messages from 2018-08-19 17:43:09 to 2018-08-31 08:34:00 UTC [more...]
[PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
2018-08-31 8:34 UTC (40+ messages)
` [PATCH v3 01/30] mfd: Makefile: Remove build option for MFD:sun4i-gpadc
` [PATCH v3 02/30] mfd: Kconfig: Remove MFD_SUN4I_GPADC config option
` [PATCH v3 03/30] iio: adc: Remove ID table
` [PATCH v3 04/30] iio: adc: Kconfig: Update Kconfig to new build options
` [PATCH v3 05/30] iio: adc: move SUN4I_GPADC_CHANNEL define to header file
` [PATCH v3 06/30] iio: adc: remove ofnode options
` [PATCH v3 07/30] iio: adc: remove mfd_probe & sunwi_irq_init function
` [PATCH v3 08/30] iio: adc: remove hwmon structure
` [PATCH v3 09/30] iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i channel
` [linux-sunxi] "
` [PATCH v3 10/30] iio: adc: rework irq and adc_channel handling
` [PATCH v3 11/30] iio: adc: add new compatibles
` [PATCH v3 12/30] mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/
` [PATCH v3 13/30] arm: config: Enable SUN4I_GPADC in defconfig
` [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
` [PATCH v3 15/30] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
` [PATCH v3 16/30] iio: adc: sun4i-gpadc-iio: rework: readout temp_data
` [PATCH v3 17/30] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
` [PATCH v3 18/30] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
` [PATCH v3 19/30] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
` [PATCH v3 20/30] iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume
` [PATCH v3 21/30] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
` [linux-sunxi] "
` [PATCH v3 22/30] iio: adc: sun4i-gpadc-iio: add support for A83T "
` [PATCH v3 23/30] ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
` [PATCH v3 24/30] ARM: dts: sun8i: h3: add support for the thermal sensor in H3
` [PATCH v3 25/30] ARM: dts: sun8i: h3: add thermal zone to H3
` [PATCH v3 26/30] ARM: dts: sun8i: h3: enable H3 sid controller
` [PATCH v3 27/30] ARM: dts: sun8i: h3: use calibration for ths
` [PATCH v3 28/30] ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T
` [PATCH v3 29/30] ARM: dts: sun8i: a83t: add thermal zone to A83T
` [PATCH v3 30/30] ARM: sun8i: a83t: full range OPP tables and CPUfreq
` [linux-sunxi] "
[PATCH v2 1/4] iio: gyro: add support for fxas21002c
2018-08-30 21:18 UTC (4+ messages)
` [PATCH v2 2/4] iio: gyro: add device tree "
` [PATCH v2 3/4] iio: fxas21002c: add ODR/Scale support
` [PATCH v2 4/4] MAINTAINERS: add entry for fxas21002c gyro driver
[PATCH 5/5] dt-bindings: iio: imu: st_lsm6dsx: add LSM6DSO device bindings
2018-08-30 20:52 UTC
[PATCH 3/5] iio: imu: st_lsm6dsx: add addr/max_word_len to st_lsm6dsx_read_block()
2018-08-30 20:52 UTC
[PATCH 1/5] iio: imu: st_lsm6dsx: add read_fifo callback to fifo_ops
2018-08-30 20:52 UTC
[PATCH] iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
2018-08-30 20:38 UTC
[PATCH 4/5] iio: imu: st_lsm6dsx: add support to LSM6DSO
2018-08-30 20:52 UTC
[PATCH 2/5] iio: imu: st_lsm6dsx: make st_lsm6dsx_check_odr() non-static
2018-08-30 20:52 UTC
[PATCH 0/5] add support to STM LSM6DSO 6-axis Mems sensor
2018-08-30 20:52 UTC
[RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing
2018-08-30 15:35 UTC (20+ messages)
` [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
` [RFC RFT PATCH v4 2/4] gpiolib: Identify arrays matching GPIO hardware
` [RFC RFT PATCH v4 3/4] gpiolib: Pass array info to get/set array functions
