> 
> 
> On 12/09/2019 09.06, Sean Nyekjaer wrote:
> > This add ways for the SoC to wake from accelerometer wake events.
> > 
> > In the suspend function we skip disabling the sensor if wakeup-source
> > and events are activated.
> > 
> > Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> > ---
> > Changes since v4:
> >   * More devices supports wakeup
> > 
> > Changes since v5:
> >   * None
> > 
> > Changes since v6:
> >   * None
> > 
> >   drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 14 ++++++++++++++
> >   1 file changed, 14 insertions(+)
> > 
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index 4198ba263d03..f79978a2870f 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -1858,6 +1858,9 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
> >   			return err;
> >   	}
> > +	if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
> > +		device_init_wakeup(dev, true);
> > +
> >   	return 0;
> >   }
> >   EXPORT_SYMBOL(st_lsm6dsx_probe);
> > @@ -1876,6 +1879,12 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
> >   		if (!(hw->enable_mask & BIT(sensor->id)))
> >   			continue;
> > +		if (device_may_wakeup(dev) && i == ST_LSM6DSX_ID_ACC) {
> > +			/* Enable wake from IRQ */
> > +			enable_irq_wake(hw->irq);
> > +			continue;

I guess here we need even to check hw->event_enable, don't we?

> > +		}
> > +
> >   		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
> >   		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
> >   		    sensor->id == ST_LSM6DSX_ID_EXT2)
> > @@ -1908,6 +1917,11 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
> >   		if (!(hw->suspend_mask & BIT(sensor->id)))
> >   			continue;
> > +		if (device_may_wakeup(dev) && i == ST_LSM6DSX_ID_ACC) {
> > +			disable_irq_wake(hw->irq);
> > +			continue;
> > +		}
> > +
> This section needs to move above:

agree, and we probably do not need 'continue'. Moreover I guess we should check
hw->event_enable even here, right?

> >   		if (!(hw->enable_mask & BIT(sensor->id)))
> In the current configuration it will never be reached in event only mode
> 
> With the bug mentioned above fixed, have tested suspend/wake with and
> without FIFO enabled.