From: Qian Cai <cai@lca.pw>
To: jroedel@suse.de
Cc: iommu@lists.linux-foundation.org, will@kernel.org
Subject: [PATCH] iommu: fix use-after-free in iommu_release_device
Date: Fri, 3 Jul 2020 20:10:03 -0400 [thread overview]
Message-ID: <20200704001003.2303-1-cai@lca.pw> (raw)
In pci_disable_sriov(), i.e.,
# echo 0 > /sys/class/net/enp11s0f1np1/device/sriov_numvfs
iommu_release_device
iommu_group_remove_device
arm_smmu_domain_free
kfree(smmu_domain)
Later,
iommu_release_device
arm_smmu_release_device
arm_smmu_detach_dev
spin_lock_irqsave(&smmu_domain->devices_lock,
would trigger an use-after-free. Fixed it by call
arm_smmu_release_device() first before iommu_group_remove_device().
BUG: KASAN: use-after-free in __lock_acquire+0x3458/0x4440
__lock_acquire at kernel/locking/lockdep.c:4250
Read of size 8 at addr ffff0089df1a6f68 by task bash/3356
CPU: 5 PID: 3356 Comm: bash Not tainted 5.8.0-rc3-next-20200630 #2
Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
Call trace:
dump_backtrace+0x0/0x398
show_stack+0x14/0x20
dump_stack+0x140/0x1b8
print_address_description.isra.12+0x54/0x4a8
kasan_report+0x134/0x1b8
__asan_report_load8_noabort+0x2c/0x50
__lock_acquire+0x3458/0x4440
lock_acquire+0x204/0xf10
_raw_spin_lock_irqsave+0xf8/0x180
arm_smmu_detach_dev+0xd8/0x4a0
arm_smmu_detach_dev at drivers/iommu/arm-smmu-v3.c:2776
arm_smmu_release_device+0xb4/0x1c8
arm_smmu_disable_pasid at drivers/iommu/arm-smmu-v3.c:2754
(inlined by) arm_smmu_release_device at drivers/iommu/arm-smmu-v3.c:3000
iommu_release_device+0xc0/0x178
iommu_release_device at drivers/iommu/iommu.c:302
iommu_bus_notifier+0x118/0x160
notifier_call_chain+0xa4/0x128
__blocking_notifier_call_chain+0x70/0xa8
blocking_notifier_call_chain+0x14/0x20
device_del+0x618/0xa00
pci_remove_bus_device+0x108/0x2d8
pci_stop_and_remove_bus_device+0x1c/0x28
pci_iov_remove_virtfn+0x228/0x368
sriov_disable+0x8c/0x348
pci_disable_sriov+0x5c/0x70
mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core]
sriov_numvfs_store+0x240/0x318
dev_attr_store+0x38/0x68
sysfs_kf_write+0xdc/0x128
kernfs_fop_write+0x23c/0x448
__vfs_write+0x54/0xe8
vfs_write+0x124/0x3f0
ksys_write+0xe8/0x1b8
__arm64_sys_write+0x68/0x98
do_el0_svc+0x124/0x220
el0_sync_handler+0x260/0x408
el0_sync+0x140/0x180
Allocated by task 3356:
save_stack+0x24/0x50
__kasan_kmalloc.isra.13+0xc4/0xe0
kasan_kmalloc+0xc/0x18
kmem_cache_alloc_trace+0x1ec/0x318
arm_smmu_domain_alloc+0x54/0x148
iommu_group_alloc_default_domain+0xc0/0x440
iommu_probe_device+0x1c0/0x308
iort_iommu_configure+0x434/0x518
acpi_dma_configure+0xf0/0x128
pci_dma_configure+0x114/0x160
really_probe+0x124/0x6d8
driver_probe_device+0xc4/0x180
__device_attach_driver+0x184/0x1e8
bus_for_each_drv+0x114/0x1a0
__device_attach+0x19c/0x2a8
device_attach+0x10/0x18
pci_bus_add_device+0x70/0xf8
pci_iov_add_virtfn+0x7b4/0xb40
sriov_enable+0x5c8/0xc30
pci_enable_sriov+0x64/0x80
mlx5_core_sriov_configure+0x58/0x260 [mlx5_core]
sriov_numvfs_store+0x1c0/0x318
dev_attr_store+0x38/0x68
sysfs_kf_write+0xdc/0x128
kernfs_fop_write+0x23c/0x448
