From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Philipp Rossak <embed3d@gmail.com>
Cc: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
wens@csie.org, linux@armlinux.org.uk, jic23@kernel.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
eugen.hristev@microchip.com, rdunlap@infradead.org,
vilhelm.gray@gmail.com, clabbe.montjoie@gmail.com,
quentin.schulz@bootlin.com, geert+renesas@glider.be,
lukas@wunner.de, icenowy@aosc.io, arnd@arndb.de,
broonie@kernel.org, arnaud.pouliquen@st.com,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH v3 10/30] iio: adc: rework irq and adc_channel handling
Date: Fri, 31 Aug 2018 10:44:37 +0200 [thread overview]
Message-ID: <20180831084437.mxcwf4wbrxbpoa5e@flea> (raw)
In-Reply-To: <20180830154518.29507-11-embed3d@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 12941 bytes --]
Hi,
On Thu, Aug 30, 2018 at 05:44:58PM +0200, Philipp Rossak wrote:
> We rework the irq handling and the adc_channel handling.
> This is requiered since we merge the mfd driver into the adc driver.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
This patch is actually the opposite of the previous ones, it has too
many things in it, and sohuld be split :)
> ---
> drivers/iio/adc/sun4i-gpadc-iio.c | 157 ++++++++++++++++++++++++--------------
> include/linux/mfd/sun4i-gpadc.h | 7 --
> 2 files changed, 98 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index 658a7e3e3370..a2027614ee0c 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -49,6 +49,8 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
> return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
> }
>
> +struct sun4i_gpadc_iio;
> +
> struct gpadc_data {
> int temp_offset;
> int temp_scale;
> @@ -56,8 +58,15 @@ struct gpadc_data {
> unsigned int tp_adc_select;
> unsigned int (*adc_chan_select)(unsigned int chan);
> unsigned int adc_chan_mask;
> + bool adc_channel;
> + irqreturn_t (*ths_irq_thread)(int irq, void *dev_id);
> + int (*ths_suspend)(struct sun4i_gpadc_iio *info);
> + int (*ths_resume)(struct sun4i_gpadc_iio *info);
> + bool support_irq;
> };
>
> +static irqreturn_t sun4i_gpadc_data_irq_handler(int irq, void *dev_id);
> +
> static const struct gpadc_data sun4i_gpadc_data = {
> .temp_offset = -1932,
> .temp_scale = 133,
> @@ -65,6 +74,9 @@ static const struct gpadc_data sun4i_gpadc_data = {
> .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
> .adc_chan_select = &sun4i_gpadc_chan_select,
> .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
> + .adc_channel = true,
> + .ths_irq_thread = sun4i_gpadc_data_irq_handler,
> + .support_irq = true,
> };
>
> static const struct gpadc_data sun5i_gpadc_data = {
> @@ -74,6 +86,9 @@ static const struct gpadc_data sun5i_gpadc_data = {
> .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
> .adc_chan_select = &sun4i_gpadc_chan_select,
> .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
> + .adc_channel = true,
> + .ths_irq_thread = sun4i_gpadc_data_irq_handler,
> + .support_irq = true,
> };
>
> static const struct gpadc_data sun6i_gpadc_data = {
> @@ -83,6 +98,9 @@ static const struct gpadc_data sun6i_gpadc_data = {
> .tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
> .adc_chan_select = &sun6i_gpadc_chan_select,
> .adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
> + .adc_channel = true,
> + .ths_irq_thread = sun4i_gpadc_data_irq_handler,
> + .support_irq = true,
So this seems to enable the support for the interrupts without going
through the MFD regmap that was removed in the previous patches.
> };
>
> static const struct gpadc_data sun8i_a33_gpadc_data = {
> @@ -96,13 +114,10 @@ struct sun4i_gpadc_iio {
> struct completion completion;
> int temp_data;
> u32 adc_data;
> + unsigned int irq_data_type;
> struct regmap *regmap;
> - unsigned int fifo_data_irq;
> - atomic_t ignore_fifo_data_irq;
> - unsigned int temp_data_irq;
> - atomic_t ignore_temp_data_irq;
> + unsigned int irq;
> const struct gpadc_data *data;
> - bool no_irq;
But at the same time, you remove some fields of that structure, and
rename some other without any explanation.
