linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Cc: linux-kernel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht, daniel.baluta@nxp.com,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS), Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	linux-iio@vger.kernel.org (open list:IIO SUBSYSTEM AND DRIVERS),
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Subject: Re: [PATCH v3 5/5] iio: imu: bmi160: added mount-matrix support
Date: Sun, 24 May 2020 12:43:55 +0100	[thread overview]
Message-ID: <20200524124355.526af9d9@archlinux> (raw)
In-Reply-To: <20200520194656.16218-6-jonathan.albrieux@gmail.com>

On Wed, 20 May 2020 21:46:44 +0200
Jonathan Albrieux <jonathan.albrieux@gmail.com> wrote:

> Add mount-matrix binding support. As chip could have different orientations
> a mount matrix support is needed to correctly translate these differences.
> 
> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>

Other than those bits for the binding doc, the rest of the series
looks good to me.   Given timing this will only go into mainline in the
next cycle now anyway so we have plenty of time to tidy up the corners.

Thanks,

Jonathan

> ---
>  drivers/iio/imu/bmi160/bmi160.h      |  1 +
>  drivers/iio/imu/bmi160/bmi160_core.c | 20 ++++++++++++++++++++
>  2 files changed, 21 insertions(+)
> 
> diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h
> index 923c3b274fde..a82e040bd109 100644
> --- a/drivers/iio/imu/bmi160/bmi160.h
> +++ b/drivers/iio/imu/bmi160/bmi160.h
> @@ -9,6 +9,7 @@ struct bmi160_data {
>  	struct regmap *regmap;
>  	struct iio_trigger *trig;
>  	struct regulator_bulk_data supplies[2];
> +	struct iio_mount_matrix orientation;
>  };
>  
>  extern const struct regmap_config bmi160_regmap_config;
> diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
> index d3316ca02fbd..26d586daee26 100644
> --- a/drivers/iio/imu/bmi160/bmi160_core.c
> +++ b/drivers/iio/imu/bmi160/bmi160_core.c
> @@ -110,6 +110,7 @@
>  		.storagebits = 16,				\
>  		.endianness = IIO_LE,				\
>  	},							\
> +	.ext_info = bmi160_ext_info,				\
>  }
>  
>  /* scan indexes follow DATA register order */
> @@ -265,6 +266,20 @@ static const struct  bmi160_odr_item bmi160_odr_table[] = {
>  	},
>  };
>  
> +static const struct iio_mount_matrix *
> +bmi160_get_mount_matrix(const struct iio_dev *indio_dev,
> +			const struct iio_chan_spec *chan)
> +{
> +	struct bmi160_data *data = iio_priv(indio_dev);
> +
> +	return &data->orientation;
> +}
> +
> +static const struct iio_chan_spec_ext_info bmi160_ext_info[] = {
> +	IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmi160_get_mount_matrix),
> +	{ }
> +};
> +
>  static const struct iio_chan_spec bmi160_channels[] = {
>  	BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X),
>  	BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y),
> @@ -839,6 +854,11 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
>  		return ret;
>  	}
>  
> +	ret = iio_read_mount_matrix(dev, "mount-matrix",
> +				    &data->orientation);
> +	if (ret)
> +		return ret;
> +
>  	ret = bmi160_chip_init(data, use_spi);
>  	if (ret)
>  		return ret;


      reply	other threads:[~2020-05-24 11:44 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-20 19:46 [PATCH v3 0/5] iio: imu: bmi160: added regulator and mount-matrix support Jonathan Albrieux
2020-05-20 19:46 ` [PATCH v3 1/5] dt-bindings: iio: imu: bmi160: convert txt format to yaml Jonathan Albrieux
2020-05-24 11:41   ` Jonathan Cameron
2020-05-25  7:27     ` Jonathan Albrieux
2020-05-20 19:46 ` [PATCH v3 2/5] dt-bindings: iio: imu: bmi160: add regulators and mount-matrix Jonathan Albrieux
2020-05-20 19:46 ` [PATCH v3 3/5] iio: imu: bmi160: fix typo Jonathan Albrieux
2020-05-20 19:46 ` [PATCH v3 4/5] iio: imu: bmi160: added regulator support Jonathan Albrieux
2020-05-20 19:46 ` [PATCH v3 5/5] iio: imu: bmi160: added mount-matrix support Jonathan Albrieux
2020-05-24 11:43   ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200524124355.526af9d9@archlinux \
    --to=jic23@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathan.albrieux@gmail.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).