> This add ways for the SoC to wake from accelerometer wake events.
> 
> In the suspend function we skip disabling the sensor if wakeup-source
> and events are activated.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> ---
> Changes since v4:
>  * More devices supports wakeup
> 
> Changes since v5:
>  * None
> 
> Changes since v6:
>  * None
> 
> Changes since v7:
>  * Add check for hw->enable_event
>  * Moved disable_irq_wake section so it's called
>  * Removed not neeeded continue from disable_irq_wake section
> 
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 4198ba263d03..810807c52d5f 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -1858,6 +1858,9 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  			return err;
>  	}
>  
> +	if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
> +		device_init_wakeup(dev, true);
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL(st_lsm6dsx_probe);
> @@ -1876,6 +1879,13 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
>  		if (!(hw->enable_mask & BIT(sensor->id)))
>  			continue;
>  
> +		if (device_may_wakeup(dev) && i == ST_LSM6DSX_ID_ACC &&

since you have to send v9...better to use sensor->id instead of i here


> +		    hw->enable_event) {
> +			/* Enable wake from IRQ */
> +			enable_irq_wake(hw->irq);
> +			continue;
> +		}
> +
>  		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
>  		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
>  		    sensor->id == ST_LSM6DSX_ID_EXT2)
> @@ -1904,6 +1914,10 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
>  		if (!hw->iio_devs[i])
>  			continue;
>  
> +		if (device_may_wakeup(dev) && i == ST_LSM6DSX_ID_ACC &&
> +		    hw->enable_event)
> +			disable_irq_wake(hw->irq);
> +
>  		sensor = iio_priv(hw->iio_devs[i]);
>  		if (!(hw->suspend_mask & BIT(sensor->id)))
>  			continue;
> -- 
> 2.23.0
>