> /* prevents concurrent reads of temperature and ADC */
> struct mutex mutex;
> struct thermal_zone_device *tzd;
> @@ -130,6 +145,20 @@ static const struct regmap_config sun4i_gpadc_regmap_config = {
> .fast_io = true,
> };
>
> +static int sun4i_gpadc_irq_init(struct sun4i_gpadc_iio *info)
> +{
> + u32 reg;
> +
> + if (info->irq_data_type == SUN4I_GPADC_IRQ_FIFO_DATA)
> + reg = SUN4I_GPADC_INT_FIFOC_TEMP_IRQ_EN;
> + else
> + reg = SUN4I_GPADC_INT_FIFOC_TEMP_IRQ_EN;
> +
> + regmap_write(info->regmap, SUN4I_GPADC_INT_FIFOC, reg);
> +
> + return 0;
> +}
> +
> static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
> unsigned int irq)
> {
> @@ -151,7 +180,7 @@ static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
> if (ret)
> return ret;
>
> - if (irq == info->fifo_data_irq) {
> + if (irq == SUN4I_GPADC_IRQ_FIFO_DATA) {
> ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
> info->data->tp_mode_en |
> info->data->tp_adc_select |
> @@ -172,6 +201,8 @@ static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
> ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
> info->data->tp_mode_en);
> }
> + if (info->data->support_irq)
> + sun4i_gpadc_irq_init(info);
>
> if (ret)
> return ret;
> @@ -194,11 +225,12 @@ static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
>
> mutex_lock(&info->mutex);
>
> + info->irq_data_type = irq;
This would need to be explained too
> ret = sun4i_prepare_for_irq(indio_dev, channel, irq);
> if (ret)
> goto err;
>
> - enable_irq(irq);
> + enable_irq(info->irq);
>
> /*
> * The temperature sensor throws an interruption periodically (currently
> @@ -212,7 +244,7 @@ static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
> goto err;
> }
>
> - if (irq == info->fifo_data_irq)
> + if (irq == SUN4I_GPADC_IRQ_FIFO_DATA)
> *val = info->adc_data;
> else
> *val = info->temp_data;
> @@ -222,7 +254,7 @@ static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
>
> err:
> pm_runtime_put_autosuspend(indio_dev->dev.parent);
> - disable_irq(irq);
> + disable_irq(info->irq);
> mutex_unlock(&info->mutex);
>
> return ret;
> @@ -231,16 +263,15 @@ static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
> static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
> int *val)
> {
> - struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
> -
> - return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq);
> + return sun4i_gpadc_read(indio_dev, channel, val,
> + SUN4I_GPADC_IRQ_FIFO_DATA);
> }
>
> static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
> {
> struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
>
> - if (info->no_irq) {
> + if (!info->data->support_irq) {
> pm_runtime_get_sync(indio_dev->dev.parent);
>
> regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
> @@ -251,7 +282,7 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
> return 0;
> }
>
> - return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
> + return sun4i_gpadc_read(indio_dev, 0, val, SUN4I_GPADC_IRQ_TEMP_DATA);
> }
>
> static int sun4i_gpadc_temp_offset(struct iio_dev *indio_dev, int *val)
> @@ -320,31 +351,21 @@ static const struct iio_info sun4i_gpadc_iio_info = {
> .read_raw = sun4i_gpadc_read_raw,
> };
>
> -static irqreturn_t sun4i_gpadc_temp_data_irq_handler(int irq, void *dev_id)
> +static irqreturn_t sun4i_gpadc_data_irq_handler(int irq, void *dev_id)
> {
> struct sun4i_gpadc_iio *info = dev_id;
>
> - if (atomic_read(&info->ignore_temp_data_irq))
> - goto out;
> -
> - if (!regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, &info->temp_data))
> - complete(&info->completion);
> -
> -out:
> - return IRQ_HANDLED;
> -}
> -
> -static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
> -{
> - struct sun4i_gpadc_iio *info = dev_id;
> -
> - if (atomic_read(&info->ignore_fifo_data_irq))
> - goto out;
> -
> - if (!regmap_read(info->regmap, SUN4I_GPADC_DATA, &info->adc_data))
> - complete(&info->completion);
> -
> -out:
> + if (info->irq_data_type == SUN4I_GPADC_IRQ_FIFO_DATA) {
> + /* read fifo data */
> + if (!regmap_read(info->regmap, SUN4I_GPADC_DATA,
> + &info->adc_data))
> + complete(&info->completion);
> + } else {
> + /* read temp data */
> + if (!regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA,
> + &info->temp_data))
> + complete(&info->completion);
> + }
> return IRQ_HANDLED;
> }
>
> @@ -356,6 +377,8 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
> regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
> /* Disable temperature sensor on IP */
> regmap_write(info->regmap, SUN4I_GPADC_TPR, 0);
> + /* Disable irq*/
> + regmap_write(info->regmap, SUN4I_GPADC_INT_FIFOC, 0);
>
> return 0;
> }
> @@ -378,6 +401,7 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
> SUN4I_GPADC_TPR_TEMP_ENABLE |
> SUN4I_GPADC_TPR_TEMP_PERIOD(800));
>
> +
> return 0;
> }
>
> @@ -426,8 +450,6 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
> if (!info->data)
> return -ENODEV;
>
> - info->no_irq = true;
> -
> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> base = devm_ioremap_resource(&pdev->dev, mem);
> if (IS_ERR(base))
> @@ -441,8 +463,25 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
> return ret;
> }
>
> - if (IS_ENABLED(CONFIG_THERMAL_OF))
> - info->sensor_device = &pdev->dev;
You're also dropping the THERMAL_OF conditions
> + if (info->data->support_irq) {
> +
> + /* ths interrupt */
> + info->irq = platform_get_irq(pdev, 0);
> +
> + ret = devm_request_threaded_irq(&pdev->dev, info->irq,
> + NULL, info->data->ths_irq_thread,
> + IRQF_ONESHOT, dev_name(&pdev->dev), info);
Why do you need a threaded interrupt?
