From: Jonathan Cameron <jic23@kernel.org>
To: Sean Nyekjaer <sean@geanix.com>
Cc: linux-iio@vger.kernel.org, lorenzo.bianconi83@gmail.com,
denis.ciocca@st.com, mario.tesi@st.com, armando.visconti@st.com,
martin@geanix.com
Subject: Re: [PATCH v8 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
Date: Sun, 15 Sep 2019 13:30:40 +0100 [thread overview]
Message-ID: <20190915133040.0953ef1a@archlinux> (raw)
In-Reply-To: <20190913090708.1442057-6-sean@geanix.com>
On Fri, 13 Sep 2019 11:07:08 +0200
Sean Nyekjaer <sean@geanix.com> wrote:
> Report iio motion events to iio subsystem
>
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
I got to the earlier thread rather late so hadn't replied to your
question on filtering events that haven't been enabled.
Hence I think it's just that change outstanding
+ I want to give Lorenzo time for a final look.
Thanks,
Jonathan
> ---
> Changes since v4:
> * Updated bitmask as pr Jonathans comments
>
> Changes since v5:
> * None
>
> Changes since v6:
> * None
>
> Changes since v7:
> * None
>
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 ++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 70 ++++++++++++++++++++
> 2 files changed, 75 insertions(+)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 449c2798f7ed..7c50fac7b85c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -186,6 +186,11 @@ struct st_lsm6dsx_shub_settings {
> struct st_lsm6dsx_event_settings {
> struct st_lsm6dsx_reg enable_reg;
> struct st_lsm6dsx_reg wakeup_reg;
> + u8 wakeup_src_reg;
> + u8 wakeup_src_status_mask;
> + u8 wakeup_src_z_mask;
> + u8 wakeup_src_y_mask;
> + u8 wakeup_src_x_mask;
> };
>
> enum st_lsm6dsx_ext_sensor_id {
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 80a94335175f..66700c20920d 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -48,6 +48,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/delay.h>
> +#include <linux/iio/events.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> #include <linux/interrupt.h>
> @@ -287,6 +288,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .addr = 0x5B,
> .mask = GENMASK(5, 0),
> },
> + .wakeup_src_reg = 0x1b,
> + .wakeup_src_status_mask = BIT(3),
> + .wakeup_src_z_mask = BIT(0),
> + .wakeup_src_y_mask = BIT(1),
> + .wakeup_src_x_mask = BIT(2),
> },
> },
> {
> @@ -412,6 +418,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .addr = 0x5B,
> .mask = GENMASK(5, 0),
> },
> + .wakeup_src_reg = 0x1b,
> + .wakeup_src_status_mask = BIT(3),
> + .wakeup_src_z_mask = BIT(0),
> + .wakeup_src_y_mask = BIT(1),
> + .wakeup_src_x_mask = BIT(2),
> },
> },
> {
> @@ -550,6 +561,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .addr = 0x5B,
> .mask = GENMASK(5, 0),
> },
> + .wakeup_src_reg = 0x1b,
> + .wakeup_src_status_mask = BIT(3),
> + .wakeup_src_z_mask = BIT(0),
> + .wakeup_src_y_mask = BIT(1),
> + .wakeup_src_x_mask = BIT(2),
> },
> },
> {
> @@ -816,6 +832,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .addr = 0x5B,
> .mask = GENMASK(5, 0),
> },
> + .wakeup_src_reg = 0x1b,
> + .wakeup_src_status_mask = BIT(3),
> + .wakeup_src_z_mask = BIT(0),
> + .wakeup_src_y_mask = BIT(1),
> + .wakeup_src_x_mask = BIT(2),
> },
> },
> {
> @@ -970,6 +991,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .addr = 0x5B,
> .mask = GENMASK(5, 0),
> },
> + .wakeup_src_reg = 0x1b,
> + .wakeup_src_status_mask = BIT(3),
> + .wakeup_src_z_mask = BIT(0),
> + .wakeup_src_y_mask = BIT(1),
