From: Jonathan Cameron <jic23@kernel.org>
To: Denis Ciocca <denis.ciocca@st.com>
Cc: <linux-iio@vger.kernel.org>
Subject: Re: [PATCH v2 01/11] iio:common:st_sensors: add st_sensors_get_settings_index() helper function
Date: Sun, 21 Jul 2019 18:48:05 +0100 [thread overview]
Message-ID: <20190721184805.57cd0687@archlinux> (raw)
In-Reply-To: <20190718225353.2078-2-denis.ciocca@st.com>
On Thu, 18 Jul 2019 15:53:43 -0700
Denis Ciocca <denis.ciocca@st.com> wrote:
> Extract from st_sensors_check_device_support() function the code that
> is used to get the specific settings for a device. This will be used
> as generic extractor by each ST driver.
>
> Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
> Changes in v2:
> return immediately in st_sensors_settings_index after device name is found
> remove err initialization inside st_sensors_check_device_support
>
> .../iio/common/st_sensors/st_sensors_core.c | 49 +++++++++++++------
> include/linux/iio/common/st_sensors.h | 4 ++
> 2 files changed, 38 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> index 8b22dc241482..3610ca9eaa87 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -633,28 +633,47 @@ static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
> return 0;
> }
>
> +/*
> + * st_sensors_get_settings_index() - get index of the sensor settings for a
> + * specific device from list of settings
> + * @name: device name buffer reference.
> + * @list: sensor settings list.
> + * @list_length: length of sensor settings list.
> + *
> + * Return: non negative number on success (valid index),
> + * negative error code otherwise.
> + */
> +int st_sensors_get_settings_index(const char *name,
> + const struct st_sensor_settings *list,
> + const int list_length)
> +{
> + int i, n;
> +
> + for (i = 0; i < list_length; i++) {
> + for (n = 0; n < ST_SENSORS_MAX_4WAI; n++) {
> + if (strcmp(name, list[i].sensors_supported[n]) == 0)
> + return i;
> + }
> + }
> +
> + return -ENODEV;
> +}
> +EXPORT_SYMBOL(st_sensors_get_settings_index);
> +
> int st_sensors_check_device_support(struct iio_dev *indio_dev,
> int num_sensors_list,
> const struct st_sensor_settings *sensor_settings)
> {
> - int i, n, err = 0;
> - u8 wai;
> struct st_sensor_data *sdata = iio_priv(indio_dev);
> + int i, err;
> + u8 wai;
>
> - for (i = 0; i < num_sensors_list; i++) {
> - for (n = 0; n < ST_SENSORS_MAX_4WAI; n++) {
> - if (strcmp(indio_dev->name,
> - sensor_settings[i].sensors_supported[n]) == 0) {
> - break;
> - }
> - }
> - if (n < ST_SENSORS_MAX_4WAI)
> - break;
> - }
> - if (i == num_sensors_list) {
> + i = st_sensors_get_settings_index(indio_dev->name,
> + sensor_settings, num_sensors_list);
> + if (i < 0) {
> dev_err(&indio_dev->dev, "device name %s not recognized.\n",
> - indio_dev->name);
> - return -ENODEV;
> + indio_dev->name);
> + return i;
> }
>
> err = st_sensors_init_interface_mode(indio_dev, &sensor_settings[i]);
> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> index 2948ac99e2da..17fbf3e9b013 100644
> --- a/include/linux/iio/common/st_sensors.h
> +++ b/include/linux/iio/common/st_sensors.h
> @@ -334,6 +334,10 @@ int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale);
> int st_sensors_read_info_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *ch, int *val);
>
> +int st_sensors_get_settings_index(const char *name,
> + const struct st_sensor_settings *list,
> + const int list_length);
> +
> int st_sensors_check_device_support(struct iio_dev *indio_dev,
> int num_sensors_list, const struct st_sensor_settings *sensor_settings);
>
next prev parent reply other threads:[~2019-07-21 17:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 22:53 [PATCH v2 00/11] iio:st_sensors: make use of regmap API Denis Ciocca
2019-07-18 22:53 ` [PATCH v2 01/11] iio:common:st_sensors: add st_sensors_get_settings_index() helper function Denis Ciocca
2019-07-21 17:48 ` Jonathan Cameron [this message]
2019-07-18 22:53 ` [PATCH v2 02/11] iio:accel: introduce st_accel_get_settings() function Denis Ciocca
2019-07-21 17:48 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 03/11] iio:gyro: introduce st_gyro_get_settings() function Denis Ciocca
2019-07-21 17:50 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 04/11] iio:magn: introduce st_magn_get_settings() function Denis Ciocca
2019-07-21 17:51 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 05/11] iio:pressure: introduce st_press_get_settings() function Denis Ciocca
2019-07-21 17:52 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 06/11] iio:accel: device settings are set immediately during probe Denis Ciocca
2019-07-21 17:54 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 07/11] iio:gyro: " Denis Ciocca
2019-07-21 17:55 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 08/11] iio:magn: " Denis Ciocca
2019-07-21 17:56 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 09/11] iio:pressure: " Denis Ciocca
2019-07-18 22:53 ` [PATCH v2 10/11] iio: move 3-wire spi initialization to st_sensors_spi Denis Ciocca
2019-07-21 17:58 ` Jonathan Cameron
2019-07-21 18:03 ` Jonathan Cameron
2019-07-22 19:53 ` Denis CIOCCA
2019-07-18 22:53 ` [PATCH v2 11/11] iio: make st_sensors drivers use regmap Denis Ciocca
2019-07-21 18:05 ` Jonathan Cameron
2019-07-22 19:53 ` Denis CIOCCA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190721184805.57cd0687@archlinux \
--to=jic23@kernel.org \
--cc=denis.ciocca@st.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).