From: kholk11@gmail.com
To: mchehab@kernel.org
Cc: robh+dt@kernel.org, marijns95@gmail.com, konradybcio@gmail.com,
martin.botka1@gmail.com, devicetree@vger.kernel.org,
linux-media@vger.kernel.org, phone-devel@vger.kernel.org,
linux-kernel@vger.kernel.org,
AngeloGioacchino Del Regno <kholk11@gmail.com>
Subject: [PATCH 2/2] media: dt-bindings: media: i2c: Add IMX300 CMOS sensor binding
Date: Sun, 18 Oct 2020 14:31:06 +0200 [thread overview]
Message-ID: <20201018123106.14917-3-kholk11@gmail.com> (raw)
In-Reply-To: <20201018123106.14917-1-kholk11@gmail.com>
From: AngeloGioacchino Del Regno <kholk11@gmail.com>
Add YAML device tree binding for IMX300 CMOS image sensor, and
the relevant MAINTAINERS entries.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
.../devicetree/bindings/media/i2c/imx300.yaml | 115 ++++++++++++++++++
MAINTAINERS | 8 ++
2 files changed, 123 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx300.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/imx300.yaml b/Documentation/devicetree/bindings/media/i2c/imx300.yaml
new file mode 100644
index 000000000000..82fb19c5018c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx300.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.3-Inch 8Mpixel Stacked CMOS Digital Image Sensor
+
+maintainers:
+ - AngeloGioacchino Del Regno <kholk11@gmail.com>
+
+description: |-
+ The Sony IMX300 is a 1/2.3-inch Stacked CMOS (Exmor-RS) digital image
+ sensor with a pixel size of 1.08um and an active array size of
+ 5948H x 4140V. It is programmable through I2C interface at address 0x10.
+ Image data is sent through MIPI CSI-2, which is configured as either 2 or
+ 4 data lanes.
+
+properties:
+ compatible:
+ const: sony,imx300
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ VDIG-supply:
+ description:
+ Digital I/O voltage supply, 1.15-1.20 volts
+
+ VANA-supply:
+ description:
+ Analog voltage supply, 2.2 volts
+
+ VDDL-supply:
+ description:
+ Digital core voltage supply, 1.8 volts
+
+ reset-gpios:
+ description: |-
+ Reference to the GPIO connected to the xclr pin, if any.
+ Must be released (set high) after all supplies are applied.
+
+ # See ../video-interfaces.txt for more details
+ port:
+ type: object
+ properties:
+ endpoint:
+ type: object
+ properties:
+ data-lanes:
+ description: |-
+ The sensor supports either two-lane, or four-lane operation.
+ If this property is omitted four-lane operation is assumed.
+ For four-lane operation the property must be set to <0 1 2 3>.
+ items:
+ - const: 0
+ - const: 1
+ - const: 2
+ - const: 3
+
+ clock-noncontinuous:
+ type: boolean
+ description: |-
+ MIPI CSI-2 clock is non-continuous if this property is present,
+ otherwise it's continuous.
+
+ link-frequencies:
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies.
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - VANA-supply
+ - VDIG-supply
+ - VDDL-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx300: sensor@10 {
+ compatible = "sony,imx300";
+ reg = <0x10>;
+ clocks = <&imx300_xclk>;
+ VANA-supply = <&imx300_vana>; /* 2.2v */
+ VDIG-supply = <&imx300_vdig>; /* 1.2v */
+ VDDL-supply = <&imx300_vddl>; /* 1.8v */
+
+ port {
+ imx300_0: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ data-lanes = <0 1 2 3>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <780000000 480000000>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index c66710dd7e0a..231937d9d16a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16279,6 +16279,14 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/imx290.txt
F: drivers/media/i2c/imx290.c
+SONY IMX300 SENSOR DRIVER
+M: AngeloGioacchino Del Regno <kholk11@gmail.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/imx300.yaml
+F: drivers/media/i2c/imx300.c
+
SONY IMX319 SENSOR DRIVER
M: Bingbu Cao <bingbu.cao@intel.com>
L: linux-media@vger.kernel.org
--
2.28.0
next prev parent reply other threads:[~2020-10-18 12:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-18 12:31 [PATCH 0/2] Add support for the Sony Exmor-RS IMX300 camera sensor kholk11
2020-10-18 12:31 ` [PATCH 1/2] media: i2c: Add driver " kholk11
2020-10-26 8:57 ` Dan Carpenter
2020-10-18 12:31 ` kholk11 [this message]
2020-10-19 16:26 ` [PATCH 2/2] media: dt-bindings: media: i2c: Add IMX300 CMOS sensor binding Krzysztof Kozlowski
2020-10-26 13:33 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201018123106.14917-3-kholk11@gmail.com \
--to=kholk11@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marijns95@gmail.com \
--cc=martin.botka1@gmail.com \
--cc=mchehab@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).