From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<bsz@semihalf.com>, <rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
<jiada_wang@mentor.com>
Subject: [PATCH v8 06/52] Input: atmel_mxt_ts - output status from T42 Touch Suppression
Date: Thu, 19 Mar 2020 07:59:30 -0700 [thread overview]
Message-ID: <20200319150016.61398-7-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200319150016.61398-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
This patch outputs status from T42 touch suppression
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit ab95b5a309999d2c098daaa9f88d9fcfae7eb516)
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: Replace dev_info() with dev_dbg()]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 25 ++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a53985a7736f..f6465edaa57e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -155,6 +155,9 @@ struct t37_debug {
#define MXT_RESET_VALUE 0x01
#define MXT_BACKUP_VALUE 0x55
+/* Define for MXT_PROCI_TOUCHSUPPRESSION_T42 */
+#define MXT_T42_MSG_TCHSUP BIT(0)
+
/* T100 Multiple Touch Touchscreen */
#define MXT_T100_CTRL 0
#define MXT_T100_CFG1 1
@@ -323,6 +326,8 @@ struct mxt_data {
u8 T9_reportid_max;
u16 T18_address;
u8 T19_reportid;
+ u8 T42_reportid_min;
+ u8 T42_reportid_max;
u16 T44_address;
u8 T48_reportid;
u8 T100_reportid_min;
@@ -979,6 +984,17 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
data->update_input = true;
}
+static void mxt_proc_t42_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ if (status & MXT_T42_MSG_TCHSUP)
+ dev_dbg(dev, "T42 suppress\n");
+ else
+ dev_dbg(dev, "T42 normal\n");
+}
+
static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
{
struct device *dev = &data->client->dev;
@@ -1006,6 +1022,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
if (report_id == data->T6_reportid) {
mxt_proc_t6_messages(data, message);
+ } else if (report_id >= data->T42_reportid_min
+ && report_id <= data->T42_reportid_max) {
+ mxt_proc_t42_messages(data, message);
} else if (report_id == data->T48_reportid) {
mxt_proc_t48_messages(data, message);
} else if (!data->input_dev) {
@@ -1686,6 +1705,8 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T9_reportid_max = 0;
data->T18_address = 0;
data->T19_reportid = 0;
+ data->T42_reportid_min = 0;
+ data->T42_reportid_max = 0;
data->T44_address = 0;
data->T48_reportid = 0;
data->T100_reportid_min = 0;
@@ -1763,6 +1784,10 @@ static int mxt_parse_object_table(struct mxt_data *data,
case MXT_SPT_COMMSCONFIG_T18:
data->T18_address = object->start_address;
break;
+ case MXT_PROCI_TOUCHSUPPRESSION_T42:
+ data->T42_reportid_min = min_id;
+ data->T42_reportid_max = max_id;
+ break;
case MXT_SPT_MESSAGECOUNT_T44:
data->T44_address = object->start_address;
break;
--
2.17.1
next prev parent reply other threads:[~2020-03-19 15:00 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-19 14:59 [PATCH v8 00/52] atmel_mxt_ts misc Jiada Wang
2020-03-19 14:59 ` [PATCH v8 01/52] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-19 14:59 ` [PATCH v8 02/52] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-19 14:59 ` [PATCH v8 03/52] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-19 14:59 ` [PATCH v8 04/52] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-19 14:59 ` [PATCH v8 05/52] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-19 14:59 ` Jiada Wang [this message]
2020-03-19 14:59 ` [PATCH v8 07/52] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 08/52] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 09/52] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-19 14:59 ` [PATCH v8 10/52] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-19 14:59 ` [PATCH v8 11/52] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 12/52] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-19 14:59 ` [PATCH v8 13/52] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 14/52] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 15/52] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-19 14:59 ` [PATCH v8 16/52] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-19 14:59 ` [PATCH v8 17/52] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 18/52] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-19 14:59 ` [PATCH v8 19/52] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-19 14:59 ` [PATCH v8 20/52] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-19 14:59 ` [PATCH v8 21/52] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 22/52] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-19 14:59 ` [PATCH v8 23/52] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-19 14:59 ` [PATCH v8 24/52] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-19 14:59 ` [PATCH v8 25/52] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-19 14:59 ` [PATCH v8 26/52] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-19 14:59 ` [PATCH v8 27/52] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-19 14:59 ` [PATCH v8 28/52] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-03-19 14:59 ` [PATCH v8 29/52] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-19 14:59 ` [PATCH v8 30/52] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-19 14:59 ` [PATCH v8 31/52] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-19 14:59 ` [PATCH v8 32/52] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-19 14:59 ` [PATCH v8 33/52] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-19 14:59 ` [PATCH v8 34/52] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-19 14:59 ` [PATCH v8 35/52] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-19 15:00 ` [PATCH v8 36/52] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-19 15:00 ` [PATCH v8 37/52] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-19 15:00 ` [PATCH v8 38/52] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-19 15:00 ` [PATCH v8 39/52] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-19 15:00 ` [PATCH v8 40/52] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-03-19 15:00 ` [PATCH v8 41/52] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 42/52] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 43/52] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 44/52] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 45/52] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 46/52] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-19 15:00 ` [PATCH v8 47/52] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-19 15:00 ` [PATCH v8 48/52] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-19 15:00 ` [PATCH v8 49/52] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-19 15:00 ` [PATCH v8 50/52] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-19 15:00 ` [PATCH v8 51/52] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-03-19 15:00 ` [PATCH v8 52/52] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200319150016.61398-7-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bsz@semihalf.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).