From: Jonathan Cameron <jic23@kernel.org>
To: Mike Looijmans <mike.looijmans@topic.nl>
Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings
Date: Sat, 23 Jan 2021 15:38:26 +0000 [thread overview]
Message-ID: <20210123153826.0368bf61@archlinux> (raw)
In-Reply-To: <20210121155700.9267-1-mike.looijmans@topic.nl>
On Thu, 21 Jan 2021 16:56:58 +0100
Mike Looijmans <mike.looijmans@topic.nl> wrote:
> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Just the issue the build bot found. Otherwise looks good to me.
Jonathan
>
> ---
>
> Changes in v7:
> Add additionalProperties
> Change bmi088_accel to bmi088-accel
> Add interrupt-names and adjust description
>
> Changes in v6:
> I't been almost a year since the last commit, sorry...
> Fixed the yaml errors
> Add interrupt, vdd and vddio properties
>
> Changes in v5:
> submit together with driver code as patch series
>
> Changes in v2:
> convert to yaml format
>
> .../bindings/iio/accel/bosch,bmi088.yaml | 66 +++++++++++++++++++
> 1 file changed, 66 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> new file mode 100644
> index 000000000000..db5dbaf80fa2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMI088 IMU accelerometer part
> +
> +maintainers:
> + - Mike Looijmans <mike.looijmans@topic.nl>
> +
> +description: |
> + Acceleration part of the IMU sensor with an SPI interface
> + Specifications about the sensor can be found at:
> + https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - bosch,bmi088-accel
> +
> + reg:
> + maxItems: 1
> +
> + vdd-supply: true
> +
> + vddio-supply: true
> +
> + interrupts:
> + minItems: 1
> + maxItems: 2
> + description: |
> + Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
> + Two configurable interrupt lines exist.
> +
> + interrupt-names:
> + description: Specify which interrupt line is in use.
> + items:
> + enum:
> + - INT1
> + - INT2
> + minItems: 1
> + maxItems: 2
As per Rob's build bot you need.
spi-max-frequency: true
If that's all that comes up and Rob is happy with this I can fix that up whilst
applying. Please try to run the checks suggested in Rob's build bot message
before submitting binding patches though.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + bmi088-accel@1 {
> + compatible = "bosch,bmi088-accel";
> + reg = <1>;
> + spi-max-frequency = <10000000>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "INT2";
> + };
> + };
> +...
next prev parent reply other threads:[~2021-01-23 15:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 15:56 [PATCH v7 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings Mike Looijmans
2021-01-21 15:56 ` [PATCH v7 2/2] iio: accel: Add support for the Bosch-Sensortec BMI088 Mike Looijmans
2021-01-23 15:49 ` Jonathan Cameron
2021-01-22 14:00 ` [PATCH v7 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings Rob Herring
2021-01-23 15:38 ` Jonathan Cameron [this message]
[not found] ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.31062d28-ea32-4cba-9e19-a7434c115d8e@emailsignatures365.codetwo.com>
[not found] ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.0d2bd5fa-15cc-4b27-b94e-83614f9e5b38.19976ff0-2a49-43f4-afd2-1dfd0965f697@emailsignatures365.codetwo.com>
2021-01-25 7:53 ` Mike Looijmans
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210123153826.0368bf61@archlinux \
--to=jic23@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.looijmans@topic.nl \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).