iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Alex Williamson <alex.williamson@redhat.com>
To: Liu Yi L <yi.l.liu@intel.com>
Cc: jean-philippe@linaro.org, kevin.tian@intel.com,
	ashok.raj@intel.com, kvm@vger.kernel.org,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	yi.y.sun@intel.com, hao.wu@intel.com, jun.j.tian@intel.com
Subject: Re: [PATCH v3 03/14] vfio/type1: Report iommu nesting info to userspace
Date: Thu, 2 Jul 2020 12:38:47 -0600	[thread overview]
Message-ID: <20200702123847.384e7460@x1.home> (raw)
In-Reply-To: <1592988927-48009-4-git-send-email-yi.l.liu@intel.com>

On Wed, 24 Jun 2020 01:55:16 -0700
Liu Yi L <yi.l.liu@intel.com> wrote:

> This patch exports iommu nesting capability info to user space through
> VFIO. User space is expected to check this info for supported uAPIs (e.g.
> PASID alloc/free, bind page table, and cache invalidation) and the vendor
> specific format information for first level/stage page table that will be
> bound to.
> 
> The nesting info is available only after the nesting iommu type is set
> for a container. Current implementation imposes one limitation - one
> nesting container should include at most one group. The philosophy of
> vfio container is having all groups/devices within the container share
> the same IOMMU context. When vSVA is enabled, one IOMMU context could
> include one 2nd-level address space and multiple 1st-level address spaces.
> While the 2nd-leve address space is reasonably sharable by multiple groups
> , blindly sharing 1st-level address spaces across all groups within the
> container might instead break the guest expectation. In the future sub/
> super container concept might be introduced to allow partial address space
> sharing within an IOMMU context. But for now let's go with this restriction
> by requiring singleton container for using nesting iommu features. Below
> link has the related discussion about this decision.
> 
> https://lkml.org/lkml/2020/5/15/1028
> 
> Cc: Kevin Tian <kevin.tian@intel.com>
> CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: Eric Auger <eric.auger@redhat.com>
> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> ---
>  drivers/vfio/vfio_iommu_type1.c | 73 +++++++++++++++++++++++++++++++++++++++++
>  include/uapi/linux/vfio.h       |  9 +++++
>  2 files changed, 82 insertions(+)
> 
> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
> index 7accb59..8c143d5 100644
> --- a/drivers/vfio/vfio_iommu_type1.c
> +++ b/drivers/vfio/vfio_iommu_type1.c
> @@ -72,6 +72,7 @@ struct vfio_iommu {
>  	uint64_t		pgsize_bitmap;
>  	bool			v2;
>  	bool			nesting;
> +	struct iommu_nesting_info *nesting_info;
>  	bool			dirty_page_tracking;
>  	bool			pinned_page_dirty_scope;
>  };

Mind the structure packing and alignment, placing a pointer in the
middle of a section of bools is going to create wasteful holes in the
data structure.

> @@ -130,6 +131,9 @@ struct vfio_regions {
>  #define IS_IOMMU_CAP_DOMAIN_IN_CONTAINER(iommu)	\
>  					(!list_empty(&iommu->domain_list))
>  
> +#define IS_DOMAIN_IN_CONTAINER(iommu)	((iommu->external_domain) || \
> +					 (!list_empty(&iommu->domain_list)))
> +
>  #define DIRTY_BITMAP_BYTES(n)	(ALIGN(n, BITS_PER_TYPE(u64)) / BITS_PER_BYTE)
>  
>  /*
> @@ -1959,6 +1963,12 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  		}
>  	}
>  
> +	/* Nesting type container can include only one group */
> +	if (iommu->nesting && IS_DOMAIN_IN_CONTAINER(iommu)) {
> +		mutex_unlock(&iommu->lock);
> +		return -EINVAL;
> +	}
> +
>  	group = kzalloc(sizeof(*group), GFP_KERNEL);
>  	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
>  	if (!group || !domain) {
> @@ -2029,6 +2039,36 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  	if (ret)
>  		goto out_domain;
>  
> +	/* Nesting cap info is available only after attaching */
> +	if (iommu->nesting) {
> +		struct iommu_nesting_info tmp;
> +		struct iommu_nesting_info *info;
> +
> +		/* First get the size of vendor specific nesting info */
> +		ret = iommu_domain_get_attr(domain->domain,
> +					    DOMAIN_ATTR_NESTING,
> +					    &tmp);
> +		if (ret)
> +			goto out_detach;
> +
> +		info = kzalloc(tmp.size, GFP_KERNEL);
> +		if (!info) {
> +			ret = -ENOMEM;
> +			goto out_detach;
> +		}
> +
> +		/* Now get the nesting info */
> +		info->size = tmp.size;
> +		ret = iommu_domain_get_attr(domain->domain,
> +					    DOMAIN_ATTR_NESTING,
> +					    info);
> +		if (ret) {
> +			kfree(info);
> +			goto out_detach;
> +		}
> +		iommu->nesting_info = info;
> +	}
> +
>  	/* Get aperture info */
>  	iommu_domain_get_attr(domain->domain, DOMAIN_ATTR_GEOMETRY, &geo);
>  
> @@ -2138,6 +2178,7 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  	return 0;
>  
>  out_detach:
> +	kfree(iommu->nesting_info);

