From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Eric Auger <eric.auger@redhat.com>,
Alex Williamson <alex.williamson@redhat.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Liu@mail.linuxfoundation.org,
Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v3 06/16] iommu/vt-d: Add custom allocator for IOASID
Date: Fri, 3 May 2019 15:32:07 -0700 [thread overview]
Message-ID: <1556922737-76313-7-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1556922737-76313-1-git-send-email-jacob.jun.pan@linux.intel.com>
When VT-d driver runs in the guest, PASID allocation must be
performed via virtual command interface. This patch registers a
custom IOASID allocator which takes precedence over the default
XArray based allocator. The resulting IOASID allocation will always
come from the host. This ensures that PASID namespace is system-
wide.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
drivers/iommu/Kconfig | 1 +
drivers/iommu/intel-iommu.c | 60 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/intel-iommu.h | 2 ++
3 files changed, 63 insertions(+)
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 75e7f97..d565ef7 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -210,6 +210,7 @@ config INTEL_IOMMU_SVM
bool "Support for Shared Virtual Memory with Intel IOMMU"
depends on INTEL_IOMMU && X86
select PCI_PASID
+ select IOASID
select MMU_NOTIFIER
help
Shared Virtual Memory (SVM) provides a facility for devices
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index d93c4bd..fcc694a 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1711,6 +1711,8 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
if (ecap_prs(iommu->ecap))
intel_svm_finish_prq(iommu);
}
+ ioasid_unregister_allocator(&iommu->pasid_allocator);
+
#endif
}
@@ -4811,6 +4813,46 @@ static int __init platform_optin_force_iommu(void)
return 1;
}
+#ifdef CONFIG_INTEL_IOMMU_SVM
+static ioasid_t intel_ioasid_alloc(ioasid_t min, ioasid_t max, void *data)
+{
+ struct intel_iommu *iommu = data;
+ ioasid_t ioasid;
+
+ /*
+ * VT-d virtual command interface always uses the full 20 bit
+ * PASID range. Host can partition guest PASID range based on
+ * policies but it is out of guest's control.
+ */
+ if (min < PASID_MIN || max > PASID_MAX)
+ return -EINVAL;
+
+ if (vcmd_alloc_pasid(iommu, &ioasid))
+ return INVALID_IOASID;
+
+ return ioasid;
+}
+
+static void intel_ioasid_free(ioasid_t ioasid, void *data)
+{
+ struct iommu_pasid_alloc_info *svm;
+ struct intel_iommu *iommu = data;
+
+ if (!iommu)
+ return;
+ /*
+ * Sanity check the ioasid owner is done at upper layer, e.g. VFIO
+ * We can only free the PASID when all the devices are unbond.
+ */
+ svm = ioasid_find(NULL, ioasid, NULL);
+ if (!svm) {
+ pr_warn("Freeing unbond IOASID %d\n", ioasid);
+ return;
+ }
+ vcmd_free_pasid(iommu, ioasid);
+}
+#endif
+
int __init intel_iommu_init(void)
{
int ret = -ENODEV;
@@ -4912,6 +4954,24 @@ int __init intel_iommu_init(void)
"%s", iommu->name);
iommu_device_set_ops(&iommu->iommu, &intel_iommu_ops);
iommu_device_register(&iommu->iommu);
+#ifdef CONFIG_INTEL_IOMMU_SVM
+ if (cap_caching_mode(iommu->cap) && sm_supported(iommu)) {
+ /*
+ * Register a custom ASID allocator if we are running
+ * in a guest, the purpose is to have a system wide PASID
+ * namespace among all PASID users.
+ * There can be multiple vIOMMUs in each guest but only
+ * one allocator is active. All vIOMMU allocators will
+ * eventually be calling the same host allocator.
