From: Rob Herring <robh@kernel.org>
To: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: jic23@kernel.org, mchehab+huawei@kernel.org, davem@davemloft.net,
gregkh@linuxfoundation.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 11/12] dt-bindings: iio: imu: Add inv_icm42600 documentation
Date: Thu, 14 May 2020 22:00:02 -0500 [thread overview]
Message-ID: <20200515030002.GA6242@bogus> (raw)
In-Reply-To: <20200507144222.20989-12-jmaneyrol@invensense.com>
On Thu, May 07, 2020 at 04:42:21PM +0200, Jean-Baptiste Maneyrol wrote:
> Document the ICM-426xxx devices devicetree bindings.
>
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
> ---
> .../bindings/iio/imu/invensense,icm42600.yaml | 90 +++++++++++++++++++
> 1 file changed, 90 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> new file mode 100644
> index 000000000000..a7175f6543fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: InvenSense ICM-426xx Inertial Measurement Unit
> +
> +maintainers:
> + - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
> +
> +description: |
> + 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer.
> +
> + It has a configurable host interface that supports I3C, I2C and SPI serial communication, features a 2kB FIFO and
> + 2 programmable interrupts with ultra-low-power wake-on-motion support to minimize system power consumption.
> +
> + Other industry-leading features include InvenSense on-chip APEX Motion Processing engine for gesture recognition,
> + activity classification, and pedometer, along with programmable digital filters, and an embedded temperature sensor.
> +
> + https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - invensense,icm42600
> + - invensense,icm42602
> + - invensense,icm42605
> + - invensense,icm42622
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + spi-cpha: true
> +
> + spi-cpol: true
It doesn't make much sense to specify these and not make them required.
I guess you could have a device with multiple modes, but generally
there's only one right combination of these properties. Also, this could
just be implied by the compatible.
> +
> + spi-max-frequency:
> + maxItems: 1
Not an array. Either give a frequency range (minimum/maximum) or just
'true'.
> +
> + vdd-supply:
> + description: Regulator that provides power to the sensor
> +
> + vddio-supply:
> + description: Regulator that provides power to the bus
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + icm42605@68 {
> + compatible = "invensense,icm42605";
> + reg = <0x68>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> + vdd-supply = <&vdd>;
> + vddio-supply = <&vddio>;
> + };
> + };
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + icm42602@0 {
> + compatible = "invensense,icm42602";
> + reg = <0>;
> + spi-max-frequency = <24000000>;
> + spi-cpha;
> + spi-cpol;
> + interrupt-parent = <&gpio1>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> + vdd-supply = <&vdd>;
> + vddio-supply = <&vddio>;
> + };
> + };
> --
> 2.17.1
>
next prev parent reply other threads:[~2020-05-15 3:00 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-07 14:42 [PATCH 00/12] iio: imu: new inv_icm42600 driver Jean-Baptiste Maneyrol
2020-05-07 14:42 ` [PATCH 01/12] iio: imu: inv_icm42600: add core of " Jean-Baptiste Maneyrol
2020-05-08 13:28 ` Jonathan Cameron
2020-05-18 14:14 ` Jean-Baptiste Maneyrol
2020-05-21 17:47 ` Jonathan Cameron
2020-05-07 14:42 ` [PATCH 02/12] iio: imu: inv_icm42600: add I2C driver for " Jean-Baptiste Maneyrol
2020-05-08 13:44 ` Jonathan Cameron
2020-05-18 14:19 ` Jean-Baptiste Maneyrol
2020-05-21 17:50 ` Jonathan Cameron
2020-05-07 14:42 ` [PATCH 03/12] iio: imu: inv_icm42600: add SPI " Jean-Baptiste Maneyrol
2020-05-07 14:42 ` [PATCH 04/12] iio: imu: inv_icm42600: add gyroscope IIO device Jean-Baptiste Maneyrol
2020-05-08 14:01 ` Jonathan Cameron
[not found] ` <MN2PR12MB4422B32CB3C4BFD0AF5FFF3CC4B80@MN2PR12MB4422.namprd12.prod.outlook.com>
2020-05-18 15:33 ` Jean-Baptiste Maneyrol
2020-05-21 17:55 ` Jonathan Cameron
2020-05-07 14:42 ` [PATCH 05/12] iio: imu: inv_icm42600: add accelerometer " Jean-Baptiste Maneyrol
2020-05-07 14:42 ` [PATCH 06/12] iio: imu: inv_icm42600: add temperature sensor support Jean-Baptiste Maneyrol
2020-05-07 14:42 ` [PATCH 07/12] iio: imu: add Kconfig and Makefile for inv_icm42600 driver Jean-Baptiste Maneyrol
2020-05-07 14:42 ` [PATCH 08/12] iio: imu: inv_icm42600: add device interrupt trigger Jean-Baptiste Maneyrol
2020-05-08 14:22 ` Jonathan Cameron
2020-05-18 15:41 ` Jean-Baptiste Maneyrol
2020-05-07 14:42 ` [PATCH 09/12] iio: imu: inv_icm42600: add buffer support in iio devices Jean-Baptiste Maneyrol
2020-05-08 14:19 ` Jonathan Cameron
2020-05-18 15:32 ` Jean-Baptiste Maneyrol
2020-05-21 17:56 ` Jonathan Cameron
2020-05-07 14:42 ` [PATCH 10/12] iio: imu: inv_icm42600: add accurate timestamping Jean-Baptiste Maneyrol
2020-05-08 14:42 ` Jonathan Cameron
2020-05-18 15:48 ` Jean-Baptiste Maneyrol
2020-05-07 14:42 ` [PATCH 11/12] dt-bindings: iio: imu: Add inv_icm42600 documentation Jean-Baptiste Maneyrol
2020-05-15 3:00 ` Rob Herring [this message]
2020-05-07 14:42 ` [PATCH 12/12] MAINTAINERS: add entry for inv_icm42600 6-axis imu sensor Jean-Baptiste Maneyrol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200515030002.GA6242@bogus \
--to=robh@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).