` [RFC RFT PATCH v4 4/4] gpiolib: Implement fast processing path in get/set array
` [PATH v5 0/4] gpiolib: speed up GPIO array processing
` [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
` [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware
` [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions
` [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set array
[PATCH 0/3] Add Xilinx AMS Driver
2018-08-30 15:36 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
` [PATCH 2/3] iio: adc: Add Xilinx AMS driver
` [PATCH 3/3] arm64: zynqmp: DT: Add Xilinx AMS node
Idea: regmap_config.use_single_rw -> use_single_read, use_single_write
2018-08-29 17:35 UTC
[PATCH] iio: dac: ad5758: Add support for hard reset
2018-08-29 14:58 UTC
[PATCH 1/4] iio: gyro: add support for fxas21002c
2018-08-29 6:43 UTC (10+ messages)
` [PATCH 2/4] iio: gyro: add device tree "
` [PATCH 3/4] iio: fxas21002c: add ODR/Scale support
` [PATCH 4/4] MAINTAINERS: add entry for fxas21002c gyro driver
[PATCH v2 1/2] iio: adc: sc27xx: Add raw data support
2018-08-29 6:04 UTC (2+ messages)
` [PATCH v2 2/2] iio: adc: sc27xx: Add ADC scale calibration
[PATCH TRIVIAL] iio: fix position relative kernel version
2018-08-28 10:30 UTC
[PATCH 1/2] iio: adc: sc27xx: Add raw data support
2018-08-28 3:20 UTC (6+ messages)
` [PATCH 2/2] iio: adc: sc27xx: Add ADC scale calibration
[PATCH] iio: Convert to using %pOFn instead of device_node.name
2018-08-28 1:52 UTC
[PATCH] iio: adc: qcom-spmi-adc5: Verify channel numbers from DT
2018-08-27 21:14 UTC
[PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device
2018-08-27 14:36 UTC (3+ messages)
` [PATCH v7 RESEND 2/2] ARM: dts: at91: sama5d2: Add resistive touch device
[PATCH] iio: dac: ti-dac5571: provide of_match_table to driver
2018-08-25 9:04 UTC (2+ messages)
[PATCH] Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
2018-08-25 9:00 UTC
[PATCH] iio: dac: ti-dac5571: make vref regulator optional
2018-08-25 8:55 UTC (2+ messages)
[PATCH] iio: dac: mcp4922: fix error handling in mcp4922_write_raw
2018-08-25 8:47 UTC (2+ messages)
[PATCH] iio: light: isl29501: Simplify code to kill compiler warning
2018-08-25 8:30 UTC (2+ messages)
[PATCH v2 1/3] iio: dac: add support for ltc1660
2018-08-25 8:27 UTC (7+ messages)
` [PATCH v2 2/3] dt-bindings: iio: dac: add bindings "
` [PATCH v2 3/3] MAINTAINERS: add entry for ltc1660 DAC driver
[PATCH 3/3] iio:adxl372: Add filter bandwidth support
2018-08-25 8:20 UTC (2+ messages)
[PATCH 2/3] iio:adxl372: Add sampling frequency support
2018-08-25 8:19 UTC (2+ messages)
[PATCH 1/3] iio: adxl372: Provide validate_trigger and validate_device callbacks
2018-08-25 8:16 UTC (4+ messages)
[PATCH v3 0/7] bme680 cleanup
2018-08-25 8:14 UTC (34+ messages)
` [PATCH v3 1/7] iio: chemical: bme680: use clamp macro
` [PATCH v3 2/7] iio: chemical: bme680: cleanup bme680_read_calib formatting
` [PATCH v3 3/7] iio: chemical: bme680: indent #defines consistently
` [PATCH] iio: chemical: bme680: Remove field value defines
` [PATCH v3 4/7] iio: chemical: bme680: change MSK->MASK in #defines
` [PATCH v3 5/7] iio: chemical: bme680: use GENMASK macro
` [PATCH v3 6/7] iio: chemical: bme680: use FIELD_GET macro
` [PATCH v3 7/7] iio: chemical: bme680: simplify oversampling handling
[PATCH] iio: adc: qcom-spmi-adc5: Add ADC5_AMUX_THM[24]_100K_PU to rev2 channel list
2018-08-25 8:09 UTC (4+ messages)
Buffert trigger and Power management support for BME680 ?
