linux-integrity.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: "Winkler, Tomas" <tomas.winkler@intel.com>
Cc: "linux-integrity@vger.kernel.org"
	<linux-integrity@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-security-module@vger.kernel.org" 
	<linux-security-module@vger.kernel.org>,
	"stable@vger.kernel.org" <stable@vger.kernel.org>,
	James Morris <jmorris@namei.org>,
	Jerry Snitselaar <jsnitsel@redhat.com>
Subject: Re: [PATCH v2] tpm/tpm_crb: Avoid unaligned reads in crb_recv()
Date: Tue, 5 Feb 2019 01:24:11 +0200	[thread overview]
Message-ID: <20190204232411.GA14992@linux.intel.com> (raw)
In-Reply-To: <5B8DA87D05A7694D9FA63FD143655C1B9DA901F7@hasmsx108.ger.corp.intel.com>

On Mon, Feb 04, 2019 at 10:09:51PM +0000, Winkler, Tomas wrote:
> > 
> > The current approach to read first 6 bytes from the response and then tail of
> > the response, can cause the 2nd memcpy_fromio() to do an unaligned read
> > (e.g. read 32-bit word from address aligned to a 16-bits), depending on how
> > memcpy_fromio() is implemented. If this happens, the read will fail and the
> > memory controller will fill the read with 1's.
> > 
> > This was triggered by 170d13ca3a2f, which should be probably refined to check
> > and react to the address alignment. Before that commit, on x86
> > memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right
> > thing (from tpm_crb's perspective) for us so far, but we should not rely on that.
> > Thus, it makes sense to fix this also in tpm_crb, not least because the fix can be
> > then backported to stable kernels and make them more robust when compiled
> > in differing environments.
> > 
> > Cc: stable@vger.kernel.org
> > Cc: James Morris <jmorris@namei.org>
> > Cc: Tomas Winkler <tomas.winkler@intel.com>
> > Cc: Jerry Snitselaar <jsnitsel@redhat.com>
> > Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
> After fixing the typos you can add my ack. 
> Thanks
> Tomas
> 
> > ---
> > v2:
> > * There was a trailing double colon in the end of the short summary.
> > * Check requested and expected length against TPM_HEADER_SIZE.
> > * Add some explanatory comments to crb_recv().
> >  drivers/char/tpm/tpm_crb.c | 22 ++++++++++++++++------
> >  1 file changed, 16 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index
> > 36952ef98f90..c084e61299aa 100644
> > --- a/drivers/char/tpm/tpm_crb.c
> > +++ b/drivers/char/tpm/tpm_crb.c
> > @@ -287,19 +287,29 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf,
> > size_t count)
> >  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> >  	unsigned int expected;
> > 
> > -	/* sanity check */
> > -	if (count < 6)
> > +	/* A sanity check that the upper layer wants to get at least the header
> > +	 * as that is the minimum size for any TPM response.
> > +	 */
> > +	if (count < TPM_HEADER_SIZE)
> >  		return -EIO;
> > 
> > +	/* If this bit is set, according to the spec, the TPM is in unrecovable
>                                                                                                      ^^^ typo ^^^^
> > +	 * condition.
> > +	 */
> >  	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
> >  		return -EIO;
> > 
> > -	memcpy_fromio(buf, priv->rsp, 6);
> > -	expected = be32_to_cpup((__be32 *) &buf[2]);
> > -	if (expected > count || expected < 6)
> > +	/* Read 8 bytes (not just 6 bytes, which would cover ^^^ tag and^^^ the response
> > length
> > +	 * field ^^^s^^^) in order to make sure that the reminding memory accesses
>                                                                              ^^^ remaining^^^  
> > will
> > +	 * be aligned.
> > +	 */
> > +	memcpy_fromio(buf, priv->rsp, 8);
> > +
> > +	expected = be32_to_cpup((__be32 *)&buf[2]);
> > +	if (expected > count || expected < TPM_HEADER_SIZE)
> >  		return -EIO;
> > 
> > -	memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6);
> > +	memcpy_fromio(&buf[8], &priv->rsp[8], expected - 8);
> > 
> >  	return expected;
> >  }
> > --
> > 2.19.1
> 

Thanks!

/Jarkko

  reply	other threads:[~2019-02-04 23:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-04 13:59 [PATCH v2] tpm/tpm_crb: Avoid unaligned reads in crb_recv() Jarkko Sakkinen
2019-02-04 17:12 ` David Laight
2019-02-04 23:19   ` Jarkko Sakkinen
2019-02-04 22:09 ` Winkler, Tomas
2019-02-04 23:24   ` Jarkko Sakkinen [this message]
     [not found] ` <20190207163157.DA4A62175B@mail.kernel.org>
2019-02-07 16:53   ` Jerry Snitselaar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190204232411.GA14992@linux.intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=jmorris@namei.org \
    --cc=jsnitsel@redhat.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tomas.winkler@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).