From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org,
"Dan Murphy" <dmurphy@ti.com>,
linus.walleij@linaro.org, shawnguo@kernel.org,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Tony Lindgren" <tony@atomide.com>,
"Benoît Cousson" <bcousson@baylibre.com>
Subject: [PATCH v9 00/15] Multicolor Framework
Date: Wed, 25 Sep 2019 12:46:01 -0500 [thread overview]
Message-ID: <20190925174616.3714-1-dmurphy@ti.com> (raw)
Hello
For those I have added to this patchset this is a new LED framework that will
group monochrome LEDs into a directory under the parent LED class device. I have
CC'd you on this because you maintain a device tree file that contains one of
the devices affected by this change. Most notably the change is to add the
reg property to each LED child node to denote the output channel that the node
is to use. This not only is required for the Multicolor framework but also gives
flexibilty in DT design to be able to not be bound to sequential channel
numbering.
There are many changes from v8 to this patchset from Jacek's comments.
v8 series
https://lore.kernel.org/patchwork/project/lkml/list/?series=411331
Most notably
Removal of get/set_brightness ops
Dereferencing the monochrome LED intensity from the multicolor structure as
opposed to the ops.
Update for LP55xx DT properties to include the reg property to identify the
output channel for multicolor and non-multicolor use cases. This also allows
HW designers to skip output channels if they desire.
Updated the corresponding affect device tree files to add the reg property
Checkpatch error fixes for the lp55xx common
These changes were tested using the LP50xx evms and LP5523 EVM connected to a
BeagleBone black device.
Dan
Dan Murphy (15):
leds: multicolor: Add sysfs interface definition
dt: bindings: Add multicolor class dt bindings documention
dt-bindings: leds: Add multicolor ID to the color ID list
leds: Add multicolor ID to the color ID list
leds: multicolor: Introduce a multicolor class definition
dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
leds: lp50xx: Add the LP50XX family of the RGB LED driver
dt: bindings: lp55xx: Be consistent in the document with LED
dt: bindings: lp55xx: Update binding for Multicolor Framework
ARM: dts: n900: Add reg property to the LP5523 channel node
ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
leds: lp55xx: Update the lp55xx to use the multi color framework
leds: lp55xx: Fix checkpatch file permissions issues
leds: lp5523: Fix checkpatch issues in the code
.../ABI/testing/sysfs-class-led-multicolor | 35 +
.../bindings/leds/leds-class-multicolor.txt | 98 +++
.../devicetree/bindings/leds/leds-lp50xx.txt | 148 ++++
.../devicetree/bindings/leds/leds-lp55xx.txt | 105 ++-
Documentation/leds/index.rst | 1 +
Documentation/leds/leds-class-multicolor.rst | 96 +++
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 +
arch/arm/boot/dts/omap3-n900.dts | 11 +
arch/arm/boot/dts/ste-href.dtsi | 10 +
drivers/leds/Kconfig | 22 +
drivers/leds/Makefile | 2 +
drivers/leds/led-class-multicolor.c | 220 +++++
drivers/leds/led-core.c | 1 +
drivers/leds/leds-lp50xx.c | 767 ++++++++++++++++++
drivers/leds/leds-lp5523.c | 32 +-
drivers/leds/leds-lp55xx-common.c | 172 +++-
drivers/leds/leds-lp55xx-common.h | 11 +
include/dt-bindings/leds/common.h | 3 +-
include/linux/led-class-multicolor.h | 74 ++
include/linux/platform_data/leds-lp55xx.h | 6 +
20 files changed, 1771 insertions(+), 49 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor
create mode 100644 Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-lp50xx.txt
create mode 100644 Documentation/leds/leds-class-multicolor.rst
create mode 100644 drivers/leds/led-class-multicolor.c
create mode 100644 drivers/leds/leds-lp50xx.c
create mode 100644 include/linux/led-class-multicolor.h
--
2.22.0.214.g8dca754b1e
next reply other threads:[~2019-09-25 17:41 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-25 17:46 Dan Murphy [this message]
2019-09-25 17:46 ` [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition Dan Murphy
2019-09-25 20:58 ` Jacek Anaszewski
2019-09-26 11:10 ` Pavel Machek
2019-09-26 12:08 ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 02/15] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
2019-09-25 17:46 ` [PATCH v9 03/15] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2019-09-25 17:46 ` [PATCH v9 04/15] " Dan Murphy
2019-09-25 17:46 ` [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2019-09-25 21:12 ` Jacek Anaszewski
2019-09-26 11:52 ` Dan Murphy
2019-09-28 10:09 ` Jacek Anaszewski
2019-09-28 18:31 ` Jacek Anaszewski
2019-09-25 17:46 ` [PATCH v9 06/15] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2019-09-25 17:46 ` [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2019-09-25 21:27 ` Jacek Anaszewski
2019-09-26 11:59 ` Dan Murphy
2019-09-28 10:29 ` Jacek Anaszewski
2019-09-25 17:46 ` [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED Dan Murphy
2019-09-25 21:31 ` Jacek Anaszewski
2019-09-26 12:00 ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
2019-09-25 21:34 ` Jacek Anaszewski
2019-09-26 12:00 ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 10/15] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2019-09-25 17:46 ` [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2019-09-25 18:00 ` Fabio Estevam
2019-09-25 18:16 ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
2019-10-04 21:30 ` Linus Walleij
2019-09-25 17:46 ` [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework Dan Murphy
2019-09-25 22:00 ` Jacek Anaszewski
2019-09-26 12:02 ` Dan Murphy
2019-09-29 13:01 ` Jacek Anaszewski
2019-09-30 16:31 ` Dan Murphy
2019-09-30 20:34 ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 14/15] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
2019-09-25 17:46 ` [PATCH v9 15/15] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190925174616.3714-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=bcousson@baylibre.com \
--cc=festevam@gmail.com \
--cc=jacek.anaszewski@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).