From: Hans de Goede <hdegoede@redhat.com>
To: Ard Biesheuvel <ardb@kernel.org>,
Darren Hart <dvhart@infradead.org>,
Andy Shevchenko <andy@infradead.org>,
Luis Chamberlain <mcgrof@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
"H . Peter Anvin" <hpa@zytor.com>,
Jonathan Corbet <corbet@lwn.net>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
Peter Jones <pjones@redhat.com>, Dave Olsthoorn <dave@bewaar.me>,
x86@kernel.org, platform-driver-x86@vger.kernel.org,
linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
Date: Wed, 15 Jan 2020 17:35:44 +0100 [thread overview]
Message-ID: <20200115163554.101315-1-hdegoede@redhat.com> (raw)
Hi All,
Here is v12 of my patch-set to add support for EFI embedded fw to the
kernel.
This version addresses Luis' review remarks for the test_firmware stuff
and addresses some of Andy Lutomirski's remarks (while for some others
I've explained why I've done things a certain way).
It would be nice if we could at least get patches 1 and 2 merged for
5.6 (assuming Andy is ok with them now), then we can get the rest merged
once 5.6-rc1 is out.
As mentioned in the v11 cover letter, I've based this version on Ard's
efi/next branch to avoid conflict with some changes already there.
Regards,
Hans
---
Changes in v12:
- Use memcmp to check the prefix in efi_check_for_embedded_firmwares()
- Move the vmalloc (vmemdup) for the firmware copy owned by the firmare
subsys from efi_get_embedded_fw() to firmware_fallback_platform(), so
that it is is in the same subsys as the vfree which eventually frees it.
- Use local / private firmware variable for the test instead of the
global test_firmware variable and drop the mutex lock + unlock needed
for accessing the global test_firmware variable
Changes in v11:
- Rebase on top of Ardb's efi/next
- Drop a couple of empty lines which snuck into:
"test_firmware: add support for firmware_request_platform"
Changes in v10:
- Rebase on top of 5.5-rc1
Changes in v9:
- Add 2 new patches adding selftests
- At least touchscreen_dmi.c uses the same dmi_table for its own private
data and the fw_desc structs, putting the fw_desc struct first in the
data driver_data points to so that the dmi_table can be shared with
efi_check_for_embedded_firmwares(). But not all entries there have
embedded-fw so in some cases the fw_desc is empty (zero-ed out).
This can lead to a possible crash because fw_desc->length now is
less then 8, so if the segment size is close enough to a multiple of the
page_size, then the memcmp to check the prefix my segfault. Crashing the
machine. v9 checks for and skips these empty fw_desc entries avoiding this.
- Add static inline wrapper for firmware_request_platform() to firmware.h,
for when CONFIG_FW_LOADER is not set
Changes in v8:
- Add pr_warn if there are mode then EFI_DEBUGFS_MAX_BLOBS boot service segments
- Document how the EFI debugfs boot_service_code? files can be used to check for
embedded firmware
- Properly deal with the case of an EFI segment being smaller then the fw we
are looking for
- Log a warning when efi_get_embedded_fw get called while we did not (yet)
check for embedded firmwares
- Only build fallback_platform.c if CONFIG_EFI_EMBEDDED_FIRMWARE is defined,
otherwise make firmware_fallback_platform() a static inline stub
Changes in v7:
- Split drivers/firmware/efi and drivers/base/firmware_loader changes into
2 patches
- Use new, standalone, lib/crypto/sha256.c code
- Address kdoc comments from Randy Dunlap
- Add new FW_OPT_FALLBACK_PLATFORM flag and firmware_request_platform()
_request_firmware() wrapper, as requested by Luis R. Rodriguez
- Stop using "efi-embedded-firmware" device-property, now that drivers need to
use the new firmware_request_platform() to enable fallback to a device fw
copy embedded in the platform's main firmware, we no longer need a property
on the device to trigger this behavior
- Use security_kernel_load_data instead of calling
security_kernel_read_file with a NULL file pointer argument
- Move the docs to Documentation/driver-api/firmware/fallback-mechanisms.rst
- Document the new firmware_request_platform() function in
Documentation/driver-api/firmware/request_firmware.rst
- Add 2 new patches for the silead and chipone-icn8505 touchscreen drivers
