messages from 2014-09-30 14:34:12 to 2014-10-06 02:41:39 UTC [more...]
cron job: media_tree daily build: WARNINGS
2014-10-06 2:41 UTC
leadtek dvb-t dongle dual not working if plugged in during boot via hub
2014-10-06 1:42 UTC
i.MX6 status for IPU/VPU/GPU
2014-10-06 1:03 UTC (13+ messages)
Upcoming v4l-utils 1.6.0 release
2014-10-06 0:25 UTC (7+ messages)
[PATCH 1/1] Kconfig: cosmetic improvement
2014-10-06 0:16 UTC (2+ messages)
spurious remote control events
2014-10-05 19:03 UTC
[PATCH 00/11] pt3: pci, tc90522, mxl301rf, qm1d1c0042
2014-10-05 17:08 UTC (18+ messages)
` [PATCH 01/11] tc90522: better chip description
` [PATCH 02/11] tc90522 is a client
` [PATCH 03/11] tc90522: use hardware algorithm & correct CNR
` [PATCH 04/11] pt3: add comment
` [PATCH 05/11] pt3: merge I2C & DMA handlers
` [PATCH 06/11] pt3: namespace cleanup
` [PATCH 07/11] mxl301rf: "
` [PATCH 08/11] qm1d1c0042: "
` [PATCH 09/11] mxl301rf: namespace cleanup & remodelling
` [PATCH 10/11] qm1d1c0042: "
` [PATCH 11/11] pt3: merge I2C & DMA handlers
[PATCH] pt3 (pci, tc90522, mxl301rf, qm1d1c0042): pt3_unregister_subdev(), pt3_unregister_subdev(), cleanups
2014-10-05 14:26 UTC (10+ messages)
[PATCH 1/3] [media] coda: Call v4l2_device_unregister() from a single location
2014-10-05 7:37 UTC (6+ messages)
` [PATCH 2/3] [media] coda: Unregister v4l2 upon alloc_workqueue() error
` [PATCH 3/3] [media] coda: Remove devm_kzalloc() error message
[PATCH] [media] gspca_touptek: Add support for ToupTek UCMOS series USB cameras
2014-10-05 6:43 UTC
cron job: media_tree daily build: WARNINGS
2014-10-05 2:42 UTC
[PATCH] Staging: media: Added semicolon
2014-10-04 18:43 UTC
Hauppauge HVR-5500, studder/lag with HD Channels
2014-10-04 11:23 UTC
[PATCH 0/14] pt3 (pci, tc90522, mxl301rf, qm1d1c0042) full diffs
2014-10-04 8:48 UTC
[PATCHv2 5/5] cx23855: add CI support for DVBSky T980C
2014-10-04 6:59 UTC
[PATCH 2/2] af9033: fix DVBv3 snr value not correct issue
2014-10-04 4:35 UTC (2+ messages)
[PATCH 1/2] af9033: fix DVBv3 signal strength value not correct issue
2014-10-04 4:26 UTC (2+ messages)
cron job: media_tree daily build: WARNINGS
2014-10-04 2:41 UTC
randconfig build error with next-20141003, in drivers/media/usb/gspca/gspca.c
2014-10-03 23:32 UTC
[PATCH 1/1] media: Print information on failed link validation
2014-10-03 21:40 UTC
[GIT PULL for v3.17] si2165 firmware changes
2014-10-03 20:04 UTC (2+ messages)
[coda6] Error while decoding second h.264 chunk
2014-10-03 13:34 UTC (3+ messages)
[PATCH RESEND] media: mantis: add remote control support
2014-10-03 13:06 UTC
[PATCH] pt3 (pci, tc90522, mxl301rf, qm1d1c0042): pt3_unregister_subdev(), pt3_unregister_subdev(), cleanups
2014-10-03 5:18 UTC
cron job: media_tree daily build: WARNINGS
2014-10-03 2:41 UTC
[PATCH] Staging: media: lirc: cleaned up packet dump in 2 files
2014-10-03 2:33 UTC
[PATCH] Fixed all coding style issues for drivers/staging/media/lirc/
2014-10-03 1:41 UTC (7+ messages)
color box, display box, corrugated box, color card, blister card, color sleeve, hang tag, label
2014-10-02 23:58 UTC
[PATCH 1/1] of: Add a function to read 64-bit arrays
2014-10-02 21:59 UTC
[GIT PULL FOR 3.18] smiapp, smiapp-pll improvements, fixes
2014-10-02 21:44 UTC
[GIT PULL for v3.17] media fixes
2014-10-02 21:10 UTC
[PATCH] [media] doc: fix broken v4l-utils URL
2014-10-02 20:45 UTC
[PATCH] v4l: uvcvideo: Fix buffer completion size check
2014-10-02 18:08 UTC (3+ messages)
FOSDEM15: Graphics DevRoom: call for speakers
2014-10-02 17:44 UTC
[PATCH v2 00/10] CODA7 JPEG support