> + .wakeup_src_x_mask = BIT(2),
> }
> },
> };
> @@ -1715,6 +1741,38 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
> return iio_dev;
> }
>
> +void st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw, int data)
> +{
> + s64 timestamp = iio_get_time_ns(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
> +
> + if (data & hw->settings->event_settings.wakeup_src_z_mask)
> + iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
> + IIO_MOD_EVENT_CODE(IIO_ACCEL,
> + 0,
> + IIO_MOD_Z,
> + IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_EITHER),
> + timestamp);
> +
> + if (data & hw->settings->event_settings.wakeup_src_x_mask)
> + iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
> + IIO_MOD_EVENT_CODE(IIO_ACCEL,
> + 0,
> + IIO_MOD_Y,
> + IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_EITHER),
> + timestamp);
> +
> + if (data & hw->settings->event_settings.wakeup_src_x_mask)
> + iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
> + IIO_MOD_EVENT_CODE(IIO_ACCEL,
> + 0,
> + IIO_MOD_X,
> + IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_EITHER),
> + timestamp);
> +}
> +
> static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> {
> return IRQ_WAKE_THREAD;
> @@ -1724,6 +1782,18 @@ static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
> {
> struct st_lsm6dsx_hw *hw = private;
> int count;
> + int data, err;
> +
> + if (hw->enable_event) {
> + err = regmap_read(hw->regmap,
> + hw->settings->event_settings.wakeup_src_reg,
> + &data);
> + if (err < 0)
> + return IRQ_NONE;
> +
> + if (data & hw->settings->event_settings.wakeup_src_status_mask)
> + st_lsm6dsx_report_motion_event(hw, data);
> + }
>
> mutex_lock(&hw->fifo_lock);
> count = hw->settings->fifo_ops.read_fifo(hw);
next prev parent reply other threads:[~2019-09-15 12:30 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-13 9:07 [PATCH v8 0/5] enable motion events for st_lsm6dsx Sean Nyekjaer
2019-09-13 9:07 ` [PATCH v8 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core Sean Nyekjaer
2019-09-13 9:07 ` [PATCH v8 2/5] iio: imu: st_lsm6dsx: add motion events Sean Nyekjaer
2019-09-13 9:07 ` [PATCH v8 3/5] iio: imu: st_lsm6dsx: add wakeup-source option Sean Nyekjaer
2019-09-15 13:42 ` Lorenzo Bianconi
2019-09-13 9:07 ` [PATCH v8 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread Sean Nyekjaer
2019-09-15 12:33 ` Jonathan Cameron
2019-09-15 12:48 ` Lorenzo Bianconi
2019-09-15 13:00 ` Jonathan Cameron
2019-09-15 13:07 ` Lorenzo Bianconi
2019-09-13 9:07 ` [PATCH v8 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt Sean Nyekjaer
2019-09-15 12:30 ` Jonathan Cameron [this message]
2019-09-15 13:05 ` Lorenzo Bianconi
2019-09-15 13:18 ` Jonathan Cameron
2019-09-15 13:22 ` Sean Nyekjaer
2019-09-15 13:35 ` Jonathan Cameron
2019-09-16 9:02 ` [RFC PATCH] iio: imu: st_lsm6dsx: filter motion events in driver Sean Nyekjaer
2019-09-16 9:16 ` Lorenzo Bianconi
2019-09-16 11:29 ` Sean Nyekjaer
2019-09-16 11:55 ` Lorenzo Bianconi
2019-09-16 12:09 ` Sean Nyekjaer
2019-09-16 12:22 ` Lorenzo Bianconi
2019-09-15 13:41 ` [PATCH v8 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190915133040.0953ef1a@archlinux \
--to=jic23@kernel.org \
--cc=armando.visconti@st.com \
--cc=denis.ciocca@st.com \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi83@gmail.com \
--cc=mario.tesi@st.com \
--cc=martin@geanix.com \
--cc=sean@geanix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).