x%04x\n",
> - id[88],
> - id[93]);
> +static inline void ata_dump_id(struct ata_port *ap, const u16 *id)
> +{
> + ata_port_dbg(ap,
> + "49==0x%04x 53==0x%04x 63==0x%04x 64==0x%04x 75==0x%04x\n"
> + "80==0x%04x 81==0x%04x 82==0x%04x 83==0x%04x 84==0x%04x\n"
> + "88==0x%04x 93==0x%04x\n",
> + id[49], id[53], id[63], id[64], id[75], id[80],
> + id[81], id[82], id[83], id[84], id[88], id[93]);
> }
>
> /**
> @@ -2552,8 +2534,7 @@ int ata_dev_configure(struct ata_device *dev)
> /* find max transfer mode; for printk only */
> xfer_mask = ata_id_xfermask(id);
>
> - if (ata_msg_probe(ap))
> - ata_dump_id(id);
> + ata_dump_id(ap, id);
>
> /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
> ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
>
next prev parent reply other threads:[~2020-02-10 12:47 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-04 16:55 [PATCH 00/46] ata: kill ATA_DEBUG Hannes Reinecke
2020-02-04 16:55 ` [PATCH 01/46] libata: drop BPRINTK() Hannes Reinecke
2020-02-04 16:55 ` [PATCH 02/46] libata.h: whitespace and indentation fixes Hannes Reinecke
2020-02-10 11:51 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 03/46] libata-transport: Whitespace cleanup Hannes Reinecke
2020-02-10 11:52 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 04/46] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros Hannes Reinecke
2020-02-10 12:25 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 05/46] libata: remove pointless debugging messages Hannes Reinecke
2020-02-10 12:34 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 06/46] ata_piix: remove debugging message in piix_init() Hannes Reinecke
2020-02-10 12:36 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 07/46] libata-core: remove pointless debugging messages Hannes Reinecke
2020-02-05 8:08 ` Sergei Shtylyov
2020-02-10 12:37 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 08/46] libata: Add ata_port_classify() helper Hannes Reinecke
2020-02-10 12:44 ` Bartlomiej Zolnierkiewicz
2020-02-13 7:15 ` Hannes Reinecke
2020-02-04 16:55 ` [PATCH 09/46] libata: move ata_dump_id() to dynamic debugging Hannes Reinecke
2020-02-05 1:51 ` kbuild test robot
2020-02-10 12:47 ` Bartlomiej Zolnierkiewicz [this message]
2020-02-04 16:55 ` [PATCH 10/46] sata_mv: replace DPRINTK with 'pci_dump' module parameter Hannes Reinecke
2020-02-10 12:51 ` Bartlomiej Zolnierkiewicz
2020-02-10 12:54 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 11/46] sata_nv: move DPRINTK to ata debugging Hannes Reinecke
2020-02-10 13:25 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 12/46] sata_sx4: move DPRINTK to VPRINTK Hannes Reinecke
2020-02-10 13:29 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 13/46] ata_piix: Drop DPRINTK() statement Hannes Reinecke
2020-02-10 13:32 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 14/46] libata: add reset tracepoints Hannes Reinecke
2020-02-10 13:42 ` Bartlomiej Zolnierkiewicz
2020-02-12 10:11 ` Hannes Reinecke
2020-02-04 16:55 ` [PATCH 15/46] ahci: drop DPRINTK() calls in reset Hannes Reinecke
2020-02-10 13:43 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 16/46] ahci_qorig: " Hannes Reinecke
2020-02-10 13:45 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 17/46] pata_octeon_cf: " Hannes Reinecke
2020-02-10 13:46 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 18/46] libahci: " Hannes Reinecke
2020-02-10 13:46 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 19/46] sata_rcar: " Hannes Reinecke
2020-02-10 13:48 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 20/46] sata_sil24: " Hannes Reinecke
2020-02-10 13:48 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 21/46] sata_fsl: " Hannes Reinecke
2020-02-10 13:49 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 22/46] libata-core: " Hannes Reinecke
2020-02-10 13:50 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 23/46] libata-sff: " Hannes Reinecke
2020-02-10 13:54 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 24/46] libata: tracepoints for bus-master DMA Hannes Reinecke
2020-02-10 15:21 ` Bartlomiej Zolnierkiewicz
2020-02-10 15:23 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 25/46] libata-sff: add tracepoints for HSM state machine Hannes Reinecke
2020-02-10 15:32 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 26/46] pata_octeon_cf: add bmdma tracepoints and drop DPRINTK() Hannes Reinecke
2020-02-10 15:36 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 27/46] sata_rcar: drop DPRINTK call in sata_rcar_exec_command() Hannes Reinecke
2020-02-10 15:37 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 28/46] libata-scsi: drop DPRINTK calls for cdb translation Hannes Reinecke
2020-02-10 15:40 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 29/46] libata-sff: add tracepoints for ata_sff_flush_pio_task() Hannes Reinecke
2020-02-10 15:44 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 30/46] libata-core: add postreset tracepoints Hannes Reinecke
2020-02-10 15:47 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 31/46] pata_octeon_cf: move DPRINTK to VPRINTK Hannes Reinecke
2020-02-10 15:48 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 32/46] pata_pdc202xx_old: Drop DPRINTK in pdc202xx_exec_command() Hannes Reinecke
2020-02-10 15:49 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 33/46] pata_sil680: Drop DPRINTK in sil_sff_exec_command() Hannes Reinecke
2020-02-10 15:51 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 34/46] pdc_adma: move DPRINTK to VPRINTK Hannes Reinecke
2020-02-10 15:52 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 35/46] sata_rcar: " Hannes Reinecke
2020-02-10 15:52 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 36/46] sata_qstor: " Hannes Reinecke
2020-02-10 15:53 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 37/46] pata_pdc2027x: Replace PDPRINTK() with standard ata logging Hannes Reinecke
2020-02-10 15:59 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 38/46] sata_fsl: move DPRINTK to ata debugging Hannes Reinecke
2020-02-10 16:07 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 39/46] libata: add tracepoints for ATA error handling Hannes Reinecke
2020-02-10 16:45 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 40/46] libata-eh: remove DPRINTK() calls for request sense Hannes Reinecke
2020-02-10 16:46 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 41/46] libata-core: move DPRINTK to ata debugging Hannes Reinecke
2020-02-10 16:48 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 42/46] libata: remove DPRINTK() macro Hannes Reinecke
2020-02-04 16:55 ` [PATCH 43/46] libata: kill ATA_MSG_INFO Hannes Reinecke
2020-02-10 16:49 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 44/46] libata: kill ATA_MSG_CTL Hannes Reinecke
2020-02-10 16:49 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 45/46] libata: remove references to ATA_DEBUG Hannes Reinecke
2020-02-10 16:50 ` Bartlomiej Zolnierkiewicz
2020-02-04 16:55 ` [PATCH 46/46] libata: remove ATA_NDEBUG Hannes Reinecke
2020-02-10 16:51 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fef948b4-bff3-6cef-306e-b374435c3671@samsung.com \
--to=b.zolnierkie@samsung.com \
--cc=axboe@kernel.dk \
--cc=hare@suse.de \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).