This looks prone to a use-after-free.

>  	vfio_iommu_detach_group(domain, group);
>  out_domain:
>  	iommu_domain_free(domain->domain);
> @@ -2338,6 +2379,8 @@ static void vfio_iommu_type1_detach_group(void *iommu_data,
>  					vfio_iommu_unmap_unpin_all(iommu);
>  				else
>  					vfio_iommu_unmap_unpin_reaccount(iommu);
> +
> +				kfree(iommu->nesting_info);

As does this.  Set to NULL since get_info tests the pointer before
trying to use it.

>  			}
>  			iommu_domain_free(domain->domain);
>  			list_del(&domain->next);
> @@ -2546,6 +2589,30 @@ static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
>  	return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
>  }
>  
> +static int vfio_iommu_info_add_nesting_cap(struct vfio_iommu *iommu,
> +					   struct vfio_info_cap *caps)
> +{
> +	struct vfio_info_cap_header *header;
> +	struct vfio_iommu_type1_info_cap_nesting *nesting_cap;
> +	size_t size;
> +
> +	size = sizeof(*nesting_cap) + iommu->nesting_info->size;
> +
> +	header = vfio_info_cap_add(caps, size,
> +				   VFIO_IOMMU_TYPE1_INFO_CAP_NESTING, 1);
> +	if (IS_ERR(header))
> +		return PTR_ERR(header);
> +
> +	nesting_cap = container_of(header,
> +				   struct vfio_iommu_type1_info_cap_nesting,
> +				   header);
> +
> +	memcpy(&nesting_cap->info, iommu->nesting_info,
> +	       iommu->nesting_info->size);
> +
> +	return 0;
> +}
> +
>  static int vfio_iommu_type1_get_info(struct vfio_iommu *iommu,
>  				     unsigned long arg)
>  {
> @@ -2586,6 +2653,12 @@ static int vfio_iommu_type1_get_info(struct vfio_iommu *iommu,
>  	if (ret)
>  		return ret;
>  
> +	if (iommu->nesting_info) {
> +		ret = vfio_iommu_info_add_nesting_cap(iommu, &caps);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	if (caps.size) {
>  		info.flags |= VFIO_IOMMU_INFO_CAPS;
>  
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index eca66926..f1f39e1 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -14,6 +14,7 @@
>  
>  #include <linux/types.h>
>  #include <linux/ioctl.h>
> +#include <linux/iommu.h>

Why?  We're not directly referencing any IOMMU UAPI structures here.

>  
>  #define VFIO_API_VERSION	0
>  
> @@ -1039,6 +1040,14 @@ struct vfio_iommu_type1_info_cap_migration {
>  	__u64	max_dirty_bitmap_size;		/* in bytes */
>  };
>  
> +#define VFIO_IOMMU_TYPE1_INFO_CAP_NESTING  3
> +
> +struct vfio_iommu_type1_info_cap_nesting {
> +	struct	vfio_info_cap_header header;
> +	__u32	flags;

I think there's an alignment issue here for a uapi.  The header field is
8-bytes total and info[] should start at an 8-byte alignment to allow
data[] within info to have 8-byte alignment.  This could lead to the
structure having a compiler dependent size and offsets.  We should add
a 4-byte reserved field here to resolve.

