From: Marco Felsch <m.felsch@pengutronix.de>
To: mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
sakari.ailus@linux.intel.com
Cc: devicetree@vger.kernel.org, p.zabel@pengutronix.de,
javierm@redhat.com, afshin.nasser@gmail.com,
laurent.pinchart@ideasonboard.com, linux-media@vger.kernel.org,
kernel@pengutronix.de
Subject: [PATCH v4 0/7] TVP5150 new features
Date: Tue, 29 Jan 2019 17:07:50 +0100 [thread overview]
Message-ID: <20190129160757.2314-1-m.felsch@pengutronix.de> (raw)
Hi,
this is the v4 of my TVP5150 series which adds the of_graph support.
Basically this series was just rebased on top of the media-tree/master
as mentioned by Mauro [1].
I dropped commit ("media: tvp5150: fix irq_request error path during
probe") since it was already applied and commit ("media: v4l2-subdev:
fix v4l2_subdev_get_try_* dependency") as mentioned by Sakari [2].
To have a quick overview I added the range-diff to the v3 below.
[1] https://www.spinics.net/lists/devicetree/msg262787.html
[2] https://www.spinics.net/lists/devicetree/msg249354.html
Javier Martinez Canillas (1):
partial revert of "[media] tvp5150: add HW input connectors support"
Marco Felsch (5):
media: tvp5150: add input source selection of_graph support
media: dt-bindings: tvp5150: Add input port connectors DT bindings
media: v4l2-subdev: add stubs for v4l2_subdev_get_try_*
media: tvp5150: add FORMAT_TRY support for get/set selection handlers
media: tvp5150: add s_power callback
Michael Tretter (1):
media: tvp5150: initialize subdev before parsing device tree
.../devicetree/bindings/media/i2c/tvp5150.txt | 92 ++-
drivers/media/i2c/tvp5150.c | 652 +++++++++++++-----
include/dt-bindings/media/tvp5150.h | 2 -
include/media/v4l2-subdev.h | 15 +-
4 files changed, 579 insertions(+), 182 deletions(-)
Range-diff against v3:
1: c3d26f4af009 ! 1: 4a35a7fb3a24 partial revert of "[media] tvp5150: add HW input connectors support"
@@ -21,6 +21,7 @@
[m.felsch@pengutronix.de: rm TVP5150_INPUT_NUM define]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+ Acked-by: Rob Herring <robh@kernel.org>
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
--- a/drivers/media/i2c/tvp5150.c
@@ -131,7 +132,7 @@
****************************************************************************/
@@
{
- struct v4l2_fwnode_endpoint bus_cfg;
+ struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
struct device_node *ep;
-#ifdef CONFIG_MEDIA_CONTROLLER
- struct device_node *connectors, *child;
2: 88f4c4a30a08 < -: ------------ media: tvp5150: fix irq_request error path during probe
3: 48b34c9c9e5f ! 2: f5ca703e5523 media: tvp5150: add input source selection of_graph support
@@ -21,6 +21,11 @@
---
Changelog:
+ v4:
+ - rebase on top of media_tree/master, fix merge conflict due to commit
+ 60359a28d592 ("media: v4l: fwnode: Initialise the V4L2 fwnode endpoints
+ to zero")
+
v3:
- probe(): s/err/err_free_v4l2_ctrls
- drop MC dependency for tvp5150_pads
@@ -49,13 +54,11 @@
#define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
enum tvp5150_pads {
-- TVP5150_PAD_IF_INPUT,
-- TVP5150_PAD_VID_OUT,
-- TVP5150_NUM_PADS
+- TVP5150_PAD_IF_INPUT,
+ TVP5150_PAD_AIP1A = TVP5150_COMPOSITE0,
+ TVP5150_PAD_AIP1B,
-+ TVP5150_PAD_VID_OUT,
-+ TVP5150_NUM_PADS
+ TVP5150_PAD_VID_OUT,
+ TVP5150_NUM_PADS
};
+#if defined(CONFIG_MEDIA_CONTROLLER)
@@ -345,7 +348,7 @@
+#if defined(CONFIG_MEDIA_CONTROLLER)
+static int tvp5150_add_of_connectors(struct tvp5150 *decoder)
{
-- struct v4l2_fwnode_endpoint bus_cfg;
+- struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
- struct device_node *ep;
- unsigned int flags;
- int ret = 0;
@@ -464,7 +467,7 @@
+static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
+{
+ struct device *dev = decoder->sd.dev;
-+ struct v4l2_fwnode_endpoint bus_cfg;
++ struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
+ struct device_node *ep_np;
+ unsigned int flags;
+ int ret, i = 0, in = 0;
4: 0b168180f4a4 ! 3: a7d06df79366 media: dt-bindings: tvp5150: Add input port connectors DT bindings
@@ -15,6 +15,7 @@
