From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org, Rob Herring <robh+dt@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Subject: [PATCH 27/29] dt-bindings:iio:temperature:maxim,max31856 yaml conversion.
Date: Sun, 11 Oct 2020 18:07:47 +0100 [thread overview]
Message-ID: <20201011170749.243680-28-jic23@kernel.org> (raw)
In-Reply-To: <20201011170749.243680-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simple txt to yaml conversion of this binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
---
.../bindings/iio/temperature/max31856.txt | 24 ---------
.../iio/temperature/maxim,max31856.yaml | 54 +++++++++++++++++++
2 files changed, 54 insertions(+), 24 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/temperature/max31856.txt b/Documentation/devicetree/bindings/iio/temperature/max31856.txt
deleted file mode 100644
index 06ab43bb4de8..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/max31856.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Maxim MAX31856 thermocouple support
-
-https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf
-
-Optional property:
- - thermocouple-type: Type of thermocouple (THERMOCOUPLE_TYPE_K if
- omitted). Supported types are B, E, J, K, N, R, S, T.
-
-Required properties:
- - compatible: must be "maxim,max31856"
- - reg: SPI chip select number for the device
- - spi-max-frequency: As per datasheet max. supported freq is 5000000
- - spi-cpha: must be defined for max31856 to enable SPI mode 1
-
- Refer to spi/spi-bus.txt for generic SPI slave bindings.
-
- Example:
- temp-sensor@0 {
- compatible = "maxim,max31856";
- reg = <0>;
- spi-max-frequency = <5000000>;
- spi-cpha;
- thermocouple-type = <THERMOCOUPLE_TYPE_K>;
- };
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
new file mode 100644
index 000000000000..41998070f675
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31856 thermocouple support
+
+maintainers:
+ - Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
+
+description: |
+ https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf
+
+properties:
+ compatible:
+ const: maxim,max31856
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency: true
+ spi-cpha: true
+
+ thermocouple-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted).
+ Use defines in dt-bindings/iio/temperature/thermocouple.h.
+ Supported types are B, E, J, K, N, R, S, T.
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/iio/temperature/thermocouple.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temp-sensor@0 {
+ compatible = "maxim,max31856";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+ };
+ };
+...
--
2.28.0
next prev parent reply other threads:[~2020-10-11 17:10 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-11 17:07 [PATCH 00/29] dt-bindings:iio: Another set of yaml conversions Jonathan Cameron
2020-10-11 17:07 ` [PATCH 01/29] dt-bindings:iio:humidity:hdc100x Drop separate doc + add to trivial-devices Jonathan Cameron
2020-10-12 16:29 ` Matt Ranostay
2020-10-11 17:07 ` [PATCH 02/29] dt-bindings:iio:humidity:htu21 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 03/29] dt-bindings:iio:humidity:st,hts221 yaml conversion Jonathan Cameron
2020-10-11 17:07 ` [PATCH 04/29] dt-bindings:iio:humidity:dht11 " Jonathan Cameron
2020-10-11 17:52 ` Harald Geyer
2020-10-12 14:29 ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 05/29] dt-bindings:iio:pressure:ms5637 Drop separate doc + add to trivial-devices Jonathan Cameron
2020-10-11 17:07 ` [PATCH 06/29] dt-bindings:iio:pressure:murata,zpa2326 yaml conversion Jonathan Cameron
2020-10-11 17:07 ` [PATCH 07/29] dt-bindings:iio:pressure:meas,ms5611 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 08/29] dt-bindings:iio:pressure:hoperf,hp03 " Jonathan Cameron
2020-10-12 13:06 ` Rob Herring
2020-10-12 14:31 ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 09/29] dt-bindings:iio:proximity:semtech,sx9500 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 10/29] dt-bindings:iio:proximity:st,vl53l0x " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 11/29] dt-bindings:iio:proximity:ams,as3935 " Jonathan Cameron
2020-10-12 16:37 ` Matt Ranostay
2020-10-11 17:07 ` [PATCH 12/29] dt-bindings:iio:dac:ti,dac5571 " Jonathan Cameron
2020-10-11 17:47 ` Sean Nyekjaer
2020-10-18 9:58 ` Jonathan Cameron
2020-10-18 15:06 ` Sean Nyekjaer
2020-10-11 17:07 ` [PATCH 13/29] dt-bindings:iio:dac:ti,dac7311 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 14/29] dt-bindings:iio:dac:ti,dac7512 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 15/29] dt-bindings:iio:dac:ti,dac7612 " Jonathan Cameron
2020-10-15 8:49 ` Ricardo Ribalda Delgado
2020-10-18 17:41 ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 16/29] dt-bindings:iio:dac:ti,dac082s085 " Jonathan Cameron
2020-10-28 20:31 ` Lukas Wunner
2020-10-29 15:50 ` Jonathan Cameron
2020-10-29 19:10 ` Lukas Wunner
2020-10-31 11:02 ` Jonathan Cameron
2020-10-31 13:07 ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 17/29] dt-bindings:iio:dac:adi,ad7303 " Jonathan Cameron
2020-10-11 17:13 ` Lars-Peter Clausen
2020-10-18 17:43 ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 18/29] dt-bindings:iio:dac:maxim,ds4424 " Jonathan Cameron
2020-10-18 17:47 ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 19/29] dt-bindings:iio:dac:fsl,vf610-dac " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 20/29] dt-bindings:iio:dac:microchip,mcp4725 " Jonathan Cameron
2020-10-12 14:02 ` Tomas Novotny
2020-10-12 14:39 ` Jonathan Cameron
2020-10-14 8:57 ` Tomas Novotny
2020-10-11 17:07 ` [PATCH 21/29] dt-bindings:iio:dac:maxim,max5821 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 22/29] dt-bindings:iio:dac:nxp,lpc1850-dac " Jonathan Cameron
2020-10-18 17:52 ` Jonathan Cameron
2020-10-18 18:44 ` Vladimir Zapolskiy
2020-10-11 17:07 ` [PATCH 23/29] dt-bindings:iio:dac:adi,ad5758 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 24/29] dt-bindings:iio:temperature:melexis,mlx90614 " Jonathan Cameron
2020-10-11 21:00 ` Crt Mori
2020-10-12 8:00 ` Crt Mori
2020-10-12 14:25 ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 25/29] dt-bindings:iio:temperature:melexis,mlx90632 conversion to yaml Jonathan Cameron
2020-10-11 21:01 ` Crt Mori
2020-10-11 17:07 ` [PATCH 26/29] dt-bindings:iio:temperature:meas,tsys01 move to trivial-devices.yaml Jonathan Cameron
2020-10-11 17:07 ` Jonathan Cameron [this message]
2020-10-11 17:07 ` [PATCH 28/29] dt-bindings:iio:temperature:maxim_thermocouple.txt to maxim,max31855k.yaml Jonathan Cameron
2020-10-12 16:40 ` Matt Ranostay
2020-10-11 17:07 ` [PATCH 29/29] dt-bindings:iio:temperature:ti,tmp07 yaml conversion Jonathan Cameron
2020-10-13 8:22 ` Manivannan Sadhasivam
2020-10-12 13:20 ` [PATCH 00/29] dt-bindings:iio: Another set of yaml conversions Rob Herring
2020-10-12 14:33 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201011170749.243680-28-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=linux-iio@vger.kernel.org \
--cc=paresh.chaudhary@rockwellcollins.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).