From: Borys Movchan <borysmn@axis.com>
To: Peter Huewe <peterhuewe@gmx.de>,
Jarkko Sakkinen <jarkko@kernel.org>,
Jason Gunthorpe <jgg@ziepe.ca>
Cc: <kernel@axis.com>, Borys Movchan <borysmn@axis.com>,
<linux-integrity@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH] tpm: Add Upgrade/Reduced mode support for TPM2 modules
Date: Mon, 19 Jul 2021 15:37:17 +0200 [thread overview]
Message-ID: <20210719133717.18797-1-borysmn@axis.com> (raw)
On some systems, especially embedded, TPM might start in
Upgrade/Reduced mode due to the previous failure of a firmware
upgrade process. Allow the TPM driver to handle such situations
properly. Enables a possibility for userspace application to
finalize TPM upgrade or recovery if required.
Signed-off-by: Borys Movchan <borysmn@axis.com>
---
drivers/char/tpm/tpm-chip.c | 23 +++++++++++++++--------
drivers/char/tpm/tpm2-cmd.c | 12 ++++++++++--
include/linux/tpm.h | 1 +
3 files changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index ddaeceb7e109..ff2367c447fb 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -574,20 +574,25 @@ static int tpm_get_pcr_allocation(struct tpm_chip *chip)
int tpm_chip_register(struct tpm_chip *chip)
{
int rc;
+ bool limited_mode = false;
rc = tpm_chip_start(chip);
if (rc)
return rc;
rc = tpm_auto_startup(chip);
- if (rc) {
+ if (rc == -EIO) {
+ limited_mode = true;
+ } else if (rc) {
tpm_chip_stop(chip);
return rc;
}
- rc = tpm_get_pcr_allocation(chip);
- tpm_chip_stop(chip);
- if (rc)
- return rc;
+ if (!limited_mode) {
+ rc = tpm_get_pcr_allocation(chip);
+ tpm_chip_stop(chip);
+ if (rc)
+ return rc;
+ }
tpm_sysfs_add_device(chip);
@@ -595,9 +600,11 @@ int tpm_chip_register(struct tpm_chip *chip)
tpm_add_ppi(chip);
- rc = tpm_add_hwrng(chip);
- if (rc)
- goto out_ppi;
+ if (!limited_mode) {
+ rc = tpm_add_hwrng(chip);
+ if (rc)
+ goto out_ppi;
+ }
rc = tpm_add_char_device(chip);
if (rc)
diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index a25815a6f625..7468353ed67d 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -718,7 +718,8 @@ static int tpm2_startup(struct tpm_chip *chip)
* sequence
* @chip: TPM chip to use
*
- * Returns 0 on success, < 0 in case of fatal error.
+ * Returns 0 on success, -ENODEV in case of fatal error,
+ * -EIO in case of Reduced/Upgrade mode
*/
int tpm2_auto_startup(struct tpm_chip *chip)
{
@@ -729,7 +730,10 @@ int tpm2_auto_startup(struct tpm_chip *chip)
goto out;
rc = tpm2_do_selftest(chip);
- if (rc && rc != TPM2_RC_INITIALIZE)
+ if (rc == TPM2_RC_UPGRADE) {
+ rc = -EIO;
+ goto out;
+ } else if (rc && rc != TPM2_RC_INITIALIZE)
goto out;
if (rc == TPM2_RC_INITIALIZE) {
@@ -743,6 +747,10 @@ int tpm2_auto_startup(struct tpm_chip *chip)
}
rc = tpm2_get_cc_attrs_tbl(chip);
+ if (rc) { /* Succeeded until here, but failed -> reduced mode */
+ rc = -EIO;
+ goto out;
+ }
out:
if (rc > 0)
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index aa11fe323c56..e873c42907f0 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -207,6 +207,7 @@ enum tpm2_return_codes {
TPM2_RC_INITIALIZE = 0x0100, /* RC_VER1 */
TPM2_RC_FAILURE = 0x0101,
TPM2_RC_DISABLED = 0x0120,
+ TPM2_RC_UPGRADE = 0x012D,
TPM2_RC_COMMAND_CODE = 0x0143,
TPM2_RC_TESTING = 0x090A, /* RC_WARN */
TPM2_RC_REFERENCE_H0 = 0x0910,
--
2.20.1
next reply other threads:[~2021-07-19 13:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-19 13:37 Borys Movchan [this message]
2021-07-27 2:58 ` [PATCH] tpm: Add Upgrade/Reduced mode support for TPM2 modules Jarkko Sakkinen
2021-07-28 11:06 ` Borys Movchan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210719133717.18797-1-borysmn@axis.com \
--to=borysmn@axis.com \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=kernel@axis.com \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).