how the input connectors for these devices should be defined in a DT.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
+ Reviewed-by: Rob Herring <robh@kernel.org>
---
Changelog:
5: 871eb653fcf3 = 4: 860087e6c286 media: v4l2-subdev: add stubs for v4l2_subdev_get_try_*
6: fb141d6c8098 < -: ------------ media: v4l2-subdev: fix v4l2_subdev_get_try_* dependency
7: 795b4a45cb68 ! 5: fcd223cd1563 media: tvp5150: add FORMAT_TRY support for get/set selection handlers
@@ -13,6 +13,13 @@
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
+ ---
+ Changelog:
+
+ v4:
+ - fix merge conflict due to rebase on top of media-tree/master
+ - __tvp5150_get_pad_crop(): cosmetic alignment fixes
+
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -148,19 +155,19 @@
- regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
- regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
-- rect.top + rect.height - hmax);
+- rect.top + rect.height - hmax);
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
-- rect.left >> TVP5150_CROP_SHIFT);
+- rect.left >> TVP5150_CROP_SHIFT);
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
-- rect.left | (1 << TVP5150_CROP_SHIFT));
+- rect.left | (1 << TVP5150_CROP_SHIFT));
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
-- (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
-- TVP5150_CROP_SHIFT);
+- (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
+- TVP5150_CROP_SHIFT);
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
-- rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
-+ __crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
-+ sel->which);
-+
+- rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
++ __crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad, sel->which);
+
+- decoder->rect = rect;
+ /*
+ * Update output image size if the selection (crop) rectangle size or
+ * position has been modified.
@@ -168,8 +175,7 @@
+ if (!v4l2_rect_equal(&rect, __crop))
+ if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ __tvp5150_set_selection(sd, rect);
-
-- decoder->rect = rect;
++
+ *__crop = rect;
return 0;
@@ -183,14 +189,14 @@
-
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
- case V4L2_SEL_TGT_CROP_DEFAULT:
+ sel->r.left = 0;
@@
sel->r.height = TVP5150_V_MAX_OTHERS;
return 0;
case V4L2_SEL_TGT_CROP:
- sel->r = decoder->rect;
+ sel->r = *__tvp5150_get_pad_crop(decoder, cfg, sel->pad,
-+ sel->which);
++ sel->which);
return 0;
default:
return -EINVAL;
8: 8d88797ba94c = 6: 08cc83bcb513 media: tvp5150: initialize subdev before parsing device tree
9: b152e29bc83e = 7: 1249b386cce0 media: tvp5150: add s_power callback
--
2.20.1
next reply other threads:[~2019-01-29 16:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 16:07 Marco Felsch [this message]
2019-01-29 16:07 ` [PATCH v4 1/7] partial revert of "[media] tvp5150: add HW input connectors support" Marco Felsch
2019-01-29 16:07 ` [PATCH v4 2/7] media: tvp5150: add input source selection of_graph support Marco Felsch
2019-03-21 13:03 ` Jacopo Mondi
2019-03-27 16:22 ` Marco Felsch
2019-01-29 16:07 ` [PATCH v4 3/7] media: dt-bindings: tvp5150: Add input port connectors DT bindings Marco Felsch
2019-01-29 16:07 ` [PATCH v4 4/7] media: v4l2-subdev: add stubs for v4l2_subdev_get_try_* Marco Felsch
2019-03-21 10:01 ` Jacopo Mondi
2019-03-21 10:59 ` Marco Felsch
2019-01-29 16:07 ` [PATCH v4 5/7] media: tvp5150: add FORMAT_TRY support for get/set selection handlers Marco Felsch
2019-01-29 16:07 ` [PATCH v4 6/7] media: tvp5150: initialize subdev before parsing device tree Marco Felsch
2019-01-29 16:07 ` [PATCH v4 7/7] media: tvp5150: add s_power callback Marco Felsch
2019-02-12 16:09 ` [PATCH v4 0/7] TVP5150 new features Marco Felsch
2019-03-05 9:46 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190129160757.2314-1-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=afshin.nasser@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=javierm@redhat.com \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).