From: Mircea Caprioru <mircea.caprioru@analog.com>
To: <jic23@kernel.org>
Cc: <Michael.Hennerich@analog.com>, <stefan.popa@analog.com>,
<lars@metafoo.de>, <gregkh@linuxfoundation.org>,
<linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>,
Mircea Caprioru <mircea.caprioru@analog.com>
Subject: [PATCH] staging: iio: adc: ad7192: Use read_avail for available attributes
Date: Tue, 19 Mar 2019 16:25:20 +0200 [thread overview]
Message-ID: <20190319142520.664-1-mircea.caprioru@analog.com> (raw)
This patch removes the in_voltage-voltage_scale_available and
in_voltage_scale_available attributes. These are replaced with available
attributes added in info_mask_shared_by_type_available.
With this modification the iio core will be responsible with naming the
attributes thus removing the checkpatch warning related to
in_voltage-voltage_scale_available naming.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
---
drivers/staging/iio/adc/ad7192.c | 99 ++++++++++++++++++++------------
1 file changed, 61 insertions(+), 38 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index acdbc07fd259..d8a20f9066f4 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -337,30 +337,6 @@ static int ad7192_setup(struct ad7192_state *st,
return ret;
}
-static ssize_t
-ad7192_show_scale_available(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ad7192_state *st = iio_priv(indio_dev);
- int i, len = 0;
-
- for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
- len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
- st->scale_avail[i][1]);
-
- len += sprintf(buf + len, "\n");
-
- return len;
-}
-
-static IIO_DEVICE_ATTR_NAMED(in_v_m_v_scale_available,
- in_voltage-voltage_scale_available,
- 0444, ad7192_show_scale_available, NULL, 0);
-
-static IIO_DEVICE_ATTR(in_voltage_scale_available, 0444,
- ad7192_show_scale_available, NULL, 0);
-
static ssize_t ad7192_show_ac_excitation(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -435,8 +411,6 @@ static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
AD7192_REG_MODE);
static struct attribute *ad7192_attributes[] = {
- &iio_dev_attr_in_v_m_v_scale_available.dev_attr.attr,
- &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
&iio_dev_attr_bridge_switch_en.dev_attr.attr,
&iio_dev_attr_ac_excitation_en.dev_attr.attr,
NULL
@@ -447,8 +421,6 @@ static const struct attribute_group ad7192_attribute_group = {
};
static struct attribute *ad7195_attributes[] = {
- &iio_dev_attr_in_v_m_v_scale_available.dev_attr.attr,
- &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
&iio_dev_attr_bridge_switch_en.dev_attr.attr,
NULL
};
@@ -579,10 +551,31 @@ static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev,
}
}
+static int ad7192_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (int *)st->scale_avail;
+ *type = IIO_VAL_INT_PLUS_NANO;
+ /* Values are stored in a 2D matrix */
+ *length = ARRAY_SIZE(st->scale_avail) * 2;
+
+ return IIO_AVAIL_LIST;
+ }
+
+ return -EINVAL;
+}
+
static const struct iio_info ad7192_info = {
.read_raw = ad7192_read_raw,
.write_raw = ad7192_write_raw,
.write_raw_get_fmt = ad7192_write_raw_get_fmt,
+ .read_avail = ad7192_read_avail,
.attrs = &ad7192_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
@@ -591,6 +584,7 @@ static const struct iio_info ad7195_info = {
.read_raw = ad7192_read_raw,
.write_raw = ad7192_write_raw,
.write_raw_get_fmt = ad7192_write_raw_get_fmt,
+ .read_avail = ad7192_read_avail,
.attrs = &ad7195_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
@@ -625,6 +619,42 @@ static const struct iio_chan_spec ad7193_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(14),
};
+static int ad7192_channels_config(struct iio_dev *indio_dev)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+ const struct iio_chan_spec *channels;
+ struct iio_chan_spec *chan;
+ int i;
+
+ switch (st->devid) {
+ case ID_AD7193:
+ channels = ad7193_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
+ break;
+ default:
+ channels = ad7192_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
+ break;
+ }
+
+ chan = devm_kcalloc(indio_dev->dev.parent, indio_dev->num_channels,
+ sizeof(*chan), GFP_KERNEL);
+ if (!chan)
+ return -ENOMEM;
+
+ indio_dev->channels = chan;
+
+ for (i = 0; i < indio_dev->num_channels; i++) {
+ *chan = channels[i];
+ if (chan->type != IIO_TEMP)
+ chan->info_mask_shared_by_type_available |=
+ BIT(IIO_CHAN_INFO_SCALE);
+ chan++;
+ }
+
+ return 0;
+}
+
static int ad7192_probe(struct spi_device *spi)
{
const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev);
@@ -687,16 +717,9 @@ static int ad7192_probe(struct spi_device *spi)
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
- switch (st->devid) {
- case ID_AD7193:
- indio_dev->channels = ad7193_channels;
- indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
- break;
- default:
- indio_dev->channels = ad7192_channels;
- indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
- break;
- }
+ ret = ad7192_channels_config(indio_dev);
+ if (ret < 0)
+ goto error_disable_dvdd;
if (st->devid == ID_AD7195)
indio_dev->info = &ad7195_info;
--
2.17.1
next reply other threads:[~2019-03-19 14:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 14:25 Mircea Caprioru [this message]
2019-03-24 17:34 ` [PATCH] staging: iio: adc: ad7192: Use read_avail for available attributes Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319142520.664-1-mircea.caprioru@analog.com \
--to=mircea.caprioru@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stefan.popa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).