> + if (info->data->adc_channel)
> + disable_irq(info->irq);
Does it still needs to be disabled? Why?
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add ths irq: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + info->sensor_device = &pdev->dev;
>
> return 0;
> }
> @@ -469,6 +508,11 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
> indio_dev->info = &sun4i_gpadc_iio_info;
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> + if (&info->data->adc_channel) {
> + indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
> + indio_dev->channels = sun4i_gpadc_channels;
> + }
> +
> ret = sun4i_gpadc_probe_dt(pdev, indio_dev);
>
> if (ret)
> @@ -480,20 +524,18 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
> pm_runtime_set_suspended(&pdev->dev);
> pm_runtime_enable(&pdev->dev);
>
> - if (IS_ENABLED(CONFIG_THERMAL_OF)) {
> - info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
> - 0, info,
> - &sun4i_ts_tz_ops);
> - /*
> - * Do not fail driver probing when failing to register in
> - * thermal because no thermal DT node is found.
> - */
> - if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
> - dev_err(&pdev->dev,
> - "could not register thermal sensor: %ld\n",
> - PTR_ERR(info->tzd));
> - return PTR_ERR(info->tzd);
> - }
> + info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
> + 0, info,
> + &sun4i_ts_tz_ops);
> + /*
> + * Do not fail driver probing when failing to register in
> + * thermal because no thermal DT node is found.
> + */
> + if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
> + dev_err(&pdev->dev,
> + "could not register thermal sensor: %ld\n",
> + PTR_ERR(info->tzd));
> + return PTR_ERR(info->tzd);
> }
>
> ret = devm_iio_device_register(&pdev->dev, indio_dev);
> @@ -505,7 +547,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
> return 0;
>
> err_map:
> - if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
> + if (!info->data->support_irq)
> iio_map_array_unregister(indio_dev);
>
> pm_runtime_put(&pdev->dev);
> @@ -522,12 +564,9 @@ static int sun4i_gpadc_remove(struct platform_device *pdev)
> pm_runtime_put(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
>
> - if (!IS_ENABLED(CONFIG_THERMAL_OF))
> - return 0;
> -
> thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd);
>
> - if (!info->no_irq)
> + if (!info->data->support_irq)
> iio_map_array_unregister(indio_dev);
>
> return 0;
> diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
> index 54c7c9375c1b..ca59336f246b 100644
> --- a/include/linux/mfd/sun4i-gpadc.h
> +++ b/include/linux/mfd/sun4i-gpadc.h
> @@ -99,11 +99,4 @@
> .datasheet_name = _name, \
> }
>
> -struct sun4i_gpadc_dev {
> - struct device *dev;
> - struct regmap *regmap;
> - struct regmap_irq_chip_data *regmap_irqc;
> - void __iomem *base;
> -};
And you're dropping that structure.
