If you can't for some reasons succeed
can recover it with very low flat rates
BEWARE if one drive went failed and ALL the drives have the same age
nothing can guarantee that none of the other drives is worn too
the HINT is to clone all the drives as we do on regular base
then work with the clones
if you wanna exchange info's, the +39348******* number on the website has WhatsApp
Kind regards
Roberto G.
Technical Manager
Il giorno 3 nov 2021, alle ore 07:06, Adam Puleo <
adam.puleo@icloud.com> ha scritto:
Hello,
One of my drives failed in my RAID6 and I’m trying to replace it without success.
I’m trying to rebuild the failed drive (/dev/sda): lvchange --rebuild /dev/sda vg_data
But I’m receiving the error: vg_data/lv_data must be active to perform this operation.
I have tried to activate the logical volume without success.
How do I go about activating the volume so that I can rebuild the failed drive?
Thanks,
-Adam
# lvs -a -o name,segtype,devices
LV Type Devices
lv_data raid6 lv_data_rimage_0(0),lv_data_rimage_1(0),lv_data_rimage_2(0),lv_data_rimage_3(0),lv_data_rimage_4(0)
[lv_data_rimage_0] error
[lv_data_rimage_1] linear /dev/sdc1(1)
[lv_data_rimage_2] linear /dev/sdb1(1)
[lv_data_rimage_3] linear /dev/sdf1(1)
[lv_data_rimage_4] linear /dev/sde1(2)
[lv_data_rmeta_0] error
[lv_data_rmeta_1] linear /dev/sdc1(0)
[lv_data_rmeta_2] linear /dev/sdb1(0)
[lv_data_rmeta_3] linear /dev/sdf1(0)
[lv_data_rmeta_4] linear /dev/sde1(0)
# lvs -a
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv_data vg_data rwi---r--- 990.00g
[lv_data_rimage_0] vg_data vwi-a-r-r- 330.00g
[lv_data_rimage_1] vg_data Iwi-a-r-r- 330.00g
[lv_data_rimage_2] vg_data Iwi-a-r-r- 330.00g
[lv_data_rimage_3] vg_data Iwi-a-r-r- 330.00g
[lv_data_rimage_4] vg_data Iwi-a-r-r- 330.00g
[lv_data_rmeta_0] vg_data ewi-a-r-r- 4.00m
[lv_data_rmeta_1] vg_data ewi-a-r-r- 4.00m
[lv_data_rmeta_2] vg_data ewi-a-r-r- 4.00m
[lv_data_rmeta_3] vg_data ewi-a-r-r- 4.00m
[lv_data_rmeta_4] vg_data ewi-a-r-r- 4.00m
linux-lvm mailing list
linux-lvm@redhat.com
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/