From: "Daniel J. Ogorchock" <djogorchock@gmail.com>
To: linux-input@vger.kernel.org
Cc: thunderbird2k@gmail.com, blaws05@gmail.com,
benjamin.tissoires@redhat.com, jikos@kernel.org,
Roderick.Colenbrander@sony.com, svv@google.com,
s.jegen@gmail.com, carmueller@gmail.com,
"Daniel J. Ogorchock" <djogorchock@gmail.com>
Subject: [PATCH v10 03/12] HID: nintendo: add power supply support
Date: Sun, 29 Dec 2019 19:27:11 -0600 [thread overview]
Message-ID: <20191230012720.2368987-4-djogorchock@gmail.com> (raw)
In-Reply-To: <20191230012720.2368987-1-djogorchock@gmail.com>
This patch adds power_supply functionality to the switch controller
driver for its battery.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
---
drivers/hid/Kconfig | 1 +
drivers/hid/hid-nintendo.c | 133 +++++++++++++++++++++++++++++++++++++
2 files changed, 134 insertions(+)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index af5e68d350eb..9467202cbee2 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -706,6 +706,7 @@ config HID_NINTENDO
depends on HID
depends on NEW_LEDS
depends on LEDS_CLASS
+ select POWER_SUPPLY
help
Adds support for the Nintendo Switch Joy-Cons and Pro Controller.
All controllers support bluetooth, and the Pro Controller also supports
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 2ab3be27f24e..be494f421b02 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -11,6 +11,7 @@
* https://github.com/MTCKC/ProconXInput
* hid-wiimote kernel hid driver
* hid-logitech-hidpp driver
+ * hid-sony driver
*
* This driver supports the Nintendo Switch Joy-Cons and Pro Controllers. The
* Pro Controllers can either be used over USB or Bluetooth.
@@ -27,6 +28,7 @@
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/module.h>
+#include <linux/power_supply.h>
#include <linux/spinlock.h>
/*
@@ -187,6 +189,7 @@ struct joycon_ctlr {
struct input_dev *input;
struct led_classdev leds[JC_NUM_LEDS];
enum joycon_ctlr_state ctlr_state;
+ spinlock_t lock;
/* The following members are used for synchronous sends/receives */
enum joycon_msg_type msg_type;
@@ -204,6 +207,12 @@ struct joycon_ctlr {
struct joycon_stick_cal right_stick_cal_x;
struct joycon_stick_cal right_stick_cal_y;
+ /* power supply data */
+ struct power_supply *battery;
+ struct power_supply_desc battery_desc;
+ u8 battery_capacity;
+ bool battery_charging;
+ bool host_powered;
};
static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len)
@@ -434,9 +443,41 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr,
struct joycon_input_report *rep)
{
struct input_dev *dev = ctlr->input;
+ unsigned long flags;
+ u8 tmp;
u32 btns;
u32 id = ctlr->hdev->product;
+ /* Parse the battery status */
+ tmp = rep->bat_con;
+ spin_lock_irqsave(&ctlr->lock, flags);
+ ctlr->host_powered = tmp & BIT(0);
+ ctlr->battery_charging = tmp & BIT(4);
+ tmp = tmp >> 5;
+ switch (tmp) {
+ case 0: /* empty */
+ ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ break;
+ case 1: /* low */
+ ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case 2: /* medium */
+ ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case 3: /* high */
+ ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+ break;
+ case 4: /* full */
+ ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ break;
+ default:
+ ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ hid_warn(ctlr->hdev, "Invalid battery status\n");
+ break;
+ }
+ spin_unlock_irqrestore(&ctlr->lock, flags);
+
+ /* Parse the buttons and sticks */
btns = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24);
if (id != USB_DEVICE_ID_NINTENDO_JOYCONR) {
@@ -690,6 +731,90 @@ static int joycon_player_leds_create(struct joycon_ctlr *ctlr)
return 0;
}
+static int joycon_battery_get_property(struct power_supply *supply,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct joycon_ctlr *ctlr = power_supply_get_drvdata(supply);
+ unsigned long flags;
+ int ret = 0;
+ u8 capacity;
+ bool charging;
+ bool powered;
+
+ spin_lock_irqsave(&ctlr->lock, flags);
+ capacity = ctlr->battery_capacity;
+ charging = ctlr->battery_charging;
+ powered = ctlr->host_powered;
+ spin_unlock_irqrestore(&ctlr->lock, flags);
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ val->intval = capacity;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (charging)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (capacity == POWER_SUPPLY_CAPACITY_LEVEL_FULL &&
