From: Alexandru Lazar <alazar@startmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
robh+dt@kernel.org, mark.rutland@arm.com,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: Re: [PATCH v5 2/2] iio: adc: Add MAX1241 driver
Date: Sat, 28 Mar 2020 16:17:46 +0200 [thread overview]
Message-ID: <20200328141746.GA9793@leena.republic> (raw)
In-Reply-To: <20200328133434.0f99dc93@archlinux>
> Minor issue inline. I can fix that up when applying.
> However, I'd like to give more time for Rob to take a look at the
> dt binding. I've made too many mistakes on those recently :(
Ooh, yes! Right! Sorry, my brain is still not wired correctly for these
fancy new callback thingies.
It's actually less minor than it looks because disable_reg_action
actually tries to turn *both* regulators off. No way that's gonna go
well, and I'm not sure why I my alarm didn't go off when I tested the
damn thing, either.
I'll fix it on Monday and post a v6, don't worry about it, you've got a
whole tree to tend to. We got plenty of time anyway (and, like I said,
I'm really in no rush at all :-) ).
Thanks,
Alex
>
> Reality is we've missed the coming merge window with this anyway
> so we have plenty of time.
>
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/iio/adc/Kconfig | 10 ++
> > drivers/iio/adc/Makefile | 1 +
> > drivers/iio/adc/max1241.c | 213 ++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 224 insertions(+)
> > create mode 100644 drivers/iio/adc/max1241.c
> >
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index 5d8540b7b427..55f6462cd93f 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -566,6 +566,16 @@ config MAX1118
> > To compile this driver as a module, choose M here: the module will be
> > called max1118.
> >
> > +config MAX1241
> > + tristate "Maxim max1241 ADC driver"
> > + depends on SPI_MASTER
> > + help
> > + Say yes here to build support for Maxim max1241 12-bit, single-channel
> > + ADC.
> > +
> > + To compile this driver as a module, choose M here: the module will be
> > + called max1241.
> > +
> > config MAX1363
> > tristate "Maxim max1363 ADC driver"
> > depends on I2C
> > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > index a1f1fbec0f87..37d6f17559dc 100644
> > --- a/drivers/iio/adc/Makefile
> > +++ b/drivers/iio/adc/Makefile
> > @@ -54,6 +54,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o
> > obj-$(CONFIG_MAX1027) += max1027.o
> > obj-$(CONFIG_MAX11100) += max11100.o
> > obj-$(CONFIG_MAX1118) += max1118.o
> > +obj-$(CONFIG_MAX1241) += max1241.o
> > obj-$(CONFIG_MAX1363) += max1363.o
> > obj-$(CONFIG_MAX9611) += max9611.o
> > obj-$(CONFIG_MCP320X) += mcp320x.o
> > diff --git a/drivers/iio/adc/max1241.c b/drivers/iio/adc/max1241.c
> > new file mode 100644
> > index 000000000000..33ea61305f27
> > --- /dev/null
> > +++ b/drivers/iio/adc/max1241.c
> > @@ -0,0 +1,213 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * MAX1241 low-power, 12-bit serial ADC
> > + *
> > + * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/module.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/spi/spi.h>
> > +
> > +#define MAX1241_VAL_MASK GENMASK(11, 0)
> > +#define MAX1241_SHDN_DELAY_USEC 4
> > +
> > +enum max1241_id {
> > + max1241,
> > +};
> > +
> > +struct max1241 {
> > + struct spi_device *spi;
> > + struct mutex lock;
> > + struct regulator *vdd;
> > + struct regulator *vref;
> > + struct gpio_desc *shdn;
> > +
> > + __be16 data ____cacheline_aligned;
> > +};
> > +
> > +static const struct iio_chan_spec max1241_channels[] = {
> > + {
> > + .type = IIO_VOLTAGE,
> > + .indexed = 1,
> > + .channel = 0,
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE),
> > + },
> > +};
> > +
> > +static int max1241_read(struct max1241 *adc)
> > +{
> > + struct spi_transfer xfers[] = {
> > + /*
> > + * Begin conversion by bringing /CS low for at least
> > + * tconv us.
> > + */
> > + {
> > + .len = 0,
> > + .delay.value = 8,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > + },
> > + /*
> > + * Then read two bytes of data in our RX buffer.