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2018-08-31 12:51 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 15:44 [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 01/30] mfd: Makefile: Remove build option for MFD:sun4i-gpadc Philipp Rossak
2018-08-31 8:25 ` Maxime Ripard
2018-09-02 19:58 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 02/30] mfd: Kconfig: Remove MFD_SUN4I_GPADC config option Philipp Rossak
2018-09-02 19:58 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 03/30] iio: adc: Remove ID table Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 04/30] iio: adc: Kconfig: Update Kconfig to new build options Philipp Rossak
2018-08-31 8:32 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 05/30] iio: adc: move SUN4I_GPADC_CHANNEL define to header file Philipp Rossak
2018-09-02 20:01 ` Jonathan Cameron
2018-09-03 14:24 ` Philipp Rossak
2018-09-03 17:28 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 06/30] iio: adc: remove ofnode options Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 07/30] iio: adc: remove mfd_probe & sunwi_irq_init function Philipp Rossak
2018-08-31 8:34 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 08/30] iio: adc: remove hwmon structure Philipp Rossak
2018-08-31 8:34 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 09/30] iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i channel Philipp Rossak
2018-08-30 16:40 ` [linux-sunxi] " Ondřej Jirman
2018-08-31 8:35 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 10/30] iio: adc: rework irq and adc_channel handling Philipp Rossak
2018-08-31 8:44 ` Maxime Ripard [this message]
2018-08-30 15:44 ` [PATCH v3 11/30] iio: adc: add new compatibles Philipp Rossak
2018-08-31 8:46 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 12/30] mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/ Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 13/30] arm: config: Enable SUN4I_GPADC in defconfig Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T Philipp Rossak
2018-08-31 8:48 ` Maxime Ripard
2018-09-10 19:44 ` Rob Herring
2018-09-11 9:12 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 15/30] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 16/30] iio: adc: sun4i-gpadc-iio: rework: readout temp_data Philipp Rossak
2018-08-31 8:50 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 17/30] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset Philipp Rossak
2018-08-31 9:03 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 18/30] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors Philipp Rossak
2018-08-31 9:05 ` Maxime Ripard
2018-09-02 20:11 ` Jonathan Cameron
2018-09-03 13:58 ` Philipp Rossak
2018-09-03 17:29 ` Jonathan Cameron
2018-08-30 15:45 ` [PATCH v3 19/30] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data Philipp Rossak
2018-08-31 9:07 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 20/30] iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume Philipp Rossak
2018-08-31 9:09 ` Maxime Ripard
2018-08-31 12:05 ` Philipp Rossak
2018-09-03 9:44 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 21/30] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Philipp Rossak
2018-08-30 16:27 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 20:00 ` Philipp Rossak
2018-08-30 20:46 ` Philipp Rossak
2018-08-31 9:11 ` Maxime Ripard
2018-08-31 9:51 ` Icenowy Zheng
2018-08-31 11:58 ` [linux-sunxi] " Philipp Rossak
2018-09-03 10:20 ` Maxime Ripard
2018-09-03 11:01 ` [linux-sunxi] " Icenowy Zheng
2018-09-05 14:58 ` Maxime Ripard
2018-08-31 12:01 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 22/30] iio: adc: sun4i-gpadc-iio: add support for A83T " Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 23/30] ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 24/30] ARM: dts: sun8i: h3: add support for the thermal sensor in H3 Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 25/30] ARM: dts: sun8i: h3: add thermal zone to H3 Philipp Rossak
2018-08-31 9:14 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 26/30] ARM: dts: sun8i: h3: enable H3 sid controller Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 27/30] ARM: dts: sun8i: h3: use calibration for ths Philipp Rossak
2018-09-04 16:46 ` Emmanuel Vadot
2018-09-06 11:47 ` Philipp Rossak
2018-09-06 11:51 ` Maxime Ripard
2018-09-06 12:04 ` [linux-sunxi] " Icenowy Zheng
2018-09-06 12:18 ` Philipp Rossak
2019-02-19 7:54 ` Allwinner SID THS calibration data cell representation? Chen-Yu Tsai
2019-02-20 14:55 ` Maxime Ripard
2019-02-21 10:10 ` Emmanuel Vadot
2019-02-25 20:37 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 28/30] ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 29/30] ARM: dts: sun8i: a83t: add thermal zone to A83T Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 30/30] ARM: sun8i: a83t: full range OPP tables and CPUfreq Philipp Rossak
2018-08-30 16:38 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 20:29 ` Philipp Rossak
2018-09-06 7:24 ` Quentin Schulz
2018-09-06 11:39 ` Philipp Rossak
2018-09-06 11:42 ` Maxime Ripard
2018-09-06 12:06 ` Quentin Schulz
2019-03-19 12:30 ` [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Måns Rullgård
2019-03-19 12:37 ` Maxime Ripard
2019-03-19 13:04 ` [linux-sunxi] " Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831084437.mxcwf4wbrxbpoa5e@flea \
--to=maxime.ripard@bootlin.com \
--cc=arnaud.pouliquen@st.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=embed3d@gmail.com \
--cc=eugen.hristev@microchip.com \
--cc=geert+renesas@glider.be \
--cc=icenowy@aosc.io \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=lukas@wunner.de \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=quentin.schulz@bootlin.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=vilhelm.gray@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).