Re: [PATCH v3 27/27] Input: bu21029_ts - Use local 'client->dev' variable in probe()

[Andy Shevchenko <andy.shevchenko@gmail.com>]

On Thu, Aug 27, 2020 at 10:00 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> 'dev' is shorter and simpler than '&client->dev' and in few cases it
> allows to skip line wrapping. Probe function uses '&client->dev' a lot,
> so this improves readability slightly.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Changes since v2:
> 1. New patch
> ---
>  drivers/input/touchscreen/bu21029_ts.c | 37 +++++++++++---------------
>  1 file changed, 16 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/input/touchscreen/bu21029_ts.c b/drivers/input/touchscreen/bu21029_ts.c
> index 96c178b606dc..78e256254764 100644
> --- a/drivers/input/touchscreen/bu21029_ts.c
> +++ b/drivers/input/touchscreen/bu21029_ts.c
> @@ -334,6 +334,7 @@ static void bu21029_stop_chip(struct input_dev *dev)
>  static int bu21029_probe(struct i2c_client *client,
>                          const struct i2c_device_id *id)
>  {
> +       struct device *dev = &client->dev;
>         struct bu21029_ts_data *bu21029;
>         struct input_dev *in_dev;
>         int error;
> @@ -342,37 +343,33 @@ static int bu21029_probe(struct i2c_client *client,
>                                      I2C_FUNC_SMBUS_WRITE_BYTE |
>                                      I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
>                                      I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
> -               dev_err(&client->dev,
> -                       "i2c functionality support is not sufficient\n");
> +               dev_err(dev, "i2c functionality support is not sufficient\n");
>                 return -EIO;
>         }
>
> -       bu21029 = devm_kzalloc(&client->dev, sizeof(*bu21029), GFP_KERNEL);
> +       bu21029 = devm_kzalloc(dev, sizeof(*bu21029), GFP_KERNEL);
>         if (!bu21029)
>                 return -ENOMEM;
>
> -       error = device_property_read_u32(&client->dev, "rohm,x-plate-ohms",
> -                                        &bu21029->x_plate_ohms);
> +       error = device_property_read_u32(dev, "rohm,x-plate-ohms", &bu21029->x_plate_ohms);
>         if (error) {
> -               dev_err(&client->dev,
> -                       "invalid 'x-plate-ohms' supplied: %d\n", error);
> +               dev_err(dev, "invalid 'x-plate-ohms' supplied: %d\n", error);
>                 return error;
>         }
>
> -       bu21029->vdd = devm_regulator_get(&client->dev, "vdd");
> +       bu21029->vdd = devm_regulator_get(dev, "vdd");
>         if (IS_ERR(bu21029->vdd))
> -               return dev_err_probe(&client->dev, PTR_ERR(bu21029->vdd),
> +               return dev_err_probe(dev, PTR_ERR(bu21029->vdd),
>                                      "failed to acquire 'vdd' supply\n");
>
> -       bu21029->reset_gpios = devm_gpiod_get_optional(&client->dev,
> -                                                      "reset", GPIOD_OUT_HIGH);
> +       bu21029->reset_gpios = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
>         if (IS_ERR(bu21029->reset_gpios))
> -               return dev_err_probe(&client->dev, PTR_ERR(bu21029->reset_gpios),
> +               return dev_err_probe(dev, PTR_ERR(bu21029->reset_gpios),
>                                      "failed to acquire 'reset' gpio\n");
>
> -       in_dev = devm_input_allocate_device(&client->dev);
> +       in_dev = devm_input_allocate_device(dev);
>         if (!in_dev) {
> -               dev_err(&client->dev, "unable to allocate input device\n");
> +               dev_err(dev, "unable to allocate input device\n");
>                 return -ENOMEM;
>         }
>
> @@ -394,19 +391,17 @@ static int bu21029_probe(struct i2c_client *client,
>         input_set_drvdata(in_dev, bu21029);
>
>         irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
> -       error = devm_request_threaded_irq(&client->dev, client->irq,
> -                                         NULL, bu21029_touch_soft_irq,
> -                                         IRQF_ONESHOT, DRIVER_NAME, bu21029);
> +       error = devm_request_threaded_irq(dev, client->irq, NULL,
> +                                         bu21029_touch_soft_irq, IRQF_ONESHOT,
> +                                         DRIVER_NAME, bu21029);
>         if (error) {
> -               dev_err(&client->dev,
> -                       "unable to request touch irq: %d\n", error);
> +               dev_err(dev, "unable to request touch irq: %d\n", error);
>                 return error;
>         }
>
>         error = input_register_device(in_dev);
>         if (error) {
> -               dev_err(&client->dev,
> -                       "unable to register input device: %d\n", error);
> +               dev_err(dev, "unable to register input device: %d\n", error);
>                 return error;
>         }
>
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko