linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Douglas Anderson <dianders@chromium.org>
To: jkosina@suse.cz, benjamin.tissoires@redhat.com,
	gregkh@linuxfoundation.org,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: andrea@borgia.bo.it, robh+dt@kernel.org,
	kai.heng.feng@canonical.com, swboyd@chromium.org,
	linux-input@vger.kernel.org, hdegoede@redhat.com,
	Douglas Anderson <dianders@chromium.org>,
	Jiri Kosina <jikos@kernel.org>,
	Masahiro Yamada <masahiroy@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v6 4/4] HID: i2c-hid: Introduce goodix-i2c-hid using i2c-hid core
Date: Wed, 11 Nov 2020 16:41:30 -0800	[thread overview]
Message-ID: <20201111164027.v6.4.If41b7d621633b94d56653c6d53f5f89c5274de7b@changeid> (raw)
In-Reply-To: <20201112004130.17290-1-dianders@chromium.org>

Goodix i2c-hid touchscreens are mostly i2c-hid compliant but have some
special power sequencing requirements, including the need to drive a
reset line during the sequencing.

Let's use the new rejiggering of i2c-hid to support this with a thin
wrapper driver to support the first Goodix i2c-hid touchscreen:
GT7375P

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v6:
- Suspend/resume are no longer exported from the core.

Changes in v5:
- i2chid_subclass_data => i2chid_ops.
- power_up_device => power_up (same with power_down).
- subclass => ops.

Changes in v4:
- Totally redid based on the new subclass system.

Changes in v3:
- Rework to use subclassing.

 drivers/hid/i2c-hid/Kconfig             |  19 +++-
 drivers/hid/i2c-hid/Makefile            |   1 +
 drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 116 ++++++++++++++++++++++++
 3 files changed, 134 insertions(+), 2 deletions(-)
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-of-goodix.c

diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index 819b7521c182..a16c6a69680b 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -32,10 +32,25 @@ config I2C_HID_OF
 	  will be called i2c-hid-of.  It will also build/depend on the
 	  module i2c-hid.
 
+config I2C_HID_OF_GOODIX
+	tristate "Driver for Goodix hid-i2c based devices on OF systems"
+	default n
+	depends on I2C && INPUT && OF
+	help
+	  Say Y here if you want support for Goodix i2c devices that use
+	  the i2c-hid protocol on Open Firmware (Device Tree)-based
+	  systems.
+
+	  If unsure, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hid-of-goodix.  It will also build/depend on
+	  the module i2c-hid.
+
 endmenu
 
 config I2C_HID_CORE
 	tristate
-	default y if I2C_HID_ACPI=y || I2C_HID_OF=y
-	default m if I2C_HID_ACPI=m || I2C_HID_OF=m
+	default y if I2C_HID_ACPI=y || I2C_HID_OF=y || I2C_HID_OF_GOODIX=y
+	default m if I2C_HID_ACPI=m || I2C_HID_OF=m || I2C_HID_OF_GOODIX=m
 	select HID
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
index 9b4a73446841..302545a771f3 100644
--- a/drivers/hid/i2c-hid/Makefile
+++ b/drivers/hid/i2c-hid/Makefile
@@ -10,3 +10,4 @@ i2c-hid-$(CONFIG_DMI)				+= i2c-hid-dmi-quirks.o
 