> > + */
> > + {
> > + .rx_buf = &adc->data,
> > + .len = 2,
> > + },
> > + };
> > +
> > + return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
> > +}
> > +
> > +static int max1241_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val, int *val2, long mask)
> > +{
> > + int ret, vref_uV;
> > + struct max1241 *adc = iio_priv(indio_dev);
> > +
> > + switch (mask) {
> > + case IIO_CHAN_INFO_RAW:
> > + mutex_lock(&adc->lock);
> > +
> > + if (adc->shdn) {
> > + gpiod_set_value(adc->shdn, 0);
> > + udelay(MAX1241_SHDN_DELAY_USEC);
> > + ret = max1241_read(adc);
> > + gpiod_set_value(adc->shdn, 1);
> > + } else
> > + ret = max1241_read(adc);
> > +
> > + if (ret) {
> > + mutex_unlock(&adc->lock);
> > + return ret;
> > + }
> > +
> > + *val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
> > +
> > + mutex_unlock(&adc->lock);
> > + return IIO_VAL_INT;
> > + case IIO_CHAN_INFO_SCALE:
> > + vref_uV = regulator_get_voltage(adc->vref);
> > +
> > + if (vref_uV < 0)
> > + return vref_uV;
> > +
> > + *val = vref_uV / 1000;
> > + *val2 = 12;
> > +
> > + return IIO_VAL_FRACTIONAL_LOG2;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static const struct iio_info max1241_info = {
> > + .read_raw = max1241_read_raw,
> > +};
> > +
> > +static void max1241_disable_reg_action(void *data)
> > +{
> > + struct max1241 *adc = data;
> > + struct device *dev = &adc->spi->dev;
> > + int err;
> > +
> > + err = regulator_disable(adc->vref);
> > + if (err)
> > + dev_err(dev, "could not disable vref regulator.\n");
> > +
> > + err = regulator_disable(adc->vdd);
> > + if (err)
> > + dev_err(dev, "could not disable vdd regulator.\n");
> > +}
> > +
> > +static int max1241_probe(struct spi_device *spi)
> > +{
> > + struct device *dev = &spi->dev;
> > + struct iio_dev *indio_dev;
> > + struct max1241 *adc;
> > + int ret;
> > +
> > + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + adc = iio_priv(indio_dev);
> > + adc->spi = spi;
> > + mutex_init(&adc->lock);
> > +
> > + spi_set_drvdata(spi, indio_dev);
> > +
> > + adc->vdd = devm_regulator_get(dev, "vdd");
> > + if (IS_ERR(adc->vdd)) {
> > + dev_err(dev, "failed to get vdd regulator\n");
> > + return PTR_ERR(adc->vdd);
> > + }
> > +
> > + ret = regulator_enable(adc->vdd);
> > + if (ret)
> > + return ret;
> > +
> > + adc->vref = devm_regulator_get(dev, "vref");
> > + if (IS_ERR(adc->vref)) {
>
> If this returns an error you have left the vref regulator on.
>
> Unfortunately to keep things simple you'll need to have two
> separate callbacks for devm_add_action_or_reset, one for each
> of the regulators.
>
> > + dev_err(dev, "failed to get vref regulator\n");
> > + return PTR_ERR(adc->vref);
> > + }
> > +
> > + ret = regulator_enable(adc->vref);
> > + if (ret)
> > + return ret;
> > +
> > + ret = devm_add_action_or_reset(dev, max1241_disable_reg_action, adc);
> > + if (ret) {
> > + dev_err(dev, "could not set up regulator cleanup action!\n");
> > + return ret;
> > + }
> > +
> > + adc->shdn = devm_gpiod_get_optional(dev, "shdn", GPIOD_OUT_HIGH);
> > + if (IS_ERR(adc->shdn))
> > + return PTR_ERR(adc->shdn);
> > +
> > + if (adc->shdn)
> > + dev_dbg(dev, "shdn pin passed, low-power mode enabled");
> > + else
> > + dev_dbg(dev, "no shdn pin passed, low-power mode disabled");
> > +
> > + indio_dev->name = spi_get_device_id(spi)->name;
> > + indio_dev->dev.parent = dev;
> > + indio_dev->info = &max1241_info;
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > + indio_dev->channels = max1241_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
> > +
> > + return devm_iio_device_register(dev, indio_dev);
> > +}
> > +
> > +static const struct spi_device_id max1241_id[] = {
> > + { "max1241", max1241 },
> > + {}
> > +};
> > +
> > +static const struct of_device_id max1241_dt_ids[] = {
> > + { .compatible = "maxim,max1241" },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, max1241_dt_ids);
> > +
> > +static struct spi_driver max1241_spi_driver = {
> > + .driver = {
> > + .name = "max1241",
> > + .of_match_table = max1241_dt_ids,
> > + },
> > + .probe = max1241_probe,
> > + .id_table = max1241_id,
> > +};
> > +module_spi_driver(max1241_spi_driver);
> > +
> > +MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
> > +MODULE_DESCRIPTION("MAX1241 ADC driver");
> > +MODULE_LICENSE("GPL v2");
>
next prev parent reply other threads:[~2020-03-28 14:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-22 14:02 [PATCH v5 0/2] Maxim MAX1241 driver Alexandru Lazar
2020-03-22 14:02 ` [PATCH v5 1/2] dt-bindings: iio: adc: Add MAX1241 bindings Alexandru Lazar
2020-03-22 14:02 ` [PATCH v5 2/2] iio: adc: Add MAX1241 driver Alexandru Lazar
2020-03-28 13:34 ` Jonathan Cameron
2020-03-28 14:17 ` Alexandru Lazar [this message]
2020-03-27 13:40 ` [PATCH v5 0/2] Maxim " Alexandru Lazar
2020-03-27 14:08 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200328141746.GA9793@leena.republic \
--to=alazar@startmail.com \
--cc=alexandru.ardelean@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).