From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo@jmondi.org>
Cc: Steve Longerbeam <slongerbeam@gmail.com>,
sakari.ailus@iki.fi, hverkuil-cisco@xs4all.nl,
mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
festevam@gmail.com, Eugen.Hristev@microchip.com,
jbrunet@baylibre.com, Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org
Subject: Re: [PATCH 02/21] media: ov5604: Re-arrange modes definition
Date: Tue, 1 Feb 2022 16:20:06 +0200 [thread overview]
Message-ID: <YflBlm7aeslZW4es@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220131143245.128089-3-jacopo@jmondi.org>
Hi Jacopo,
Thank you for the patch.
On Mon, Jan 31, 2022 at 03:32:26PM +0100, Jacopo Mondi wrote:
> The array of supported modes is close to unreadable.
> Re-arrange it giving it some room to breath.
>
> Cosmetic change only.
>
> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
> ---
> drivers/media/i2c/ov5640.c | 141 +++++++++++++++++++++----------------
> 1 file changed, 81 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index d915c9652302..7e7732f30486 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -615,66 +615,87 @@ static const struct ov5640_mode_info ov5640_mode_init_data = {
>
> static const struct ov5640_mode_info
> ov5640_mode_data[OV5640_NUM_MODES] = {
> - {OV5640_MODE_QQVGA_160_120, SUBSAMPLING,
> - OV5640_PIXEL_RATE_48M,
> - 160, 1896, 120, 984,
> - ov5640_setting_QQVGA_160_120,
> - ARRAY_SIZE(ov5640_setting_QQVGA_160_120),
> - OV5640_30_FPS},
> - {OV5640_MODE_QCIF_176_144, SUBSAMPLING,
> - OV5640_PIXEL_RATE_48M,
> - 176, 1896, 144, 984,
> - ov5640_setting_QCIF_176_144,
> - ARRAY_SIZE(ov5640_setting_QCIF_176_144),
> - OV5640_30_FPS},
> - {OV5640_MODE_QVGA_320_240, SUBSAMPLING,
> - OV5640_PIXEL_RATE_48M,
> - 320, 1896, 240, 984,
> - ov5640_setting_QVGA_320_240,
> - ARRAY_SIZE(ov5640_setting_QVGA_320_240),
> - OV5640_30_FPS},
> - {OV5640_MODE_VGA_640_480, SUBSAMPLING,
> - OV5640_PIXEL_RATE_48M,
> - 640, 1896, 480, 1080,
> - ov5640_setting_VGA_640_480,
> - ARRAY_SIZE(ov5640_setting_VGA_640_480),
> - OV5640_60_FPS},
> - {OV5640_MODE_NTSC_720_480, SUBSAMPLING,
> - OV5640_PIXEL_RATE_96M,
> - 720, 1896, 480, 984,
> - ov5640_setting_NTSC_720_480,
> - ARRAY_SIZE(ov5640_setting_NTSC_720_480),
> - OV5640_30_FPS},
> - {OV5640_MODE_PAL_720_576, SUBSAMPLING,
> - OV5640_PIXEL_RATE_96M,
> - 720, 1896, 576, 984,
> - ov5640_setting_PAL_720_576,
> - ARRAY_SIZE(ov5640_setting_PAL_720_576),
> - OV5640_30_FPS},
> - {OV5640_MODE_XGA_1024_768, SUBSAMPLING,
> - OV5640_PIXEL_RATE_96M,
> - 1024, 1896, 768, 1080,
> - ov5640_setting_XGA_1024_768,
> - ARRAY_SIZE(ov5640_setting_XGA_1024_768),
> - OV5640_30_FPS},
> - {OV5640_MODE_720P_1280_720, SUBSAMPLING,
> - OV5640_PIXEL_RATE_124M,
> - 1280, 1892, 720, 740,
> - ov5640_setting_720P_1280_720,
> - ARRAY_SIZE(ov5640_setting_720P_1280_720),
> - OV5640_30_FPS},
> - {OV5640_MODE_1080P_1920_1080, SCALING,
> - OV5640_PIXEL_RATE_148M,
> - 1920, 2500, 1080, 1120,
> - ov5640_setting_1080P_1920_1080,
> - ARRAY_SIZE(ov5640_setting_1080P_1920_1080),
> - OV5640_30_FPS},
> - {OV5640_MODE_QSXGA_2592_1944, SCALING,
> - OV5640_PIXEL_RATE_168M,
> - 2592, 2844, 1944, 1968,
> - ov5640_setting_QSXGA_2592_1944,
> - ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944),
> - OV5640_15_FPS},
> + {
> + /* 160x120 */
> + OV5640_MODE_QQVGA_160_120, SUBSAMPLING,
> + OV5640_PIXEL_RATE_48M,
> + 160, 1896, 120, 984,
> + ov5640_setting_QQVGA_160_120,
> + ARRAY_SIZE(ov5640_setting_QQVGA_160_120),
> + OV5640_30_FPS
You can add a comma at the end here while at it.