2014-10-02 17:08 UTC (11+ messages)
` [PATCH v2 01/10] [media] coda: add support for planar YCbCr 4:2:2 (YUV422P) format
` [PATCH v2 02/10] [media] coda: identify platform device earlier
` [PATCH v2 03/10] [media] coda: add coda_video_device descriptors
` [PATCH v2 04/10] [media] coda: split out encoder control setup to specify controls per video device
` [PATCH v2 05/10] [media] coda: add JPEG register definitions for CODA7541
` [PATCH v2 06/10] [media] coda: add CODA7541 JPEG support
` [PATCH v2 07/10] [media] coda: store bitstream buffer position with buffer metadata
` [PATCH v2 08/10] [media] coda: pad input stream for JPEG decoder
` [PATCH v2 09/10] [media] coda: try to only queue a single JPEG into the bitstream
` [PATCH v2 10/10] [media] coda: allow userspace to set compressed buffer size in a certain range
[RFC PATCH] media: uvc: *HACK* workaround uvc unregister device *HACK*
2014-10-02 16:09 UTC
[RESEND PATCH] saa7146: Create a device name before it's used
2014-10-02 14:19 UTC
[PATCH v2] smiapp and smiapp-pll: more robust parameter handling, cleanups
2014-10-02 13:53 UTC (21+ messages)
` [PATCH v2 01/18] smiapp: Take mutex during PLL update in sensor initialisation
` [PATCH v2 02/18] smiapp-pll: Correct clock debug prints
` [PATCH v2 03/18] smiapp-pll: The clock tree values are unsigned --- fix "
` [PATCH v2 04/18] smiapp-pll: Separate bounds checking into a separate function
` [PATCH v2 05/18] smiapp-pll: External clock frequency isn't an output value
` [PATCH v2 06/18] smiapp-pll: Unify OP and VT PLL structs
` [PATCH v2 07/18] smiapp-pll: Calculate OP clocks only for sensors that have them
` [PATCH v2 08/18] smiapp-pll: Don't validate OP clocks if there are none
` [PATCH v2 09/18] smiapp: The PLL calculator handles sensors with VT clocks only
` [PATCH v2 10/18] smiapp: Remove validation of op_pix_clk_div
` [PATCH v2 11/18] smiapp-pll: Add pixel rate in pixel array as output parameters
` [PATCH v2 12/18] smiapp: Use actual pixel rate calculated by the PLL calculator
` [PATCH v2 13/18] smiapp: Split calculating PLL with sensor's limits from updating it
` [PATCH v2 14/18] smiapp: Gather information on valid link rate and BPP combinations
` [PATCH v2 15/18] smiapp: Take valid link frequencies into account in supported mbus codes
` [PATCH v2 16/18] smiapp: Clean up smiapp_set_format()
` [PATCH v2.1 "
` [PATCH v2 17/18] smiapp: Set valid link frequency range
` [PATCH v2 18/18] smiapp: Update PLL when setting format
[PATCH] [media] s5p-fimc: Only build suspend/resume for PM
2014-10-02 13:50 UTC (3+ messages)
[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver
2014-10-02 12:16 UTC
[PATCH] Fixed all coding style issues for drivers/staging/media/lirc/
2014-10-02 8:13 UTC (3+ messages)
[PATCH] [media] s5p-jpeg: Only build suspend/resume for PM
2014-10-02 7:21 UTC
<Reply>
2014-10-01 1:50 UTC
cx231xx: Use muxed i2c adapters instead of custom switching
2014-10-02 5:34 UTC (16+ messages)
` [PATCH V3 01/13] cx231xx: let i2c bus scanning use its own i2c_client
` [PATCH V3 02/13] cx231xx: use own i2c_client for eeprom access
` [PATCH V3 03/13] cx231xx: delete i2c_client per bus
` [PATCH V3 04/13] cx231xx: give each master i2c bus a seperate name
` [PATCH V3 05/13] cx231xx: Modifiy the symbolic constants for i2c ports and describe
` [PATCH V3 06/13] cx231xx: Use symbolic constants for i2c ports instead of numbers
` [PATCH V3 07/13] cx231xx: add wrapper to get the i2c_adapter pointer
` [PATCH V3 08/13] cx231xx: remember status of i2c port_3 switch
