From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Dan Murphy <dmurphy@ti.com>, robh+dt@kernel.org, pavel@ucw.cz
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-leds@vger.kernel.org
Subject: Re: [PATCH 1/2] dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver
Date: Tue, 8 Jan 2019 21:33:46 +0100 [thread overview]
Message-ID: <dc2283f9-db85-1eaf-f046-3fbbd4adcace@gmail.com> (raw)
In-Reply-To: <20181219162626.12297-2-dmurphy@ti.com>
Dan,
On 12/19/18 5:26 PM, Dan Murphy wrote:
> Introduce the bindings for the Texas Instruments LP5024 and the LP5018
> RGB LED device driver. The LP5024/18 can control RGB LEDs individually
> or as part of a control bank group. These devices have the ability
> to adjust the mixing control for the RGB LEDs to obtain different colors
> independent of the overall brightness of the LED grouping.
>
> Datasheet:
> http://www.ti.com/lit/ds/symlink/lp5024.pdf
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> .../devicetree/bindings/leds/leds-lp5024.txt | 63 +++++++++++++++++++
> 1 file changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-lp5024.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp5024.txt b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
> new file mode 100644
> index 000000000000..9567aa6f7813
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
> @@ -0,0 +1,63 @@
> +* Texas Instruments - LP5024/18 RGB LED driver
> +
> +The LM3692x is an ultra-compact, highly efficient,
> +white-LED driver designed for LCD display backlighting.
> +
> +The main difference between the LP5024 and L5018 is the number of
> +RGB LEDs they support. The LP5024 supports twenty four strings while the
> +LP5018 supports eighteen strings.
> +
> +Required properties:
> + - compatible:
> + "ti,lp5018"
> + "ti,lp5024"
> + - reg : I2C slave address
> + - #address-cells : 1
> + - #size-cells : 0
> +
> +Optional properties:
> + - enable-gpios : gpio pin to enable/disable the device.
> + - vled-supply : LED supply
> +
> +Required child properties:
> + - reg : Is the child node iteration.
> + - led-sources : LP5024 - 0 - 7
> + LP5018 - 0 - 5
> + Declares the LED string or strings that the child node
> + will control. If ti,control-bank is set then this
> + property will contain multiple LED IDs.
> +
> +Optional child properties:
> + - label : see Documentation/devicetree/bindings/leds/common.txt
> + - linux,default-trigger :
> + see Documentation/devicetree/bindings/leds/common.txt
> + - ti,control-bank : Indicates that the LED strings declared in the
> + led-sources property are grouped within a control
> + bank for brightness and mixing control.
> +
> +Example:
> +
> +led-controller@28 {
> + compatible = "ti,lp5024";
> + reg = <0x28>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> + vled-supply = <&vbatt>;
> +
> + led@0 {
> + reg = <0>;
> + led-sources = <1>;
> + };
> +
> + led@1 {
> + reg = <1>;
> + led-sources = <0 6>;
> + ti,control-bank;
Do you really need ti,control-bank? Doesn't led-sources array size
greater than 1 mean that the node describes control bank?
Also, does it make sense to have only two LEDs in the bank?
> + };
> +
> +}
> +
> +For more product information please see the link below:
> +http://www.ti.com/lit/ds/symlink/lp5024.pdf
>
--
Best regards,
Jacek Anaszewski
next prev parent reply other threads:[~2019-01-08 20:33 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-19 16:26 [PATCH 0/2] LP5024/18 LED introduction Dan Murphy
2018-12-19 16:26 ` [PATCH 1/2] dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver Dan Murphy
2018-12-28 23:53 ` Rob Herring
2018-12-31 18:54 ` Dan Murphy
2019-01-08 20:33 ` Jacek Anaszewski [this message]
2019-01-08 20:53 ` Dan Murphy
2019-01-08 21:16 ` Jacek Anaszewski
2019-01-08 21:22 ` Dan Murphy
2019-01-09 20:12 ` Jacek Anaszewski
2019-01-09 21:12 ` Dan Murphy
2019-01-09 21:28 ` Jacek Anaszewski
2019-01-09 21:31 ` Dan Murphy
2019-01-10 18:44 ` Jacek Anaszewski
2019-01-10 19:22 ` Dan Murphy
2019-01-10 19:57 ` Jacek Anaszewski
2019-01-10 20:43 ` Dan Murphy
2019-01-10 22:03 ` Jacek Anaszewski
2019-01-10 23:51 ` Dan Murphy
2019-01-11 12:38 ` Dan Murphy
2019-01-11 21:52 ` Jacek Anaszewski
2019-01-12 17:09 ` Dan Murphy
2019-01-12 19:48 ` Jacek Anaszewski
2019-01-14 12:27 ` Dan Murphy
2019-01-14 20:11 ` Jacek Anaszewski
2019-01-14 20:14 ` Dan Murphy
2019-01-14 20:28 ` Jacek Anaszewski
2019-01-14 20:29 ` Dan Murphy
2018-12-19 16:26 ` [PATCH 2/2] leds: lp5024: Add the LP5024/18 RGB LED driver Dan Murphy
2018-12-19 19:04 ` Dan Murphy
2018-12-19 19:34 ` Pavel Machek
2018-12-19 19:41 ` Dan Murphy
2018-12-19 20:10 ` Pavel Machek
2018-12-19 20:41 ` Dan Murphy
2018-12-19 21:36 ` Jacek Anaszewski
2018-12-19 21:50 ` Dan Murphy
2018-12-20 12:40 ` Vesa Jääskeläinen
2018-12-20 13:56 ` Dan Murphy
2019-01-01 13:45 ` Vesa Jääskeläinen
2019-01-03 22:05 ` Jacek Anaszewski
2019-01-03 23:19 ` Vesa Jääskeläinen
2019-01-03 23:34 ` Pavel Machek
2019-01-04 19:49 ` Vesa Jääskeläinen
2019-01-04 20:43 ` Pavel Machek
2019-01-04 19:12 ` Jacek Anaszewski
2019-01-04 20:12 ` Pavel Machek
2019-01-04 21:37 ` Jacek Anaszewski
2019-01-04 22:07 ` Pavel Machek
2019-01-05 12:16 ` Jacek Anaszewski
2019-01-05 12:31 ` Pavel Machek
2019-01-05 13:16 ` Jacek Anaszewski
2019-01-05 22:12 ` Generic RGB LED support was " Pavel Machek
2019-01-06 15:52 ` Jacek Anaszewski
2019-01-07 19:13 ` Jacek Anaszewski
2019-01-07 19:36 ` Dan Murphy
2019-01-07 20:59 ` Jacek Anaszewski
2019-01-07 21:14 ` Dan Murphy
2019-01-08 21:18 ` Jacek Anaszewski
2019-01-08 21:25 ` Dan Murphy
2019-01-10 12:46 ` Dan Murphy
2019-01-10 19:23 ` Jacek Anaszewski
2019-01-10 19:58 ` Dan Murphy
2019-01-10 21:02 ` Jacek Anaszewski
2019-01-10 21:07 ` Dan Murphy
2019-01-08 22:59 ` Pavel Machek
2019-01-09 7:11 ` Vesa Jääskeläinen
2019-01-13 16:37 ` Jacek Anaszewski
2019-01-05 0:39 ` Vesa Jääskeläinen
2019-01-07 19:34 ` Dan Murphy
2019-01-09 6:20 ` Vesa Jääskeläinen
2019-01-07 21:13 ` Jacek Anaszewski
2019-01-07 21:15 ` Dan Murphy
2019-01-09 6:46 ` Vesa Jääskeläinen
2019-01-13 16:36 ` Jacek Anaszewski
2018-12-20 20:31 ` Jacek Anaszewski
2018-12-21 7:32 ` Jacek Anaszewski
2018-12-21 13:05 ` Dan Murphy
2018-12-29 18:28 ` Jacek Anaszewski
2018-12-29 19:07 ` Pavel Machek
2018-12-30 17:09 ` Jacek Anaszewski
2018-12-30 17:35 ` Pavel Machek
2018-12-31 15:43 ` Jacek Anaszewski
2018-12-31 15:47 ` Jacek Anaszewski
2018-12-31 19:15 ` Dan Murphy
2019-01-01 14:42 ` Jacek Anaszewski
2019-01-01 18:11 ` Dan Murphy
2019-01-01 22:06 ` Jacek Anaszewski
2018-12-31 16:28 ` Pavel Machek
2019-01-01 14:26 ` Jacek Anaszewski
2018-12-19 22:03 ` Pavel Machek
2018-12-19 22:08 ` Dan Murphy
2018-12-19 22:27 ` Pavel Machek
2018-12-20 1:31 ` Dan Murphy
2018-12-20 9:06 ` Pavel Machek
2018-12-20 14:03 ` Dan Murphy
2019-01-08 21:10 ` Jacek Anaszewski
2019-01-08 21:17 ` Dan Murphy
2019-07-22 20:59 ` Backlight in motorola Droid 4 Pavel Machek
2019-07-23 15:53 ` Dan Murphy
2019-07-24 8:22 ` Pavel Machek
2019-07-24 12:45 ` Pavel Machek
2019-07-24 15:10 ` Dan Murphy
2019-07-24 15:22 ` Dan Murphy
2019-07-26 14:38 ` Dan Murphy
2019-07-29 22:00 ` Pavel Machek
2019-07-30 18:21 ` Dan Murphy
2019-07-30 21:52 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dc2283f9-db85-1eaf-f046-3fbbd4adcace@gmail.com \
--to=jacek.anaszewski@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).