+ */
+ iommu->pasid_allocator.alloc = intel_ioasid_alloc;
+ iommu->pasid_allocator.free = intel_ioasid_free;
+ iommu->pasid_allocator.pdata = (void *)iommu;
+ ret = ioasid_register_allocator(&iommu->pasid_allocator);
+ if (ret)
+ pr_warn("Custom PASID allocator registeration failed\n");
+ }
+#endif
}
bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index bff907b..c24c8aa 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -31,6 +31,7 @@
#include <linux/iommu.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/dmar.h>
+#include <linux/ioasid.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
@@ -549,6 +550,7 @@ struct intel_iommu {
#ifdef CONFIG_INTEL_IOMMU_SVM
struct page_req_dsc *prq;
unsigned char prq_name[16]; /* Name for PRQ interrupt */
+ struct ioasid_allocator pasid_allocator; /* Custom allocator for PASIDs */
#endif
struct q_inval *qi; /* Queued invalidation info */
u32 *iommu_state; /* Store iommu states between suspend and resume.*/
--
2.7.4
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2019-05-03 22:30 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-03 22:32 [PATCH v3 00/16] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-05-03 22:32 ` [PATCH v3 01/16] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-05-03 22:32 ` [PATCH v3 02/16] iommu: Introduce cache_invalidate API Jacob Pan
2019-05-13 9:14 ` Auger Eric
2019-05-13 11:20 ` Jean-Philippe Brucker
2019-05-13 16:50 ` Auger Eric
2019-05-13 17:09 ` Jean-Philippe Brucker
2019-05-13 22:16 ` Jacob Pan
2019-05-14 7:36 ` Auger Eric
2019-05-14 10:41 ` Jean-Philippe Brucker
2019-05-14 17:44 ` Jacob Pan
2019-05-14 17:57 ` Jacob Pan
2019-05-15 11:03 ` Jean-Philippe Brucker
2019-05-15 14:47 ` Tian, Kevin
2019-05-15 15:25 ` Jean-Philippe Brucker
2019-05-14 7:46 ` Auger Eric
2019-05-14 10:42 ` Jean-Philippe Brucker
2019-05-14 11:02 ` Auger Eric
2019-05-14 17:55 ` Jacob Pan
2019-05-15 15:52 ` Jean-Philippe Brucker
2019-05-15 16:25 ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 03/16] iommu: Add I/O ASID allocator Jacob Pan
2019-05-21 8:21 ` Auger Eric
2019-05-21 17:03 ` Jacob Pan
2019-05-22 12:19 ` Jean-Philippe Brucker
2019-05-21 9:41 ` Auger Eric
2019-05-21 17:05 ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 04/16] ioasid: Add custom IOASID allocator Jacob Pan
2019-05-21 9:55 ` Auger Eric
2019-05-22 19:42 ` Jacob Pan
2019-05-23 7:14 ` Auger Eric
2019-05-23 15:40 ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 05/16] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-05-03 22:32 ` Jacob Pan [this message]
2019-05-03 22:32 ` [PATCH v3 07/16] iommu/vtd: Optimize tlb invalidation for vIOMMU Jacob Pan
2019-05-03 22:32 ` [PATCH v3 08/16] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-05-03 22:32 ` [PATCH v3 09/16] iommu: Introduce guest PASID bind function Jacob Pan
2019-05-16 14:14 ` Jean-Philippe Brucker
2019-05-16 16:14 ` Jacob Pan
2019-05-20 19:22 ` Jacob Pan
2019-05-21 16:09 ` Jean-Philippe Brucker
2019-05-21 22:50 ` Jacob Pan
2019-05-22 15:05 ` Jean-Philippe Brucker
2019-05-22 17:15 ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 10/16] iommu/vt-d: Move domain helper to header Jacob Pan
2019-05-03 22:32 ` [PATCH v3 11/16] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-05-03 22:32 ` [PATCH v3 12/16] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-05-03 22:32 ` [PATCH v3 13/16] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-05-03 22:32 ` [PATCH v3 14/16] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-05-03 22:32 ` [PATCH v3 15/16] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-05-03 22:32 ` [PATCH v3 16/16] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-05-15 16:31 ` [PATCH v3 00/16] Shared virtual address IOMMU and VT-d support Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556922737-76313-7-git-send-email-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan@linux.intel.com \
--cc=Liu@mail.linuxfoundation.org \
--cc=alex.williamson@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe.brucker@arm.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).