Hello Lee,

On Wed, Apr 17, 2024 at 05:38:47PM +0200, Uwe Kleine-König wrote:
> On stm32mp1xx based machines (and others) a PWM consumer has to disable
> the PWM because an enabled PWM refuses to suspend. So check the
> LED_SUSPENDED flag and depending on that set the .enabled property.
> 
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218559
> Fixes: 76fe464c8e64 ("leds: pwm: Don't disable the PWM when the LED should be off")
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> Hello,
> 
> On Wed, Apr 17, 2024 at 03:49:43PM +0100, Lee Jones wrote:
> > On Tue, 16 Apr 2024, Uwe Kleine-König wrote:
> > > If you don't consider that suitable, I can create a patch that is easier
> > > to pick up.
> > 
> > Yes, please submit it properly.

Gentle ping. Even given the regression was introduced in v6.7-rc1
already, I think this should go into v6.9. If you don't agree that's
fine, but then getting it onto next to queue it for v6.10-rc1 at least
would be great.

Thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |