From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lars@metafoo.de>
Subject: Re: [RFC PATCH 09/14] iio: buffer: split buffer sysfs creation to take buffer as primary arg
Date: Sun, 24 May 2020 17:49:16 +0100 [thread overview]
Message-ID: <20200524174916.2ff91965@archlinux> (raw)
In-Reply-To: <20200508135348.15229-10-alexandru.ardelean@analog.com>
On Fri, 8 May 2020 16:53:43 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> Currently the iio_buffer_{alloc,free}_sysfs_and_mask() take 'indio_dev' as
> primary argument. This change converts to take an IIO buffer as a primary
> argument.
>
> That will allow the functions to get called for multiple buffers.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Looks good to me. We'll need this whatever the interface ends up being as
need the separate control infrastructure.
Jonathan
> ---
> drivers/iio/industrialio-buffer.c | 46 ++++++++++++++++++++-----------
> 1 file changed, 30 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
> index e7a847e7b103..6b1b5d5387bd 100644
> --- a/drivers/iio/industrialio-buffer.c
> +++ b/drivers/iio/industrialio-buffer.c
> @@ -1312,26 +1312,14 @@ static struct attribute *iio_buffer_attrs[] = {
> &dev_attr_data_available.attr,
> };
>
> -int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
> +static int __iio_buffer_alloc_sysfs_and_mask(struct iio_buffer *buffer)
> {
> + struct iio_dev *indio_dev = buffer->indio_dev;
> struct iio_dev_attr *p;
> struct attribute **attr;
> - struct iio_buffer *buffer = indio_dev->buffer;
> int ret, i, attrn, attrcount, attrcount_orig = 0;
> const struct iio_chan_spec *channels;
>
> - channels = indio_dev->channels;
> - if (channels) {
> - int ml = indio_dev->masklength;
> -
> - for (i = 0; i < indio_dev->num_channels; i++)
> - ml = max(ml, channels[i].scan_index + 1);
> - indio_dev->masklength = ml;
> - }
> -
> - if (!buffer)
> - return 0;
> -
> attrcount = 0;
> if (buffer->attrs) {
> while (buffer->attrs[attrcount] != NULL)
> @@ -1411,19 +1399,45 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
> return ret;
> }
>
> -void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev)
> +int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
> {
> struct iio_buffer *buffer = indio_dev->buffer;
> + const struct iio_chan_spec *channels;
> + int i;
> +
> + channels = indio_dev->channels;
> + if (channels) {
> + int ml = indio_dev->masklength;
> +
> + for (i = 0; i < indio_dev->num_channels; i++)
> + ml = max(ml, channels[i].scan_index + 1);
> + indio_dev->masklength = ml;
> + }
>
> if (!buffer)
> - return;
> + return 0;
> +
> + return __iio_buffer_alloc_sysfs_and_mask(buffer);
> +}
>
> +static void __iio_buffer_free_sysfs_and_mask(struct iio_buffer *buffer)
> +{
> iio_buffer_free_scanmask(buffer);
> kfree(buffer->buffer_group.attrs);
> kfree(buffer->scan_el_group.attrs);
> iio_free_chan_devattr_list(&buffer->scan_el_dev_attr_list);
> }
>
> +void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev)
> +{
> + struct iio_buffer *buffer = indio_dev->buffer;
> +
> + if (!buffer)
> + return;
> +
> + __iio_buffer_free_sysfs_and_mask(buffer);
> +}
> +
> static const struct file_operations iio_buffer_fileops = {
> .read = iio_buffer_read_outer,
> .release = iio_buffer_chrdev_release,
next prev parent reply other threads:[~2020-05-24 16:49 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 13:53 [RFC PATCH 00/14] iio: buffer: add support for multiple buffers Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 01/14] iio: Move scan mask management to the core Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 02/14] iio: hw_consumer: use new scanmask functions Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 03/14] iio: buffer: add back-ref from iio_buffer to iio_dev Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 04/14] iio: core,buffer: wrap iio_buffer_put() call into iio_buffers_put() Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 05/14] iio: core: register chardev only if needed Alexandru Ardelean
2020-05-24 16:40 ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 06/14] iio: buffer,event: duplicate chardev creation for buffers & events Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 07/14] iio: core: add simple centralized mechanism for ioctl() handlers Alexandru Ardelean
2020-05-24 16:45 ` Jonathan Cameron
2020-05-25 7:24 ` Ardelean, Alexandru
2020-05-08 13:53 ` [RFC PATCH 08/14] iio: core: use new common ioctl() mechanism Alexandru Ardelean
2020-05-24 16:47 ` Jonathan Cameron
2020-05-25 7:27 ` Ardelean, Alexandru
2020-05-31 15:20 ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 09/14] iio: buffer: split buffer sysfs creation to take buffer as primary arg Alexandru Ardelean
2020-05-24 16:49 ` Jonathan Cameron [this message]
2020-05-25 7:28 ` Ardelean, Alexandru
2020-05-31 15:21 ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 10/14] iio: buffer: remove attrcount_orig var from sysfs creation Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 11/14] iio: buffer: add underlying device object and convert buffers to devices Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 12/14] iio: buffer: symlink the scan_elements dir back into IIO device's dir Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 13/14] iio: unpack all iio buffer attributes correctly Alexandru Ardelean
2020-05-24 17:28 ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 14/14] iio: buffer: convert single buffer to list of buffers Alexandru Ardelean
2020-05-09 8:52 ` [RFC PATCH 00/14] iio: buffer: add support for multiple buffers Lars-Peter Clausen
2020-05-10 10:09 ` Jonathan Cameron
2020-05-11 10:33 ` Ardelean, Alexandru
2020-05-11 10:37 ` Lars-Peter Clausen
2020-05-11 13:03 ` Ardelean, Alexandru
2020-05-11 13:24 ` Ardelean, Alexandru
2020-05-11 13:58 ` Lars-Peter Clausen
2020-05-11 14:56 ` Ardelean, Alexandru
2020-05-11 19:56 ` Lars-Peter Clausen
2020-05-12 6:26 ` Ardelean, Alexandru
2020-05-16 13:08 ` Ardelean, Alexandru
2020-05-16 16:24 ` Jonathan Cameron
2020-05-17 6:26 ` Ardelean, Alexandru
2020-05-17 13:40 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200524174916.2ff91965@archlinux \
--to=jic23@kernel.org \
--cc=alexandru.ardelean@analog.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).