2018-08-22 11:54 UTC (8+ messages)
[PATCH 0/5] License cleanup of "my" IIO files
2018-08-20 18:28 UTC (11+ messages)
` [PATCH 1/5] iio: potentiometer: mcp4018: use the correct MODULE_LICENSE
` [PATCH 2/5] iio: potentiometer: mcp4531: switch to SPDX license identifier
` [PATCH 3/5] iio: envelope-detector: "
` [PATCH 4/5] iio: dpot-dac: "
` [PATCH 5/5] iio: multiplexer: "
IIO driver for the Invensense ICM-20948 IMU
2018-08-20 15:55 UTC (4+ messages)
[PATCH] iio: adxl345: move null check for i2c id at start of probe
2018-08-20 8:45 UTC (8+ messages)
[PATCH v6 1/2] iio: light: Add support for vishay vcnl4035
2018-08-20 8:27 UTC (6+ messages)
Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
2018-08-19 19:39 UTC (8+ messages)
[PATCH v4 1/3] iio: adc: add support for mcp3911
2018-08-19 19:38 UTC (7+ messages)
` [PATCH v4 2/3] dt-bindings: iio: adc: add bindings "
[PATCH 0/3] merge calls to of_match_device and of_device_get_match_data
2018-08-19 19:17 UTC (4+ messages)
` [PATCH 3/3] iio: potentiometer: "
[PATCH] iio: chemical: bme680: Add check for val2 in the write_raw function
2018-08-19 19:08 UTC (4+ messages)
[PATCH] iio: max44000: remove unused variable max44000_alstim_shift
2018-08-19 17:28 UTC (2+ messages)
[PATCH v6 0/6] iio: accel: Add adxl372 driver
2018-08-19 17:27 UTC (12+ messages)
` [PATCH v6 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
` [PATCH v6 2/6] dt-bindings: iio: accel: Add docs for ADXL372
` [PATCH v6 3/6] regmap: Add regmap_noinc_read API
` [PATCH v6 4/6] iio:adxl372: Add FIFO and interrupts support
[PATCH] iio: adc: max9611: explicitly cast gain_selectors
2018-08-19 16:49 UTC (2+ messages)
[RESEND PATCH] iio: dac: mcp4725: avoid using CONFIG_PM_SLEEP
2018-08-19 16:43 UTC (2+ messages)
[RESEND PATCH] iio: dac: max5821: avoid using CONFIG_PM_SLEEP
2018-08-19 16:41 UTC (2+ messages)
[RESEND PATCH] iio: dac: max517: avoid using CONFIG_PM_SLEEP
2018-08-19 16:41 UTC (2+ messages)
[PATCH 1/3] iio: dac: add support for ltc166x
2018-08-19 18:52 UTC (3+ messages)
[PATCH 1/7] drivers: iio: Update MODULE AUTHOR email address
2018-08-19 16:24 UTC (2+ messages)
[PATCH] iio: health: max30102: Mark expected switch fall-throughs
2018-08-19 16:22 UTC (2+ messages)
[PATCH] iio: accel: cros_ec_accel_legacy: Mark expected switch fall-throughs
2018-08-19 16:20 UTC (5+ messages)
[PATCH] iio: pressure: ms5611: remove deprecated compatible strings
2018-08-19 16:16 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).