That's definitely more readable. Should we go one step further?
.id = OV5640_MODE_QQVGA_160_120,
.dn_mode = SUBSAMPLING,
.pixel_rate = OV5640_PIXEL_RATE_48M,
.hact = 160,
.htot = 1896,
.vact = 120,
.vtot = 984,
.reg_data = ov5640_setting_QQVGA_160_120,
.reg_data_szize = ARRAY_SIZE(ov5640_setting_QQVGA_160_120),
.max_fps = OV5640_30_FPS,
Up to you.
I trust that you've automated this change and that if the first entry is
correct, all the other ones are as well :-)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + }, {
> + /* 176x144 */
> + OV5640_MODE_QCIF_176_144, SUBSAMPLING,
> + OV5640_PIXEL_RATE_48M,
> + 176, 1896, 144, 984,
> + ov5640_setting_QCIF_176_144,
> + ARRAY_SIZE(ov5640_setting_QCIF_176_144),
> + OV5640_30_FPS
> + }, {
> + /* 320x240 */
> + OV5640_MODE_QVGA_320_240, SUBSAMPLING,
> + OV5640_PIXEL_RATE_48M,
> + 320, 1896, 240, 984,
> + ov5640_setting_QVGA_320_240,
> + ARRAY_SIZE(ov5640_setting_QVGA_320_240),
> + OV5640_30_FPS
> + }, {
> + /* 640x480 */
> + OV5640_MODE_VGA_640_480, SUBSAMPLING,
> + OV5640_PIXEL_RATE_48M,
> + 640, 1896, 480, 1080,
> + ov5640_setting_VGA_640_480,
> + ARRAY_SIZE(ov5640_setting_VGA_640_480),
> + OV5640_60_FPS
> + }, {
> + /* 720x480 */
> + OV5640_MODE_NTSC_720_480, SUBSAMPLING,
> + OV5640_PIXEL_RATE_96M,
> + 720, 1896, 480, 984,
> + ov5640_setting_NTSC_720_480,
> + ARRAY_SIZE(ov5640_setting_NTSC_720_480),
> + OV5640_30_FPS
> + }, {
> + /* 720x576 */
> + OV5640_MODE_PAL_720_576, SUBSAMPLING,
> + OV5640_PIXEL_RATE_96M,
> + 720, 1896, 576, 984,
> + ov5640_setting_PAL_720_576,
> + ARRAY_SIZE(ov5640_setting_PAL_720_576),
> + OV5640_30_FPS
> + }, {
> + /* 1024x768 */
> + OV5640_MODE_XGA_1024_768, SUBSAMPLING,
> + OV5640_PIXEL_RATE_96M,
> + 1024, 1896, 768, 1080,
> + ov5640_setting_XGA_1024_768,
> + ARRAY_SIZE(ov5640_setting_XGA_1024_768),
> + OV5640_30_FPS
> + }, {
> + /* 1280x720 */
> + OV5640_MODE_720P_1280_720, SUBSAMPLING,
> + OV5640_PIXEL_RATE_124M,
> + 1280, 1892, 720, 740,
> + ov5640_setting_720P_1280_720,
> + ARRAY_SIZE(ov5640_setting_720P_1280_720),
> + OV5640_30_FPS
> + }, {
> + /* 1920x1080 */
> + OV5640_MODE_1080P_1920_1080, SCALING,
> + OV5640_PIXEL_RATE_148M,
> + 1920, 2500, 1080, 1120,
> + ov5640_setting_1080P_1920_1080,
> + ARRAY_SIZE(ov5640_setting_1080P_1920_1080),
> + OV5640_30_FPS
> + }, {
> + /* 2592x1944 */
> + OV5640_MODE_QSXGA_2592_1944, SCALING,
> + OV5640_PIXEL_RATE_168M,
> + 2592, 2844, 1944, 1968,
> + ov5640_setting_QSXGA_2592_1944,
> + ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944),
> + OV5640_15_FPS
> + },
> };
>
> static int ov5640_init_slave_id(struct ov5640_dev *sensor)
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-02-01 14:20 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-31 14:32 [PATCH 00/17] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
2022-01-31 14:32 ` [PATCH 01/21] media: ov5640: Add pixel rate to modes Jacopo Mondi
2022-02-01 14:52 ` Laurent Pinchart
2022-01-31 14:32 ` [PATCH 02/21] media: ov5604: Re-arrange modes definition Jacopo Mondi
2022-02-01 14:20 ` Laurent Pinchart [this message]
2022-01-31 14:32 ` [PATCH 03/21] media: ov5640: Add is_mipi() function Jacopo Mondi
2022-02-01 14:25 ` Laurent Pinchart
2022-01-31 14:32 ` [PATCH 04/21] media: ov5640: Associate bpp with formats Jacopo Mondi
2022-02-01 14:27 ` Laurent Pinchart
