From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Hans Verkuil <hans.verkuil@cisco.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org, Andrzej Hajda <a.hajda@samsung.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Maxime Ripard <maxime.ripard@bootlin.com>
Subject: [PATCH v2 5/5] DO NOT MERGE: ARM: dts: bananapi: Add Camera support
Date: Mon, 28 Jan 2019 15:52:36 +0100 [thread overview]
Message-ID: <b1279df2faefbb50120270417c3f5d66bb52df18.1548687041.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.ba7411f0c7155d0292b38d3dec698e26b5cc813b.1548687041.git-series.maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 94 +++++++++++++++++++++++++-
1 file changed, 94 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 556b1b591c5d..f5fee1f95900 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -54,6 +54,9 @@
compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
serial0 = &uart0;
serial1 = &uart3;
serial2 = &uart7;
@@ -63,6 +66,41 @@
stdout-path = "serial0:115200n8";
};
+ reg_cam: cam {
+ compatible = "regulator-fixed";
+ regulator-name = "cam";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_vcc5v0>;
+ gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_cam_avdd: cam-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "cam500b-avdd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <®_cam>;
+ };
+
+ reg_cam_dovdd: cam-dovdd {
+ compatible = "regulator-fixed";
+ regulator-name = "cam500b-dovdd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_cam>;
+ };
+
+ reg_cam_dvdd: cam-dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "cam500b-dvdd";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <®_cam>;
+ };
+
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -116,6 +154,26 @@
>;
};
+&csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi0_pins_a>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi_from_ov5640: endpoint {
+ remote-endpoint = <&ov5640_to_csi>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
&de {
status = "okay";
};
@@ -161,6 +219,36 @@
};
};
+&i2c1 {
+ status = "okay";
+
+ camera: camera@21 {
+ compatible = "ovti,ov5640";
+ reg = <0x21>;
+ clocks = <&ccu CLK_CSI0>;
+ clock-names = "xclk";
+ assigned-clocks = <&ccu CLK_CSI0>;
+ assigned-clock-rates = <24000000>;
+
+ reset-gpios = <&pio 7 14 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+ AVDD-supply = <®_cam_avdd>;
+ DOVDD-supply = <®_cam_dovdd>;
+ DVDD-supply = <®_cam_dvdd>;
+
+ port {
+ ov5640_to_csi: endpoint {
+ remote-endpoint = <&csi_from_ov5640>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+};
+
&i2c2 {
status = "okay";
};
@@ -242,6 +330,12 @@
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
"", "", "", "", "", "", "", "";
+ csi0_pins_a: csi_pins_a@0 {
+ pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10", "PE11";
+ function = "csi0";
+ };
+
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
--
git-series 0.9.1
prev parent reply other threads:[~2019-01-28 14:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-28 14:52 [PATCH v2 0/5] media: Allwinner A10 CSI support Maxime Ripard
2019-01-28 14:52 ` [PATCH v2 1/5] dt-bindings: media: Add Allwinner A10 CSI binding Maxime Ripard
2019-01-28 16:17 ` Rob Herring
2019-01-29 11:52 ` Sakari Ailus
2019-01-28 14:52 ` [PATCH v2 2/5] media: sunxi: Refactor the Makefile and Kconfig Maxime Ripard
2019-01-28 14:52 ` [PATCH v2 3/5] media: sunxi: Add A10 CSI driver Maxime Ripard
2019-01-29 12:39 ` Sakari Ailus
2019-02-06 21:16 ` Maxime Ripard
2019-02-08 23:17 ` Sakari Ailus
2019-02-06 22:59 ` Ezequiel Garcia
2019-02-08 20:19 ` Maxime Ripard
2019-01-28 14:52 ` [PATCH v2 4/5] ARM: dts: sun7i: Add CSI0 controller Maxime Ripard
2019-01-28 14:52 ` Maxime Ripard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b1279df2faefbb50120270417c3f5d66bb52df18.1548687041.git-series.maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=a.hajda@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).