 obj-$(CONFIG_I2C_HID_ACPI)			+= i2c-hid-acpi.o
 obj-$(CONFIG_I2C_HID_OF)			+= i2c-hid-of.o
+obj-$(CONFIG_I2C_HID_OF_GOODIX)			+= i2c-hid-of-goodix.o
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
new file mode 100644
index 000000000000..7cc51c25c609
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Goodix touchscreens that use the i2c-hid protocol.
+ *
+ * Copyright 2020 Google LLC
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+
+#include "i2c-hid.h"
+
+struct goodix_i2c_hid_timing_data {
+	unsigned int post_gpio_reset_delay_ms;
+	unsigned int post_power_delay_ms;
+};
+
+struct i2c_hid_of_goodix {
+	struct i2chid_ops ops;
+
+	struct regulator *vdd;
+	struct gpio_desc *reset_gpio;
+	const struct goodix_i2c_hid_timing_data *timings;
+};
+
+static int goodix_i2c_hid_power_up(struct i2chid_ops *ops)
+{
+	struct i2c_hid_of_goodix *ihid_goodix =
+		container_of(ops, struct i2c_hid_of_goodix, ops);
+	int ret;
+
+	ret = regulator_enable(ihid_goodix->vdd);
+	if (ret)
+		return ret;
+
+	if (ihid_goodix->timings->post_power_delay_ms)
+		msleep(ihid_goodix->timings->post_power_delay_ms);
+
+	gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 0);
+	if (ihid_goodix->timings->post_gpio_reset_delay_ms)
+		msleep(ihid_goodix->timings->post_gpio_reset_delay_ms);
+
+	return 0;
+}
+
+static void goodix_i2c_hid_power_down(struct i2chid_ops *ops)
+{
+	struct i2c_hid_of_goodix *ihid_goodix =
+		container_of(ops, struct i2c_hid_of_goodix, ops);
+
+	gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1);
+	regulator_disable(ihid_goodix->vdd);
+}
+
+static int i2c_hid_of_goodix_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct i2c_hid_of_goodix *ihid_goodix;
+
+	ihid_goodix = devm_kzalloc(&client->dev, sizeof(*ihid_goodix),
+				   GFP_KERNEL);
+	if (!ihid_goodix)
+		return -ENOMEM;
+
+	ihid_goodix->ops.power_up = goodix_i2c_hid_power_up;
+	ihid_goodix->ops.power_down = goodix_i2c_hid_power_down;
+
+	/* Start out with reset asserted */
+	ihid_goodix->reset_gpio =
+		devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ihid_goodix->reset_gpio))
+		return PTR_ERR(ihid_goodix->reset_gpio);
+
+	ihid_goodix->vdd = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(ihid_goodix->vdd))
+		return PTR_ERR(ihid_goodix->vdd);
+
+	ihid_goodix->timings = device_get_match_data(&client->dev);
+
+	return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001);
+}
+
+static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {
+	.post_power_delay_ms = 10,
+	.post_gpio_reset_delay_ms = 120,
+};
+
+static const struct of_device_id goodix_i2c_hid_of_match[] = {
+	{ .compatible = "goodix,gt7375p", .data = &goodix_gt7375p_timing_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, goodix_i2c_hid_of_match);
+
+static struct i2c_driver goodix_i2c_hid_ts_driver = {
+	.driver = {
+		.name	= "i2c_hid_of_goodix",
+		.pm	= &i2c_hid_core_pm,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = of_match_ptr(goodix_i2c_hid_of_match),
+	},
+	.probe		= i2c_hid_of_goodix_probe,
+	.remove		= i2c_hid_core_remove,
+	.shutdown	= i2c_hid_core_shutdown,
+};
+module_i2c_driver(goodix_i2c_hid_ts_driver);
+
+MODULE_AUTHOR("Douglas Anderson <dianders@chromium.org>");
+MODULE_DESCRIPTION("Goodix i2c-hid touchscreen driver");
+MODULE_LICENSE("GPL v2");
-- 
2.29.2.222.g5d2a92d10f8-goog


  parent reply	other threads:[~2020-11-12  1:34 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-12  0:41 [PATCH v6 0/4] HID: i2c-hid: Reorganize to allow supporting goodix,gt7375p Douglas Anderson
2020-11-12  0:41 ` [PATCH v6 1/4] HID: i2c-hid: Reorganize so ACPI and OF are separate modules Douglas Anderson
2020-11-12  0:41 ` [PATCH v6 2/4] arm64: defconfig: Update config names for i2c-hid rejigger Douglas Anderson
2020-11-12  0:41 ` [PATCH v6 3/4] dt-bindings: input: HID: i2c-hid: Introduce bindings for the Goodix GT7375P Douglas Anderson
2020-11-12  0:41 ` Douglas Anderson [this message]
2020-12-01 21:12 ` [PATCH v6 0/4] HID: i2c-hid: Reorganize to allow supporting goodix,gt7375p Doug Anderson
2020-12-02 15:19   ` Benjamin Tissoires
2020-12-02 15:54     ` Doug Anderson
2020-12-08 16:00       ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201111164027.v6.4.If41b7d621633b94d56653c6d53f5f89c5274de7b@changeid \
    --to=dianders@chromium.org \
    --cc=andrea@borgia.bo.it \
    --cc=benjamin.tissoires@redhat.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=jikos@kernel.org \
    --cc=jkosina@suse.cz \
    --cc=kai.heng.feng@canonical.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masahiroy@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).