+ powered)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property joycon_battery_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_STATUS,
+};
+
+static int joycon_power_supply_create(struct joycon_ctlr *ctlr)
+{
+ struct hid_device *hdev = ctlr->hdev;
+ struct power_supply_config supply_config = { .drv_data = ctlr, };
+ const char * const name_fmt = "nintendo_switch_controller_battery_%s";
+ int ret = 0;
+
+ /* Set initially to unknown before receiving first input report */
+ ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+
+ /* Configure the battery's description */
+ ctlr->battery_desc.properties = joycon_battery_props;
+ ctlr->battery_desc.num_properties =
+ ARRAY_SIZE(joycon_battery_props);
+ ctlr->battery_desc.get_property = joycon_battery_get_property;
+ ctlr->battery_desc.use_for_apm = 0;
+ ctlr->battery_desc.name = devm_kasprintf(&hdev->dev, GFP_KERNEL,
+ name_fmt,
+ dev_name(&hdev->dev));
+ if (!ctlr->battery_desc.name)
+ return -ENOMEM;
+
+ ctlr->battery = devm_power_supply_register(&hdev->dev,
+ &ctlr->battery_desc,
+ &supply_config);
+ if (IS_ERR(ctlr->battery)) {
+ ret = PTR_ERR(ctlr->battery);
+ hid_err(hdev, "Failed to register battery; ret=%d\n", ret);
+ return ret;
+ }
+ power_supply_powers(ctlr->battery, &hdev->dev);
+ return 0;
+}
+
/* Common handler for parsing inputs */
static int joycon_ctlr_read_handler(struct joycon_ctlr *ctlr, u8 *data,
int size)
@@ -783,6 +908,7 @@ static int nintendo_hid_probe(struct hid_device *hdev,
hid_set_drvdata(hdev, ctlr);
mutex_init(&ctlr->output_mutex);
init_waitqueue_head(&ctlr->wait);
+ spin_lock_init(&ctlr->lock);
ret = hid_parse(hdev);
if (ret) {
@@ -855,6 +981,13 @@ static int nintendo_hid_probe(struct hid_device *hdev,
goto err_close;
}
+ /* Initialize the battery power supply */
+ ret = joycon_power_supply_create(ctlr);
+ if (ret) {
+ hid_err(hdev, "Failed to create power_supply; ret=%d\n", ret);
+ goto err_close;
+ }
+
ret = joycon_input_create(ctlr);
if (ret) {
hid_err(hdev, "Failed to create input device; ret=%d\n", ret);
--
2.24.1
next prev parent reply other threads:[~2019-12-30 1:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-30 1:27 [PATCH v10 00/12] HID:nintendo Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 01/12] HID: nintendo: add nintendo switch controller driver Daniel J. Ogorchock
2021-05-24 16:34 ` Lee Jones
2021-05-24 16:55 ` Barnabás Pőcze
2019-12-30 1:27 ` [PATCH v10 02/12] HID: nintendo: add player led support Daniel J. Ogorchock
2019-12-30 1:27 ` Daniel J. Ogorchock [this message]
2019-12-30 1:27 ` [PATCH v10 04/12] HID: nintendo: add home " Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 05/12] HID: nintendo: add rumble support Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 06/12] HID: nintendo: improve subcommand reliability Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 07/12] HID: nintendo: send subcommands after receiving input report Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 08/12] HID: nintendo: reduce device removal subcommand errors Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 09/12] HID: nintendo: patch hw version for userspace HID mappings Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 10/12] HID: nintendo: set controller uniq to MAC Daniel J. Ogorchock
2019-12-30 1:27 ` [PATCH v10 11/12] HID: nintendo: add IMU support Daniel J. Ogorchock
2019-12-31 6:29 ` Roderick Colenbrander
2020-01-09 3:26 ` Daniel Ogorchock
2020-01-09 5:22 ` Roderick Colenbrander
2020-01-09 6:23 ` Carl Mueller
2020-01-09 8:53 ` Daniel Ogorchock
2020-01-09 16:37 ` Roderick Colenbrander
2020-01-09 20:38 ` Carl Mueller
[not found] ` <CAKF84v26=X8OLPavdE52tprm=WOynUXRz2aDjz5Bvqw6rdTZQg@mail.gmail.com>
2020-01-18 3:49 ` Daniel Ogorchock
2020-01-21 18:19 ` Siarhei Vishniakou
2020-01-21 2:49 ` Daniel Ogorchock
2020-01-22 5:19 ` Roderick Colenbrander
2020-01-09 8:55 ` Daniel Ogorchock
2019-12-30 1:27 ` [PATCH v10 12/12] HID: nintendo: add support for charging grip Daniel J. Ogorchock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191230012720.2368987-4-djogorchock@gmail.com \
--to=djogorchock@gmail.com \
--cc=Roderick.Colenbrander@sony.com \
--cc=benjamin.tissoires@redhat.com \
--cc=blaws05@gmail.com \
--cc=carmueller@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=s.jegen@gmail.com \
--cc=svv@google.com \
--cc=thunderbird2k@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).