to use the new firmware_request_platform() method
- Rebased on top of 5.4-rc1
Changes in v6:
-Rework code to remove casts from if (prefix == mem) comparison
-Use SHA256 hashes instead of crc32 sums
-Add new READING_FIRMWARE_EFI_EMBEDDED read_file_id and use it
-Call security_kernel_read_file(NULL, READING_FIRMWARE_EFI_EMBEDDED)
to check if this is allowed before looking at EFI embedded fw
-Document why we are not using the PI Firmware Volume protocol
Changes in v5:
-Rename the EFI_BOOT_SERVICES flag to EFI_PRESERVE_BS_REGIONS
Changes in v4:
-Drop note in docs about EFI_FIRMWARE_VOLUME_PROTOCOL, it is not part of
UEFI proper, so the EFI maintainers don't want us referring people to it
-Use new EFI_BOOT_SERVICES flag
-Put the new fw_get_efi_embedded_fw() function in its own fallback_efi.c
file which only gets built when EFI_EMBEDDED_FIRMWARE is selected
-Define an empty stub for fw_get_efi_embedded_fw() in fallback.h hwen
EFI_EMBEDDED_FIRMWARE is not selected, to avoid the need for #ifdefs
in firmware_loader/main.c
-Properly call security_kernel_post_read_file() on the firmware returned
by efi_get_embedded_fw() to make sure that we are allowed to use it
Changes in v2:
-Rebased on driver-core/driver-core-next
-Add documentation describing the EFI embedded firmware mechanism to:
Documentation/driver-api/firmware/request_firmware.rst
-Add a new EFI_EMBEDDED_FIRMWARE Kconfig bool and only build the embedded
fw support if this is set. This is an invisible option which should be
selected by drivers which need this
-Remove the efi_embedded_fw_desc and dmi_system_id-s for known devices
from the efi-embedded-fw code, instead drivers using this are expected to
export a dmi_system_id array, with each entries' driver_data pointing to a
efi_embedded_fw_desc struct and register this with the efi-embedded-fw code
-Use kmemdup to make a copy instead of efi_mem_reserve()-ing the firmware,
this avoids us messing with the EFI memmap and avoids the need to make
changes to efi_mem_desc_lookup()
-Make the firmware-loader code only fallback to efi_get_embedded_fw() if the
passed in device has the "efi-embedded-firmware" device-property bool set
-Skip usermodehelper fallback when "efi-embedded-firmware" device-property
is set
next reply other threads:[~2020-01-15 16:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 16:35 Hans de Goede [this message]
2020-01-15 16:35 ` [PATCH v12 01/10] efi: Export boot-services code and data as debugfs-blobs Hans de Goede
2020-01-15 16:35 ` [PATCH v12 02/10] efi: Add embedded peripheral firmware support Hans de Goede
2020-01-15 16:35 ` [PATCH v12 03/10] firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS Hans de Goede
2020-01-24 8:57 ` Greg Kroah-Hartman
2020-01-24 9:16 ` Hans de Goede
2020-03-18 13:27 ` Greg Kroah-Hartman
2020-03-18 13:56 ` Hans de Goede
2020-03-20 14:02 ` Greg Kroah-Hartman
2020-03-20 16:41 ` Hans de Goede
2020-01-15 16:35 ` [PATCH v12 04/10] firmware: Add new platform fallback mechanism and firmware_request_platform() Hans de Goede
2020-01-15 16:35 ` [PATCH v12 05/10] test_firmware: add support for firmware_request_platform Hans de Goede
2020-01-15 16:41 ` Luis Chamberlain
2020-01-15 16:35 ` [PATCH v12 06/10] selftests: firmware: Add firmware_request_platform tests Hans de Goede
2020-01-15 16:41 ` Luis Chamberlain
2020-01-15 16:35 ` [PATCH v12 07/10] Input: silead - Switch to firmware_request_platform for retreiving the fw Hans de Goede
2020-01-15 16:35 ` [PATCH v12 08/10] Input: icn8505 " Hans de Goede
2020-01-15 16:35 ` [PATCH v12 09/10] platform/x86: touchscreen_dmi: Add EFI embedded firmware info support Hans de Goede
2020-01-15 16:35 ` [PATCH v12 10/10] platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200115163554.101315-1-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@infradead.org \
--cc=ardb@kernel.org \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=dave@bewaar.me \
--cc=dmitry.torokhov@gmail.com \
--cc=dvhart@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=hpa@zytor.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mcgrof@kernel.org \
--cc=mingo@redhat.com \
--cc=pjones@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).