From: Jishnu Prakash <jprakash@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
mka@chromium.org, linus.walleij@linaro.org,
Jonathan.Cameron@huawei.com, andy.shevchenko@gmail.com,
amit.kucheria@verdurent.com, smohanad@codeaurora.org,
kgunda@codeaurora.org, aghayal@codeaurora.org,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
linux-arm-msm@vger.kernel.org, linux-iio@vger.kernel.org
Cc: linux-arm-msm-owner@vger.kernel.org,
Jishnu Prakash <jprakash@codeaurora.org>
Subject: [PATCH V7 3/7] iio: adc: Add info property under adc_data
Date: Tue, 23 Jun 2020 12:59:55 +0530 [thread overview]
Message-ID: <1592897399-24089-4-git-send-email-jprakash@codeaurora.org> (raw)
In-Reply-To: <1592897399-24089-1-git-send-email-jprakash@codeaurora.org>
Add info property under adc_data to support adding ADC variants
which may use different iio_info than the one defined for PMIC5.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
---
drivers/iio/adc/qcom-spmi-adc5.c | 4 +++-
drivers/iio/adc/qcom-vadc-common.h | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index 21fdcde..0fa1d37 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -629,6 +629,7 @@ static const struct adc5_data adc5_data_pmic = {
.full_scale_code_volt = 0x70e4,
.full_scale_code_cur = 0x2710,
.adc_chans = adc5_chans_pmic,
+ .info = &adc5_info,
.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
{250, 420, 840},
.hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
@@ -643,6 +644,7 @@ static const struct adc5_data adc5_data_pmic_rev2 = {
.full_scale_code_volt = 0x4000,
.full_scale_code_cur = 0x1800,
.adc_chans = adc5_chans_rev2,
+ .info = &adc5_info,
.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
{256, 512, 1024},
.hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
@@ -777,7 +779,7 @@ static int adc5_probe(struct platform_device *pdev)
indio_dev->dev.of_node = node;
indio_dev->name = pdev->name;
indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->info = &adc5_info;
+ indio_dev->info = adc->data->info;
indio_dev->channels = adc->iio_chans;
indio_dev->num_channels = adc->nchannels;
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
index e074902a..6a7553f 100644
--- a/drivers/iio/adc/qcom-vadc-common.h
+++ b/drivers/iio/adc/qcom-vadc-common.h
@@ -136,6 +136,7 @@ struct adc5_data {
const u32 full_scale_code_volt;
const u32 full_scale_code_cur;
const struct adc5_channels *adc_chans;
+ const struct iio_info *info;
unsigned int *decimation;
unsigned int *hw_settle_1;
unsigned int *hw_settle_2;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-06-23 7:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1592897399-24089-1-git-send-email-jprakash@codeaurora.org>
2020-06-23 7:29 ` [PATCH V7 1/7] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format Jishnu Prakash
2020-06-27 13:12 ` Jonathan Cameron
2020-06-23 7:29 ` [PATCH V7 2/7] iio: adc: Add PMIC7 ADC bindings Jishnu Prakash
2020-06-23 7:29 ` Jishnu Prakash [this message]
2020-06-23 8:00 ` [PATCH V7 3/7] iio: adc: Add info property under adc_data Andy Shevchenko
2020-06-23 7:29 ` [PATCH V7 4/7] iio: adc: Add support for PMIC7 ADC Jishnu Prakash
2020-06-23 7:29 ` [PATCH V7 5/7] iio: adc: Update return value checks Jishnu Prakash
2020-06-23 8:03 ` Andy Shevchenko
2020-06-23 7:29 ` [PATCH V7 6/7] iio: adc: Update debug prints Jishnu Prakash
2020-06-23 7:29 ` [PATCH V7 7/7] iio: adc: Combine read functions for PMIC5 and PMIC7 Jishnu Prakash
2020-06-27 13:11 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592897399-24089-4-git-send-email-jprakash@codeaurora.org \
--to=jprakash@codeaurora.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=aghayal@codeaurora.org \
--cc=agross@kernel.org \
--cc=amit.kucheria@verdurent.com \
--cc=andy.shevchenko@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=kgunda@codeaurora.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm-owner@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=pmeerw@pmeerw.net \
--cc=smohanad@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).