__vfs_write+0x54/0xe8
vfs_write+0x124/0x3f0
ksys_write+0xe8/0x1b8
__arm64_sys_write+0x68/0x98
do_el0_svc+0x124/0x220
el0_sync_handler+0x260/0x408
el0_sync+0x140/0x180
Freed by task 3356:
save_stack+0x24/0x50
__kasan_slab_free+0x124/0x198
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0x110/0x298
kfree+0x128/0x668
arm_smmu_domain_free+0xf4/0x1a0
iommu_group_release+0xec/0x160
kobject_put+0xf4/0x238
kobject_del+0x110/0x190
kobject_put+0x1e4/0x238
iommu_group_remove_device+0x394/0x938
iommu_release_device+0x9c/0x178
iommu_release_device at drivers/iommu/iommu.c:300
iommu_bus_notifier+0x118/0x160
notifier_call_chain+0xa4/0x128
__blocking_notifier_call_chain+0x70/0xa8
blocking_notifier_call_chain+0x14/0x20
device_del+0x618/0xa00
pci_remove_bus_device+0x108/0x2d8
pci_stop_and_remove_bus_device+0x1c/0x28
pci_iov_remove_virtfn+0x228/0x368
sriov_disable+0x8c/0x348
pci_disable_sriov+0x5c/0x70
mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core]
sriov_numvfs_store+0x240/0x318
dev_attr_store+0x38/0x68
sysfs_kf_write+0xdc/0x128
kernfs_fop_write+0x23c/0x448
__vfs_write+0x54/0xe8
vfs_write+0x124/0x3f0
ksys_write+0xe8/0x1b8
__arm64_sys_write+0x68/0x98
do_el0_svc+0x124/0x220
el0_sync_handler+0x260/0x408
el0_sync+0x140/0x180
The buggy address belongs to the object at ffff0089df1a6e00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 360 bytes inside of
512-byte region [ffff0089df1a6e00, ffff0089df1a7000)
The buggy address belongs to the page:
page:ffffffe02257c680 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0089df1a1400
flags: 0x7ffff800000200(slab)
raw: 007ffff800000200 ffffffe02246b8c8 ffffffe02257ff88 ffff000000320680
raw: ffff0089df1a1400 00000000002a000e 00000001ffffffff ffff0089df1a5001
page dumped because: kasan: bad access detected
page->mem_cgroup:ffff0089df1a5001
Memory state around the buggy address:
ffff0089df1a6e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff0089df1a6e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff0089df1a6f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff0089df1a6f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff0089df1a7000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: a6a4c7e2c5b8 ("iommu: Add probe_device() and release_device() call-backs")
Signed-off-by: Qian Cai <cai@lca.pw>
---
drivers/iommu/iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 1ed1e14a1f0c..0eeb3251266a 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -295,10 +295,10 @@ void iommu_release_device(struct device *dev)
return;
iommu_device_unlink(dev->iommu->iommu_dev, dev);
- iommu_group_remove_device(dev);
ops->release_device(dev);
+ iommu_group_remove_device(dev);
module_put(ops->owner);
dev_iommu_free(dev);
}
--
2.21.0 (Apple Git-122.2)
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
reply other threads:[~2020-07-04 0:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200704001003.2303-1-cai@lca.pw \
--to=cai@lca.pw \
--cc=iommu@lists.linux-foundation.org \
--cc=jroedel@suse.de \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).