> +	__u8	info[];
> +};

This should have a lot more description around it, a user could not
infer that info[] is including a struct iommu_nesting_info from the
information provided here.  Thanks,

Alex

> +
>  #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
>  
>  /**

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2020-07-02 18:39 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-24  8:55 [PATCH v3 00/14] vfio: expose virtual Shared Virtual Addressing to VMs Liu Yi L
2020-06-24  8:55 ` [PATCH v3 01/14] vfio/type1: Refactor vfio_iommu_type1_ioctl() Liu Yi L
2020-07-02 21:21   ` Alex Williamson
2020-07-03  3:46     ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 02/14] iommu: Report domain nesting info Liu Yi L
2020-06-26  7:47   ` Jean-Philippe Brucker
2020-06-26 16:04     ` Robin Murphy
2020-06-27  6:53       ` Liu, Yi L
2020-06-30  1:20         ` Tian, Kevin
2020-06-27  6:14     ` Liu, Yi L
2020-06-29  9:24   ` Stefan Hajnoczi
2020-06-29 12:23     ` Liu, Yi L
2020-06-30  2:00       ` Tian, Kevin
2020-06-30  3:45         ` Liu, Yi L
2020-07-03  9:59         ` Stefan Hajnoczi
2020-07-02 17:54   ` Alex Williamson
2020-07-03  3:53     ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 03/14] vfio/type1: Report iommu nesting info to userspace Liu Yi L
2020-07-02 18:38   ` Alex Williamson [this message]
2020-07-03  6:05     ` Liu, Yi L
2020-07-03 13:03       ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 04/14] vfio: Add PASID allocation/free support Liu Yi L
2020-07-02 21:17   ` Alex Williamson
2020-07-03  6:08     ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 05/14] iommu/vt-d: Support setting ioasid set to domain Liu Yi L
2020-06-24  8:55 ` [PATCH v3 06/14] vfio/type1: Add VFIO_IOMMU_PASID_REQUEST (alloc/free) Liu Yi L
2020-07-02 21:18   ` Alex Williamson
2020-07-03  6:28     ` Liu, Yi L
2020-07-08  8:16       ` Liu, Yi L
2020-07-08 19:54         ` Alex Williamson
2020-07-09  0:32           ` Liu, Yi L
2020-07-09  1:56             ` Tian, Kevin
2020-07-09  2:08               ` Liu, Yi L
2020-07-09  2:18                 ` Tian, Kevin
2020-07-09  2:26                   ` Liu, Yi L
2020-07-09  7:16                     ` Liu, Yi L
2020-07-09 14:27                       ` Alex Williamson
2020-07-09 18:05                         ` Jacob Pan
2020-07-10  5:39                         ` Liu, Yi L
2020-07-10 12:55                           ` Alex Williamson
2020-07-10 13:03                             ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 07/14] iommu: Pass domain to sva_unbind_gpasid() Liu Yi L
2020-06-24  8:55 ` [PATCH v3 08/14] iommu/vt-d: Check ownership for PASIDs from user-space Liu Yi L
2020-06-24  8:55 ` [PATCH v3 09/14] vfio/type1: Support binding guest page tables to PASID Liu Yi L
2020-07-02 21:19   ` Alex Williamson
2020-07-03  6:46     ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 10/14] vfio/type1: Allow invalidating first-level/stage IOMMU cache Liu Yi L
2020-07-02 21:19   ` Alex Williamson
2020-07-03  3:47     ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 11/14] vfio/type1: Add vSVA support for IOMMU-backed mdevs Liu Yi L
2020-06-24  8:55 ` [PATCH v3 12/14] vfio/pci: Expose PCIe PASID capability to guest Liu Yi L
2020-06-24  8:55 ` [PATCH v3 13/14] vfio: Document dual stage control Liu Yi L
2020-06-29  9:21   ` Stefan Hajnoczi
2020-06-29  9:24     ` Liu, Yi L
2020-06-24  8:55 ` [PATCH v3 14/14] iommu/vt-d: Support reporting nesting capability info Liu Yi L

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200702123847.384e7460@x1.home \
    --to=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=hao.wu@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.org \
    --cc=jun.j.tian@intel.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yi.l.liu@intel.com \
    --cc=yi.y.sun@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).