2022-01-31 14:32 ` [PATCH 05/21] media: ov5640: Update pixel_rate and link_freq Jacopo Mondi
2022-02-01 16:52 ` Laurent Pinchart
2022-01-31 14:32 ` [PATCH 06/21] media: ov5640: Rework CSI-2 clock tree Jacopo Mondi
2022-02-01 17:27 ` Laurent Pinchart
2022-02-07 14:07 ` Jacopo Mondi
2022-01-31 14:32 ` [PATCH 07/21] media: ov5640: Rework timings programming Jacopo Mondi
2022-02-01 19:03 ` Laurent Pinchart
2022-02-07 14:37 ` Jacopo Mondi
2022-02-07 16:39 ` Laurent Pinchart
2022-01-31 14:32 ` [PATCH 08/21] media: ov5640: Re-sort per-mode register tables Jacopo Mondi
2022-02-01 19:05 ` Laurent Pinchart
2022-02-07 14:42 ` Jacopo Mondi
2022-01-31 14:32 ` [PATCH 09/21] media: ov5640: Remove ov5640_mode_init_data Jacopo Mondi
2022-02-01 19:07 ` Laurent Pinchart
2022-02-07 14:45 ` Jacopo Mondi
2022-01-31 14:32 ` [PATCH 10/21] media: ov5640: Add HBLANK control Jacopo Mondi
2022-02-02 21:20 ` Laurent Pinchart
2022-01-31 14:32 ` [PATCH 11/21] media: ov5640: Add VBLANK control Jacopo Mondi
2022-02-02 21:35 ` Laurent Pinchart
2022-02-07 15:09 ` Jacopo Mondi
2022-02-07 17:22 ` Laurent Pinchart
2022-02-03 7:58 ` Xavier Roumegue (OSS)
2022-02-07 15:12 ` Jacopo Mondi
2022-01-31 14:44 ` [PATCH 12/21] media: ov5640: Fix durations to comply with FPS Jacopo Mondi
2022-01-31 14:44 ` [PATCH 13/21] media: ov5640: Initialize try format Jacopo Mondi
2022-02-02 21:51 ` Laurent Pinchart
2022-01-31 14:44 ` [PATCH 14/21] media: ov5640: Implement get_selection Jacopo Mondi
2022-02-02 22:29 ` Laurent Pinchart
2022-02-07 15:47 ` Jacopo Mondi
2022-02-07 17:53 ` Laurent Pinchart
2022-02-08 14:18 ` Jacopo Mondi
2022-02-08 14:41 ` Laurent Pinchart
2022-01-31 14:44 ` [PATCH 15/21] media: ov5640: Limit format to FPS in DVP mode only Jacopo Mondi
2022-02-02 22:38 ` Laurent Pinchart
2022-02-07 15:49 ` Jacopo Mondi
2022-01-31 14:44 ` [PATCH 16/21] media: ov5640: Disable s_frame_interval in MIPI mode Jacopo Mondi
2022-02-02 22:40 ` Laurent Pinchart
2022-02-02 21:48 ` [PATCH 12/21] media: ov5640: Fix durations to comply with FPS Laurent Pinchart
2022-02-07 15:58 ` Jacopo Mondi
2022-01-31 14:45 ` [PATCH 17/21] media: ov5640: Register device properties Jacopo Mondi
2022-01-31 14:45 ` [PATCH 18/21] media: ov5640: Add RGB565_1X16 format Jacopo Mondi
2022-02-02 22:48 ` Laurent Pinchart
2022-01-31 14:45 ` [PATCH 19/21] media: ov5640: Add RGB888/BGR888 formats Jacopo Mondi
2022-02-02 22:49 ` Laurent Pinchart
2022-02-02 22:44 ` [PATCH 17/21] media: ov5640: Register device properties Laurent Pinchart
2022-01-31 14:45 ` [PATCH 20/21] media: ov5640: Restrict sizes to mbus code Jacopo Mondi
2022-01-31 14:45 ` [PATCH 21/21] media: ov5640: Adjust format to bpp in s_fmt Jacopo Mondi
2022-02-02 23:03 ` Laurent Pinchart
2022-02-07 16:07 ` Jacopo Mondi
2022-02-07 16:46 ` Laurent Pinchart
2022-02-02 22:57 ` [PATCH 20/21] media: ov5640: Restrict sizes to mbus code Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YflBlm7aeslZW4es@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=Eugen.Hristev@microchip.com \
--cc=aford173@gmail.com \
--cc=festevam@gmail.com \
--cc=hugues.fruchet@st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jbrunet@baylibre.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mirela.rabulea@nxp.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=sakari.ailus@iki.fi \
--cc=slongerbeam@gmail.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).