linux-kernel-mentees.lists.linuxfoundation.org archive mirror
 help / color / mirror / Atom feed
From: Vaibhav Gupta <vaibhavgupta40@gmail.com>
To: Bjorn Helgaas <helgaas@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	bjorn@helgaas.com, Vaibhav Gupta <vaibhav.varodek@gmail.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	linux-kernel@vger.kernel.org,
	Vaibhav Gupta <vaibhavgupta40@gmail.com>
Subject: [Linux-kernel-mentees] [PATCH v1 5/6] [media] meye: use generic power management
Date: Mon, 29 Jun 2020 13:06:03 +0530	[thread overview]
Message-ID: <20200629073604.205478-6-vaibhavgupta40@gmail.com> (raw)
In-Reply-To: <20200629073604.205478-1-vaibhavgupta40@gmail.com>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was invoking PCI helper functions like pci_save/restore_state()
which is not recommended.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/media/pci/meye/meye.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/media/pci/meye/meye.c b/drivers/media/pci/meye/meye.c
index 73e064e6f56d..7fb3b1853b87 100644
--- a/drivers/media/pci/meye/meye.c
+++ b/drivers/media/pci/meye/meye.c
@@ -1528,19 +1528,16 @@ static const struct v4l2_ctrl_ops meye_ctrl_ops = {
 	.s_ctrl = meye_s_ctrl,
 };
 
-#ifdef CONFIG_PM
-static int meye_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused meye_suspend(struct device *dev)
 {
-	pci_save_state(pdev);
 	meye.pm_mchip_mode = meye.mchip_mode;
 	mchip_hic_stop();
 	mchip_set(MCHIP_MM_INTA, 0x0);
 	return 0;
 }
 
-static int meye_resume(struct pci_dev *pdev)
+static int __maybe_unused meye_resume(struct device *dev)
 {
-	pci_restore_state(pdev);
 	pci_write_config_word(meye.mchip_dev, MCHIP_PCI_SOFTRESET_SET, 1);
 
 	mchip_delay(MCHIP_HIC_CMD, 0);
@@ -1562,7 +1559,6 @@ static int meye_resume(struct pci_dev *pdev)
 	}
 	return 0;
 }
-#endif
 
 static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 {
@@ -1788,15 +1784,14 @@ static const struct pci_device_id meye_pci_tbl[] = {
 
 MODULE_DEVICE_TABLE(pci, meye_pci_tbl);
 
+static SIMPLE_DEV_PM_OPS(meye_pm_ops, meye_suspend, meye_resume);
+
 static struct pci_driver meye_driver = {
 	.name		= "meye",
 	.id_table	= meye_pci_tbl,
 	.probe		= meye_probe,
 	.remove		= meye_remove,
-#ifdef CONFIG_PM
-	.suspend	= meye_suspend,
-	.resume		= meye_resume,
-#endif
+	.driver.pm	= &meye_pm_ops,
 };
 
 static int __init meye_init(void)
-- 
2.27.0

_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees

  parent reply	other threads:[~2020-06-29  7:37 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-29  7:35 [Linux-kernel-mentees] [PATCH v1 0/6] [media] pci: use generic power management Vaibhav Gupta
2020-06-29  7:35 ` [Linux-kernel-mentees] [PATCH v1 1/6] [media] sta2x11: " Vaibhav Gupta
2020-06-29  7:36 ` [Linux-kernel-mentees] [PATCH v1 2/6] [media] cx23885: " Vaibhav Gupta
2020-07-13 10:01   ` Hans Verkuil
2020-07-14  0:38     ` Bjorn Helgaas
2020-07-14 10:52       ` Vaibhav Gupta
2020-06-29  7:36 ` [Linux-kernel-mentees] [PATCH v1 3/6] [media] cx25821: " Vaibhav Gupta
2020-07-13 10:03   ` Hans Verkuil
2020-06-29  7:36 ` [Linux-kernel-mentees] [PATCH v1 4/6] [media] cx88: " Vaibhav Gupta
2020-06-29  7:36 ` Vaibhav Gupta [this message]
2020-06-29  7:36 ` [Linux-kernel-mentees] [PATCH v1 6/6] [media] tw68: " Vaibhav Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200629073604.205478-6-vaibhavgupta40@gmail.com \
    --to=vaibhavgupta40@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=bjorn@helgaas.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=vaibhav.varodek@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).