linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	kieran.bingham@ideasonboard.com, linux-media@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH] media: rcar-csi2: Fix PHTW table values for E3/V3M
Date: Tue, 11 Dec 2018 03:01:15 +0100	[thread overview]
Message-ID: <20181211020115.GK17972@bigcity.dyn.berto.se> (raw)
In-Reply-To: <2063363.Wr8td8jMvS@avalon>

Hi Laurent,

Thanks for your feedback,

On 2018-12-10 22:16:52 +0200, Laurent Pinchart wrote:
> Hi Jacopo,
> 
> Thank you for the patch.
> 
> On Monday, 10 December 2018 16:53:55 EET Jacopo Mondi wrote:
> > The PHTW selection algorithm implemented in rcsi2_phtw_write_mbps() checks
> > for lower bound of the interval used to match the desired bandwidth. Use
> > that in place of the currently used upport bound.
> 
> The rcsi2_phtw_write_mbps() function performs the following (error handling 
> removed):
> 
>         const struct rcsi2_mbps_reg *value;
> 
>         for (value = values; value->mbps; value++)
>                 if (value->mbps >= mbps)
>                         break;
> 
>         return rcsi2_phtw_write(priv, value->reg, code);
> 
> With this patch, an mbps value of 85 will match the second entry in the 
> phtw_mbps_v3m_e3 table:
> 
> [0]	{ .mbps =   80, .reg = 0x00 },
> [1]	{ .mbps =   90, .reg = 0x20 },
> ...
> 
> The datasheet however documents the range 80-89 to map to 0x00.
> 
> What am I missing ?

I'm afraid you are missing a issue with the original implementation of 
the rcar-csi2 driver (my fault). The issue you point out is a problem 
with the current freq selection logic not the tables themself which 
needs to be corrected.

This patch aligns the table with the other tables in the driver and is 
sound. A patch (Jacopo care to submit it?) is needed to resolve the 
faulty logic in the driver. It should select the range according to 
Laurents findings and not the range above it as the current code does.

> 
> > Fixes: 10c08812fe60 ("media: rcar: rcar-csi2: Update V3M/E3 PHTW tables")
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  drivers/media/platform/rcar-vin/rcar-csi2.c | 62 ++++++++++++-------------
> >  1 file changed, 31 insertions(+), 31 deletions(-)
> > 
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > b/drivers/media/platform/rcar-vin/rcar-csi2.c index
> > 80ad906d1136..7e9cb8bcfe70 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -152,37 +152,37 @@ static const struct rcsi2_mbps_reg
> > phtw_mbps_h3_v3h_m3n[] = { };
> > 
> >  static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
> > -	{ .mbps =   89, .reg = 0x00 },
> > -	{ .mbps =   99, .reg = 0x20 },
> > -	{ .mbps =  109, .reg = 0x40 },
> > -	{ .mbps =  129, .reg = 0x02 },
> > -	{ .mbps =  139, .reg = 0x22 },
> > -	{ .mbps =  149, .reg = 0x42 },
> > -	{ .mbps =  169, .reg = 0x04 },
> > -	{ .mbps =  179, .reg = 0x24 },
> > -	{ .mbps =  199, .reg = 0x44 },
> > -	{ .mbps =  219, .reg = 0x06 },
> > -	{ .mbps =  239, .reg = 0x26 },
> > -	{ .mbps =  249, .reg = 0x46 },
> > -	{ .mbps =  269, .reg = 0x08 },
> > -	{ .mbps =  299, .reg = 0x28 },
> > -	{ .mbps =  329, .reg = 0x0a },
> > -	{ .mbps =  359, .reg = 0x2a },
> > -	{ .mbps =  399, .reg = 0x4a },
> > -	{ .mbps =  449, .reg = 0x0c },
> > -	{ .mbps =  499, .reg = 0x2c },
> > -	{ .mbps =  549, .reg = 0x0e },
> > -	{ .mbps =  599, .reg = 0x2e },
> > -	{ .mbps =  649, .reg = 0x10 },
> > -	{ .mbps =  699, .reg = 0x30 },
> > -	{ .mbps =  749, .reg = 0x12 },
> > -	{ .mbps =  799, .reg = 0x32 },
> > -	{ .mbps =  849, .reg = 0x52 },
> > -	{ .mbps =  899, .reg = 0x72 },
> > -	{ .mbps =  949, .reg = 0x14 },
> > -	{ .mbps =  999, .reg = 0x34 },
> > -	{ .mbps = 1049, .reg = 0x54 },
> > -	{ .mbps = 1099, .reg = 0x74 },
> > +	{ .mbps =   80, .reg = 0x00 },
> > +	{ .mbps =   90, .reg = 0x20 },
> > +	{ .mbps =  100, .reg = 0x40 },
> > +	{ .mbps =  110, .reg = 0x02 },
> > +	{ .mbps =  130, .reg = 0x22 },
> > +	{ .mbps =  140, .reg = 0x42 },
> > +	{ .mbps =  150, .reg = 0x04 },
> > +	{ .mbps =  170, .reg = 0x24 },
> > +	{ .mbps =  180, .reg = 0x44 },
> > +	{ .mbps =  200, .reg = 0x06 },
> > +	{ .mbps =  220, .reg = 0x26 },
> > +	{ .mbps =  240, .reg = 0x46 },
> > +	{ .mbps =  250, .reg = 0x08 },
> > +	{ .mbps =  270, .reg = 0x28 },
> > +	{ .mbps =  300, .reg = 0x0a },
> > +	{ .mbps =  330, .reg = 0x2a },
> > +	{ .mbps =  360, .reg = 0x4a },
> > +	{ .mbps =  400, .reg = 0x0c },
> > +	{ .mbps =  450, .reg = 0x2c },
> > +	{ .mbps =  500, .reg = 0x0e },
> > +	{ .mbps =  550, .reg = 0x2e },
> > +	{ .mbps =  600, .reg = 0x10 },
> > +	{ .mbps =  650, .reg = 0x30 },
> > +	{ .mbps =  700, .reg = 0x12 },
> > +	{ .mbps =  750, .reg = 0x32 },
> > +	{ .mbps =  800, .reg = 0x52 },
> > +	{ .mbps =  850, .reg = 0x72 },
> > +	{ .mbps =  900, .reg = 0x14 },
> > +	{ .mbps =  950, .reg = 0x34 },
> > +	{ .mbps = 1000, .reg = 0x54 },
> > +	{ .mbps = 1050, .reg = 0x74 },
> >  	{ .mbps = 1125, .reg = 0x16 },
> >  	{ /* sentinel */ },
> >  };
> 
> -- 
> Regards,
> 
> Laurent Pinchart
> 
> 
> 

-- 
Regards,
Niklas Söderlund

  reply	other threads:[~2018-12-11  2:01 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-10 14:53 [PATCH] media: rcar-csi2: Fix PHTW table values for E3/V3M Jacopo Mondi
2018-12-10 15:24 ` Niklas Söderlund
2018-12-10 20:16 ` Laurent Pinchart
2018-12-11  2:01   ` Niklas Söderlund [this message]
2018-12-11  7:49     ` Laurent Pinchart
2018-12-11 11:33     ` jacopo mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181211020115.GK17972@bigcity.dyn.berto.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).