From: Guoqing Chi <chi962464zy@163.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Tom Rix <trix@redhat.com>,
martin.blumenstingl@googlemail.com, linux-kernel@vger.kernel.org,
chiguoqing@yulong.com, huyue2@yulong.com, zhangwen@yulong.com,
linux-iio@vger.kernel.org
Subject: Re: [PATCH v2] iio: imu: bmi160: add mutex_lock for avoiding race
Date: Tue, 26 Jan 2021 10:58:54 +0800 [thread overview]
Message-ID: <20210126105854.0000192d@163.com> (raw)
In-Reply-To: <20210123152659.563cddeb@archlinux>
On Sat, 23 Jan 2021 15:26:59 +0000
Jonathan Cameron <jic23@kernel.org> wrote:
> On Wed, 20 Jan 2021 07:06:23 -0800
> Tom Rix <trix@redhat.com> wrote:
>
> > On 1/19/21 5:48 PM, Guoqing Chi wrote:
> > > On Tue, 19 Jan 2021 06:54:45 -0800
> > > Tom Rix <trix@redhat.com> wrote:
> > >
> > >> On 1/19/21 3:22 AM, Guoqing Chi wrote:
> > >>> From: chiguoqing <chi962464zy@163.com>
> > >>>
> > >>> Adding mutex_lock, when read and write reg need to use this
> > >>> lock to avoid race.
> > >>>
> > >>> Signed-off-by: Guoqing Chi <chiguoqing@yulong.com>
> > >>> ---
> > >>> v2:Follow write function to fix read function.
> > >>> Adding mutex init in core probe function.
> > >>> Adding break in switch case at read and write function.
> > >>>
> > >>> drivers/iio/imu/bmi160/bmi160.h | 2 ++
> > >>> drivers/iio/imu/bmi160/bmi160_core.c | 34
> > >>> +++++++++++++++++++--------- 2 files changed, 25 insertions(+),
> > >>> 11 deletions(-)
> > >>>
> > >>> diff --git a/drivers/iio/imu/bmi160/bmi160.h
> > >>> b/drivers/iio/imu/bmi160/bmi160.h index
> > >>> 32c2ea2d7112..0c189a8b5b53 100644 ---
> > >>> a/drivers/iio/imu/bmi160/bmi160.h +++
> > >>> b/drivers/iio/imu/bmi160/bmi160.h @@ -3,9 +3,11 @@
> > >>> #define BMI160_H_
> > >>>
> > >>> #include <linux/iio/iio.h>
> > >>> +#include <linux/mutex.h>
> > >>> #include <linux/regulator/consumer.h>
> > >>>
> > >>> struct bmi160_data {
> > >>> + struct mutex lock;
> > >>> struct regmap *regmap;
> > >>> struct iio_trigger *trig;
> > >>> struct regulator_bulk_data supplies[2];
> > >>> diff --git a/drivers/iio/imu/bmi160/bmi160_core.c
> > >>> b/drivers/iio/imu/bmi160/bmi160_core.c index
> > >>> 290b5ef83f77..e303378f4841 100644 ---
> > >>> a/drivers/iio/imu/bmi160/bmi160_core.c +++
> > >>> b/drivers/iio/imu/bmi160/bmi160_core.c @@ -452,26 +452,32 @@
> > >>> static int bmi160_read_raw(struct iio_dev *indio_dev, int ret;
> > >>> struct bmi160_data *data = iio_priv(indio_dev);
> > >>>
> > >>> + mutex_lock(&data->lock);
> > >>> switch (mask) {
> > >>> case IIO_CHAN_INFO_RAW:
> > >>> ret = bmi160_get_data(data, chan->type,
> > >>> chan->channel2, val);
> > >>> - if (ret)
> > >>> - return ret;
> > >>> - return IIO_VAL_INT;
> > >>> + if (!ret)
> > >>> + ret = IIO_VAL_INT;
> > >>> + break;
> > >>> case IIO_CHAN_INFO_SCALE:
> > >>> *val = 0;
> > >>> ret = bmi160_get_scale(data,
> > >>> bmi160_to_sensor(chan->type),
> > >>> val2);
> > >>> - return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
> > >>> + if (!ret)
> > >>> + ret = IIO_VAL_INT_PLUS_MICRO;
> > >> Looking better, another question..
> > >>
> > >> Why does the write() function return the results directly while
> > >> the read() function
> > >>
> > >> translates them to other values ?
> > >>
> > >> Tom
> > > It is original design in this driver. In order to
> > > differentiate raw to scale and SAMP_FREQ, while the scale and
> > > SAMP_FREQ are needless. I think log information can be added for
> > > this purpose, and return results directly.
> > > It is not change the return values for my modify.It's best to
> > > keep the original design.Is that all right?
> >
> > Ok.
> >
> > Reviewed-by: Tom Rix <trix@redhat.com>
>
> Hi Guoqing Chi,
>
> For some reason the original patch email (start of this thread) never
> made it to my inbox or indeed the archive at lore.kernel.org.
>
> Please resend (picking up Tom's reviewed by) and make sure to cc
> linux-iio@vger.kernel.org + jic23@kernel.org
>
> Then check if they make it to lore.kernel.org as that should highlight
> any issues where it is getting blocked etc.
>
> Thanks,
>
> Jonathan
Hi Jonathan,
I have resend patch V2(picking up Tom's reviewed by) for add
linux-iio@vger.kernel.org + jic23@kernel.org.
Thanks.
>
> >
> > > Guoqing Chi
> > >>> + break;
> > >>> case IIO_CHAN_INFO_SAMP_FREQ:
> > >>> ret = bmi160_get_odr(data,
> > >>> bmi160_to_sensor(chan->type), val, val2);
> > >>> - return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
> > >>> + if (!ret)
> > >>> + ret = IIO_VAL_INT_PLUS_MICRO;
> > >>> + break;
> > >>> default:
> > >>> - return -EINVAL;
> > >>> + ret = -EINVAL;
> > >>> }
> > >>> + mutex_unlock(&data->lock);
> > >>>
> > >>> - return 0;
> > >>> + return ret;
> > >>> }
> > >>>
> > >>> static int bmi160_write_raw(struct iio_dev *indio_dev,
> > >>> @@ -479,19 +485,24 @@ static int bmi160_write_raw(struct iio_dev
> > >>> *indio_dev, int val, int val2, long mask)
> > >>> {
> > >>> struct bmi160_data *data = iio_priv(indio_dev);
> > >>> + int result;
> > >>>
> > >>> + mutex_lock(&data->lock);
> > >>> switch (mask) {
> > >>> case IIO_CHAN_INFO_SCALE:
> > >>> - return bmi160_set_scale(data,
> > >>> + result = bmi160_set_scale(data,
> > >>> bmi160_to_sensor(chan->type),
> > >>> val2);
> > >>> + break;
> > >>> case IIO_CHAN_INFO_SAMP_FREQ:
> > >>> - return bmi160_set_odr(data,
> > >>> bmi160_to_sensor(chan->type),
> > >>> + result = bmi160_set_odr(data,
> > >>> bmi160_to_sensor(chan->type), val, val2);
> > >>> + break;
> > >>> default:
> > >>> - return -EINVAL;
> > >>> + result = -EINVAL;
> > >>> }
> > >>> + mutex_unlock(&data->lock);
> > >>>
> > >>> - return 0;
> > >>> + return result;
> > >>> }
> > >>>
> > >>> static
> > >>> @@ -838,6 +849,7 @@ int bmi160_core_probe(struct device *dev,
> > >>> struct regmap *regmap, return -ENOMEM;
> > >>>
> > >>> data = iio_priv(indio_dev);
> > >>> + mutex_init(&data->lock);
> > >>> dev_set_drvdata(dev, indio_dev);
> > >>> data->regmap = regmap;
> > >>>
> >
prev parent reply other threads:[~2021-01-26 5:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210119112211.26404-1-chi962464zy@163.com>
2021-01-19 14:54 ` [PATCH v2] iio: imu: bmi160: add mutex_lock for avoiding race Tom Rix
2021-01-20 1:48 ` Guoqing Chi
2021-01-20 15:06 ` Tom Rix
2021-01-23 15:26 ` Jonathan Cameron
2021-01-26 2:58 ` Guoqing Chi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210126105854.0000192d@163.com \
--to=chi962464zy@163.com \
--cc=chiguoqing@yulong.com \
--cc=huyue2@yulong.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=trix@redhat.com \
--cc=zhangwen@yulong.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).