` [PATCH V3 09/13] cx231xx: let is_tuner check the real i2c port and not the i2c master number
` [PATCH V3 10/13] cx231xx: change usage of I2C_1 to the real i2c port
` [PATCH V3 11/13] cx231xx: register i2c mux adapters for master1 and use as I2C_1_MUX_1 and I2C_1_MUX_3
` [PATCH V3 12/13] cx231xx: drop unconditional port3 switching
` [PATCH V3 13/13] cx231xx: scan all four existing i2c busses instead of the 3 masters
[PATCH V2 00/13] cx231xx: Use muxed i2c adapters instead of custom switching
2014-10-02 5:16 UTC (24+ messages)
` [PATCH V2 01/13] cx231xx: let i2c bus scanning use its own i2c_client
` [PATCH V2 02/13] cx231xx: use own i2c_client for eeprom access
` [PATCH V2 03/13] cx231xx: delete i2c_client per bus
` [PATCH V2 04/13] cx231xx: give each master i2c bus a seperate name
` [PATCH V2 05/13] cx231xx: Modifiy the symbolic constants for i2c ports and describe
` [PATCH V2 06/13] cx231xx: Use symbolic constants for i2c ports instead of numbers
` [PATCH V2 07/13] cx231xx: add wrapper to get the i2c_adapter pointer
` [PATCH V2 08/13] cx231xx: remember status of i2c port_3 switch
` [PATCH V2 09/13] cx231xx: let is_tuner check the real i2c port and not the i2c master number
` [PATCH V2 10/13] cx231xx: change usage of I2C_1 to the real i2c port
` [PATCH V2 11/13] cx231xx: register i2c mux adapters for master1 and use as I2C_1_MUX_1 and I2C_1_MUX_3
` [PATCH V2 12/13] cx231xx: drop unconditional port3 switching
` [PATCH V2 13/13] cx231xx: scan all four existing i2c busses instead of the 3 masters
cron job: media_tree daily build: WARNINGS
2014-10-02 2:42 UTC
randconfig build error with next-20141001, in drivers/i2c/algos/i2c-algo-bit.c
2014-10-01 23:26 UTC
[PATCH 3/5] [media] pwc-if: fix build warning when !CONFIG_USB_PWC_INPUT_EVDEV
2014-10-01 23:10 UTC
[PATCH 1/5] cx23855: add support for DVBSky T980C (no CI support)
2014-10-01 20:16 UTC (10+ messages)
` [PATCH 2/5] sp2: fix incorrect struct
` [PATCH 3/5] sp2: improve debug logging
` [PATCH 4/5] cx23885: add I2C client for CI into state and handle unregistering
` [PATCH 5/5] cx23855: add CI support for DVBSky T980C
[PATCH] cx23885: initialize config structs for T9580
2014-10-01 19:51 UTC (2+ messages)
randconfig build error with next-20141001, in drivers/media/platform/s5p-tv/hdmiphy_drv.c
2014-10-01 18:59 UTC
[PATCH] pt3 (PCI, tc90522, mxl301rf, qm1d1c0042): pt3_unregister_subdev(), pt3_unregister_subdev(),
2014-10-01 18:58 UTC
Tevii S480 on Unicable SCR System
2014-10-01 18:42 UTC
[PATCH 00/10] CODA7 JPEG support
2014-10-01 15:40 UTC (7+ messages)
uvcvideo fails on 3.16 and 3.17 kernels
2014-10-01 12:07 UTC (7+ messages)
Dell XPS 12 Camera issues
2014-10-01 8:46 UTC (2+ messages)
[PATCH V2 1/2] get_dvb_firmware: si2165: drop the extra header from the firmware
2014-10-01 6:01 UTC (3+ messages)
` [PATCH V2 2/2] si2165: do load firmware without extra header
cron job: media_tree daily build: WARNINGS
2014-10-01 2:42 UTC
[PATCH 0/3] libdvbv5: Remove broken descriptor parsers
2014-10-01 0:38 UTC (5+ messages)
` [PATCH 1/3] libdvbv5: Add todo file
` [PATCH 2/3] libdvbv5: remove service_location descriptor
` [PATCH 3/3] libdvbv5: remove service_list descriptor
[PATCH v2 0/5] video: describe data bus formats
2014-09-30 21:00 UTC (4+ messages)
` [PATCH v2 1/5] video: move mediabus format definition to a more standard place
saa7146_wait_for_debi_done_sleep timed out
2014-09-30 17:21 UTC
[PATCH 0/6] some fixes and cleanups for the em28xx-based HVR-930C
2014-09-30 14:43 UTC (7+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).