iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	Koba Ko <koba.ko@canonical.com>,
	iommu@lists.linux-foundation.org
Subject: [PATCH 1/1] iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
Date: Tue, 21 Jul 2020 08:17:13 +0800	[thread overview]
Message-ID: <20200721001713.24282-1-baolu.lu@linux.intel.com> (raw)

The VT-d spec requires (10.4.4 Global Command Register, TE field) that:

Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before completing
the translation enable command and reflecting the status of the command
through the TES field in the Global Status register.

Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.

This provides a quirk list for those devices and skips TE disabling if
the qurik hits.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208363
Tested-by: Koba Ko <koba.ko@canonical.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/dmar.c  |  1 +
 drivers/iommu/intel/iommu.c | 27 +++++++++++++++++++++++++++
 include/linux/dmar.h        |  1 +
 include/linux/intel-iommu.h |  2 ++
 4 files changed, 31 insertions(+)

diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 683b812c5c47..16f47041f1bf 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1102,6 +1102,7 @@ static int alloc_iommu(struct dmar_drhd_unit *drhd)
 	}
 
 	drhd->iommu = iommu;
+	iommu->drhd = drhd;
 
 	return 0;
 
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 98390a6d8113..11418b14cc3f 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -356,6 +356,7 @@ static int intel_iommu_strict;
 static int intel_iommu_superpage = 1;
 static int iommu_identity_mapping;
 static int intel_no_bounce;
+static int iommu_skip_te_disable;
 
 #define IDENTMAP_GFX		2
 #define IDENTMAP_AZALIA		4
@@ -1633,6 +1634,10 @@ static void iommu_disable_translation(struct intel_iommu *iommu)
 	u32 sts;
 	unsigned long flag;
 
+	if (iommu_skip_te_disable && iommu->drhd->gfx_dedicated &&
+	    (cap_read_drain(iommu->cap) || cap_write_drain(iommu->cap)))
+		return;
+
 	raw_spin_lock_irqsave(&iommu->register_lock, flag);
 	iommu->gcmd &= ~DMA_GCMD_TE;
 	writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
@@ -4043,6 +4048,7 @@ static void __init init_no_remapping_devices(void)
 
 		/* This IOMMU has *only* gfx devices. Either bypass it or
 		   set the gfx_mapped flag, as appropriate */
+		drhd->gfx_dedicated = 1;
 		if (!dmar_map_gfx) {
 			drhd->ignored = 1;
 			for_each_active_dev_scope(drhd->devices,
@@ -6160,6 +6166,27 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_g
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);
 
+static void quirk_igfx_skip_te_disable(struct pci_dev *dev)
+{
+	unsigned short ver;
+
+	if (!IS_GFX_DEVICE(dev))
+		return;
+
+	ver = (dev->device >> 8) & 0xff;
+	if (ver != 0x45 && ver != 0x46 && ver != 0x4c &&
+	    ver != 0x4e && ver != 0x8a && ver != 0x98 &&
+	    ver != 0x9a)
+		return;
+
+	if (risky_device(dev))
+		return;
+
+	pci_info(dev, "Skip IOMMU disabling for graphics\n");
+	iommu_skip_te_disable = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_igfx_skip_te_disable);
+
 /* On Tylersburg chipsets, some BIOSes have been known to enable the
    ISOCH DMAR unit for the Azalia sound device, but not give it any
    TLB entries, which causes it to deadlock. Check for that.  We do
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index d7bf029df737..65565820328a 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -48,6 +48,7 @@ struct dmar_drhd_unit {
 	u16	segment;		/* PCI domain		*/
 	u8	ignored:1; 		/* ignore drhd		*/
 	u8	include_all:1;
+	u8	gfx_dedicated:1;	/* graphic dedicated	*/
 	struct intel_iommu *iommu;
 };
 
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index bf6009a344f5..329629e1e9de 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -600,6 +600,8 @@ struct intel_iommu {
 	struct iommu_device iommu;  /* IOMMU core code handle */
 	int		node;
 	u32		flags;      /* Software defined flags */
+
+	struct dmar_drhd_unit *drhd;
 };
 
 /* PCI domain-device relationship */
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

             reply	other threads:[~2020-07-21  0:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21  0:17 Lu Baolu [this message]
2020-07-21 14:44 ` [PATCH 1/1] iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu Limonciello, Mario
2020-07-21 23:06   ` Lu Baolu
2020-07-21 23:45     ` Limonciello, Mario
2020-07-23  1:38       ` Lu Baolu
2020-07-22 12:15 ` Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200721001713.24282-1-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=ashok.raj@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=koba.ko@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).