iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: will@kernel.org
Cc: bjorn.andersson@linaro.org, iommu@lists.linux-foundation.org,
	gregory.clement@bootlin.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/17] iommu/arm-smmu: Rework cb_base handling
Date: Thu, 15 Aug 2019 19:37:26 +0100	[thread overview]
Message-ID: <8856992662ff638e01fa7227cffb73fcff7bc5bb.1565892337.git.robin.murphy@arm.com> (raw)
In-Reply-To: <cover.1565892337.git.robin.murphy@arm.com>

To keep register-access quirks manageable, we want to structure things
to avoid needing too many individual overrides. It seems fairly clean to
have a single interface which handles both global and context registers
in terms of the architectural pages, so the first preparatory step is to
rework cb_base into a page number rather than an absolute address.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
 drivers/iommu/arm-smmu.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index a877de006d02..19126230c780 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -95,7 +95,7 @@
 #endif
 
 /* Translation context bank */
-#define ARM_SMMU_CB(smmu, n)	((smmu)->cb_base + ((n) << (smmu)->pgshift))
+#define ARM_SMMU_CB(smmu, n)	((smmu)->base + (((smmu)->numpage + (n)) << (smmu)->pgshift))
 
 #define MSI_IOVA_BASE			0x8000000
 #define MSI_IOVA_LENGTH			0x100000
@@ -168,8 +168,8 @@ struct arm_smmu_device {
 	struct device			*dev;
 
 	void __iomem			*base;
-	void __iomem			*cb_base;
-	unsigned long			pgshift;
+	unsigned int			numpage;
+	unsigned int			pgshift;
 
 #define ARM_SMMU_FEAT_COHERENT_WALK	(1 << 0)
 #define ARM_SMMU_FEAT_STREAM_MATCH	(1 << 1)
@@ -1815,7 +1815,7 @@ static int arm_smmu_id_size_to_bits(int size)
 
 static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
 {
-	unsigned long size;
+	unsigned int size;
 	void __iomem *gr0_base = ARM_SMMU_GR0(smmu);
 	u32 id;
 	bool cttw_reg, cttw_fw = smmu->features & ARM_SMMU_FEAT_COHERENT_WALK;
@@ -1899,7 +1899,7 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
 			return -ENOMEM;
 
 		dev_notice(smmu->dev,
-			   "\tstream matching with %lu register groups", size);
+			   "\tstream matching with %u register groups", size);
 	}
 	/* s2cr->type == 0 means translation, so initialise explicitly */
 	smmu->s2crs = devm_kmalloc_array(smmu->dev, size, sizeof(*smmu->s2crs),
@@ -1925,11 +1925,12 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
 
 	/* Check for size mismatch of SMMU address space from mapped region */
 	size = 1 << (FIELD_GET(ID1_NUMPAGENDXB, id) + 1);
-	size <<= smmu->pgshift;
-	if (smmu->cb_base != gr0_base + size)
+	if (smmu->numpage != 2 * size << smmu->pgshift)
 		dev_warn(smmu->dev,
-			"SMMU address space size (0x%lx) differs from mapped region size (0x%tx)!\n",
-			size * 2, (smmu->cb_base - gr0_base) * 2);
+			"SMMU address space size (0x%x) differs from mapped region size (0x%x)!\n",
+			2 * size << smmu->pgshift, smmu->numpage);
+	/* Now properly encode NUMPAGE to subsequently derive SMMU_CB_BASE */
+	smmu->numpage = size;
 
 	smmu->num_s2_context_banks = FIELD_GET(ID1_NUMS2CB, id);
 	smmu->num_context_banks = FIELD_GET(ID1_NUMCB, id);
@@ -2200,7 +2201,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 	smmu->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(smmu->base))
 		return PTR_ERR(smmu->base);
-	smmu->cb_base = smmu->base + resource_size(res) / 2;
+	/*
+	 * The resource size should effectively match the value of SMMU_TOP;
+	 * stash that temporarily until we know PAGESIZE to validate it with.
+	 */
+	smmu->numpage = resource_size(res);
 
 	num_irqs = 0;
 	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, num_irqs))) {
-- 
2.21.0.dirty

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2019-08-15 18:38 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-15 18:37 [PATCH v2 00/17] Arm SMMU refactoring Robin Murphy
2019-08-15 18:37 ` [PATCH v2 01/17] iommu/arm-smmu: Mask TLBI address correctly Robin Murphy
2019-08-15 18:37 ` [PATCH v2 02/17] iommu/qcom: Mask TLBI addresses correctly Robin Murphy
2019-08-15 18:37 ` [PATCH v2 03/17] iommu/arm-smmu: Convert GR0 registers to bitfields Robin Murphy
2019-08-15 18:37 ` [PATCH v2 04/17] iommu/arm-smmu: Convert GR1 " Robin Murphy
2019-08-15 18:37 ` [PATCH v2 05/17] iommu/arm-smmu: Convert context bank " Robin Murphy
2019-08-15 18:37 ` Robin Murphy [this message]
2019-08-15 18:37 ` [PATCH v2 07/17] iommu/arm-smmu: Split arm_smmu_tlb_inv_range_nosync() Robin Murphy
2019-08-15 18:37 ` [PATCH v2 08/17] iommu/arm-smmu: Get rid of weird "atomic" write Robin Murphy
2019-08-15 18:37 ` [PATCH v2 09/17] iommu/arm-smmu: Abstract GR1 accesses Robin Murphy
2019-08-15 18:37 ` [PATCH v2 10/17] iommu/arm-smmu: Abstract context bank accesses Robin Murphy
2019-08-15 18:37 ` [PATCH v2 11/17] iommu/arm-smmu: Abstract GR0 accesses Robin Murphy
2019-08-15 18:37 ` [PATCH v2 12/17] iommu/arm-smmu: Rename arm-smmu-regs.h Robin Murphy
2019-08-15 18:37 ` [PATCH v2 13/17] iommu/arm-smmu: Add implementation infrastructure Robin Murphy
2019-08-15 18:37 ` [PATCH v2 14/17] iommu/arm-smmu: Move Secure access quirk to implementation Robin Murphy
2019-08-15 18:37 ` [PATCH v2 15/17] iommu/arm-smmu: Add configuration implementation hook Robin Murphy
2019-08-15 18:37 ` [PATCH v2 16/17] iommu/arm-smmu: Add reset " Robin Murphy
2019-08-15 18:37 ` [PATCH v2 17/17] iommu/arm-smmu: Add context init " Robin Murphy
2019-08-20 10:15   ` Vivek Gautam
2019-08-20 13:00     ` Robin Murphy
2019-08-19 15:56 ` [PATCH v2 00/17] Arm SMMU refactoring Will Deacon
2019-08-19 18:10   ` Robin Murphy
2019-08-20  7:04     ` Will Deacon
2019-08-20  8:20 ` Vivek Gautam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8856992662ff638e01fa7227cffb73fcff7bc5bb.1565892337.git.robin.murphy@arm.com \
    --to=robin.murphy@arm.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=gregory.clement@bootlin.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).